预埋件用英语怎么说,预埋件的英文翻译


词语导航

基本信息

词语:预埋件

繁体:預埋件

拼音:yù mái jiàn

英语翻译

【化】 built-in fitting; embedded part; inserted part; inserted parts
inserted piece; preembedded piece

相关词条

1.insertedpiece  2.preembeddedpiece  3.embeddedparts  4.embeddedinserts  5.built-infitting  

分词翻译

预的英语翻译:

beforehand; in advance
【医】 fore-

埋的英语翻译:

burying; cover up; inter

件的英语翻译:

a unit; letter

翻译例句

1. 预埋件、预留孔、预留洞等的位置和尺寸;

Place and size of built-in fitting, and other reserved holes / bore.

2. 安装简便,不需预埋件,均用膨胀螺栓固定即可。

Easy to install, no need of embedded parts, expansion bolts are enough for fixing.

3. 所设计的框架节点、预埋件及连接构造受力可靠。

The designed concrete joints, the embedded parts and the connectors function well and reliably.

4. 所有预埋件及预埋螺栓固定时均高精度水准仪测定其标高。

While fixing all embedded parts and embedded bolts, high precise level meter is required for measurement of elevation.wWW.WeNTiyI.com

5. 本发明公开了避免金属预埋件焊接高温烧坏混凝土基层的装置和方法。

The invention discloses a device for preventing high temperature caused by welding metal embedded parts from burning out concrete base layers and a method thereof.

6. 大体积混凝土结构基础设计和施工中裂缝、预埋件等的控制是工程界的热点。

The design of the bulk concrete structure for foundation and control of the cracks as well as embedded parts in construction are focuses in the engineering circle.

7. 本文详细介绍了高强覆膜竹胶板(大模板)施工工艺及预埋件的安装固定方法。

The techniques of construction and installation and fixing of embedded fittings are introduced.

8. 施工前,先清理现场,检查施工部位有没有水、暖、电等工种的预埋件,是否会影响板块的铺砌或铺粘;

Before the construction, it is necessary to clean the spot and check if there is Pre -embedded part of water heating electric and so on, if there is effect to lay and stick of the floor tile.

9. 针对M 10型预埋件的塑胶-锥体复合拉伸破坏形态,得出极限拉伸荷载的简化计算公式。

The simplified formula of ultimate tension load is obtained in view of mix plastic-cone tension failure mode of the M10 plastic embedded part.

10. 但在检查中发现一些工程主体结构完工之后,才考虑设预埋件,对预埋件的安装也不符和要求。

But some found in the inspection after the main structure completed project, to consider the embedded parts, discrepancy and requirements for the installation of embedded parts too.

11. 针对钢筋混凝土结构预埋件在计算方面存在的问题,进行了75组212件不同类型试件的试验。

To evaluate the problems existing in the calculation of built-in fittings in reinforced concrete structures, 75 series of tests consisting of 212specimens of various forms were made.

12. 本文针对幕墙各种预埋件形式,设计了一种通用、快速、简单方便、安全、可重复使用的试验装置。

In this paper, a test instrument which is universal, quick, simple, convenient, safe and repeatable has been designed for all kinds of built-in fittings in curtain wall.

13. 根据试验提供的条件建立预埋件有限元模型,并介绍了数值模拟过程中为保证分析正确性采取的措施。

Based on the experiment, a finite element model was built, and the measures for ensuring the analysis accuracy in the numerical simulation process were introduced.

14. 文章还根据预埋件在低周反复荷载作用下的试验结果,提出了在进行抗震强度验算时所需的强度折减系数。

This paper also presents a reduction factor of strength required for checking shock strength based on the test results of embedded elements under low period repeated loading.

15. 一般说来,剪切键承载能力主要受预埋件控制,但在制定现行规范时对多排多列角钢预埋件的试验研究较少。

Generally speaking the loading capacity of shear key is mainly governed by embedded part, while quite few test have been taken to the embedded part when the on -going specification is established.

16. 利用LS - DYNA求解器进行计算,考察了幕墙预埋件的抗拉承载力和抗剪承载力,并与试验结果进行比较。

Moreover, the LS-DYNA solver was adopted to investigate the tensile and shearing resistance capacity of the embedded part in curtain wall, and comparison with the experimental results was also made.

17. 本文通过6个试件,对钢桁架与混凝土核心筒之间采用单剪板连接时节点预埋件的不同构造方案进行了低周反复加载试验研究。

Cyclic loading tests of 6 specimens were carried out to investigate the performance of different details of embedded anchors for the single-plate connection between steel trusses and concrete walls.

18. 本文通过6个试件,对钢桁架与混凝土核心筒之间采用单剪板连接时节点预埋件的不同构造方案进行了低周反复加载试验研究。

Cyclic loading tests of 6 specimens were carried out to investigate the performance of different details of embedded anchors for the single-plate connection between steel trusses and concrete walls.

版权声明:问题易所有作品(图文、音视频)均来源网络,版权归原创作者所有,与本站立场无关,如不慎侵犯了你的权益,请联系我们告知,我们将做删除处理!