焊接强度用英语怎么说,焊接强度的英文翻译


词语导航

基本信息

词语:焊接强度

繁体:焊接強度

拼音:hàn jiē qiáng dù

英语翻译

【化】 weld strength

分词翻译

焊接的英语翻译:

seal; solder; weld
【医】 solder; soldering

强度的英语翻译:

intension; intensity; strength
【计】 intensity
【化】 strength
【医】 intensity; strength

翻译例句

1. 为了评价焊接强度,还进行了抗弯强度(扭矩)测试。

Bending (torque) test was also performed to evaluate strength of the brazed joints.

2. 综合这两点改进,焊接强度大大优于普通门窗焊接设备。

All in all, the welding strength is much better than common welding machine.

3. 目的研究在不同参数设置下激光焊接对钴铬合金焊接强度的影响。

Objective To study the effect of different factor settings on the strength of Co Cr alloy welded by laser.

4. 电阻点焊接头的焊接强度由母材和熔核的材料属性及几何特征决定。

Strength of resistance spot weld is determined by the physical attributes of weldment including material and geometric issues.

5. 应用二次脉冲电流,改变电阻焊熔核的金属组织结构,达到提高焊接强度的目的。

The twice impulse process is employed to change the metallic structure of the resistance welding so as to improve the welding strength.

6. 激光焊接薄壁钻头的显著特点是钻齿焊接强度高,不掉齿,可以用于无水干钻,便于实现大批量规模化生产。

Laser welding thin wall bit is characterized by high welding strength of bit teeth, no falling out of the teeth and mass production by non water dry drilling.

7. 试验结果表明,焊后炉中冷却始温对焊缝焊接强度影响最大,冷却时间次之,焊前脱水方式对焊接强度影响最小。

The test results indicate that cooling beginning temperature after brazing is most influential to its joint strength, then the cooling hours and finally the way of dehydrating before brazing.

8. 提供一种表面安装部件,其可以缓和对制造工序中的构成组件产生的冲击,并使表面安装后的焊接强度的达到充分大。

Provided is a surface mounting component wherein a shock applied to constitution members in manufacturing process is reduced and sufficient solder bonding strength is achieved after surface mounting.www.WENTiYi.cOM

9. 分析了硬质合金微型钻头加工时的受力状态,根据钎焊硬质合金刀具的强度指标要求,研究了刀具焊接强度的检测方法。

The cutting loads of cemented carbide drilling tool in drilling PCB are analyzed, a method applied to testing the brazing strength of cemented carbide cutters is studied.

10. 系统的应用,降低了操作者劳动强度,显著降低了废品率和返修率,提高了焊接生产率。

The application of this system reduce handlers work intensity, and remarkably reduce reject ratio and returning rate, and enhance welding productivity.

11. 基本上,这些需求的钢管材料,都具有足够大的强度,韧性,良好的焊接能力以及耐腐蚀介质。

Basically, those steel pipe materials which, with adequately high strength, show sufficient toughness, good welding behaviour and resistance to corrosive media are in demand.

12. 本文介绍了焊接残余应力对金属结构的静强度、脆性断裂以及应力腐蚀开裂的影响。

The paper discusses over the influence exerted by welding residual stress on the static strength, brittle fracture and stress-corrosion cracking of metal structure.

13. 无基材结构变形的影响,无变形及塌陷,焊接后强度减小和龟裂。

No substrate deformation and collapse, no strength reduction and cracks after welding.

14. 因此,镇静钢材主要用于低温下承受冲击的构件、焊接结构及其他要求强度较高的构件。

Therefore, the steel is mainly used for low temperature impact of the impact of the components, welding structure and other requirements of higher strength components.

15. 吊车轨道的材料由于其含碳量较高,强度大,可焊性较差,焊接时容易产生裂纹, 因此要严格按照工艺执行。

Material for rail of crane is of strong strength because of high carbon content, but of poor weldability, which makes more cracks. Strict technique is required in such welding.

16. 第二,也是最重要的一点,很多高强度铝合金不可使用惯用的技术焊接。

Second, and most importantly, many of the strongest aluminum alloys are not weldable using conventional techniques.

17. 用国际焊接学会推荐的方法进行统计处理,并和相同接头形式结构钢的疲劳强度进行了比较。

Moreover, the test data were statistical treated with the method recommended by IIW and compared with fatigue strength of structural steel with identical joint type.

18. 焊接接头强度、塑性均可达到与母材相当的水平。

The strength and plasticity of welds were equivalent to the base metal.

19. 顶盖为Q 235钢板焊接结构,具有足够的刚强度。

Head cover is of a welded structure of the Q235 steel plate with sufficient strength.

20. 用于相同强度等级的低合金高强钢的焊接。

For welding low-alloy and high strength steel with corresponding strength grade.

21. 应采用低氢焊条焊接厚钢板与铸钢件和高强度板间的连接。

Low hydrogen electrode to be used for welding thick steel plate to casting and high tensile plates.

22. 强度较高,且韧性、焊接性及低温韧性也较好,被广泛用于制造桥梁、锅炉、船舶等大型结构。

High strength, toughness, weldability and low temperature toughness is also widely used in the manufacture of Bridges, boilers, ships and other large structures.

23. 实验结果显示,采用逆变焊机进行焊接,焊点的平均强度有所提高,飞溅率和未焊合率均有大幅度降低。

The experiment shows that by using inverter spot welding, the average intensity of the welded spot is increased while the splash rate and the incomplete penetration rate are descend.

24. 船舶焊接是保证船舶密性和强度的关键。

The ships welding is guarantees ships dense and the intensity key.

25. 由于镁合金不填丝的TIG焊接接头强度低,焊缝表面成型不好,所以,镁合金的填丝tig焊接方法不可避免。

Because TIG welded joints without filler wire always hold low strength and poor formation, tungsten inert gas welding process with filler wire is inevitable.

26. 沿焊接网的锚固长度的焊接点强度必须足够对抗设计应力。

P the strength of the welded joints along the anchorage length of welded fabric shall be sufficient to resist the design forces.

27. 通过激光焊接可将不同材质、不同强度、不同表面处理的钢板焊接在一起,以满足零件不同部位性能的需要。

By taking laser welding, different steel base, hardness, surface treatment sheet steel can be welded together to meet the special requirements of different parts.

28. 通过激光焊接可将不同材质、不同强度、不同表面处理的钢板焊接在一起,以满足零件不同部位性能的需要。

By taking laser welding, different steel base, hardness, surface treatment sheet steel can be welded together to meet the special requirements of different parts.

版权声明:问题易所有作品(图文、音视频)均来源网络,版权归原创作者所有,与本站立场无关,如不慎侵犯了你的权益,请联系我们告知,我们将做删除处理!