附着器用英语怎么说,附着器的英文翻译


词语导航

基本信息

词语:附着器

繁体:附著器

拼音:fù zhuó qì

英语翻译

【医】 attachment apparatus

分词翻译

附着的英语翻译:Www.wentIYI.COm

adhesion; attachment; coherence
【化】 adhesion; sticking
【医】 attachment; insertio; insertion

器的英语翻译:

implement; organ; utensil; ware
【医】 apparatus; appliance; crgan; device; organa; organon; organum; vessel

翻译例句

1. 这些已经在其他的加速中发现过,但是都是附着其它粒子而存在。

These have been detected in other accelerators but always attached to other particles.

2. 近年来,因为追踪的设计较大或较重,无法附着在小型鸟类身上,只能对较大型的鸟类进行追踪

Until recently, only larger birds could be followed using tracking devices, because the gadgets were too big and heavy to attach to small birds.

3. 直接附着于计算机的每个处理,使之不会过热。

Every processor in the computer has these tubes directly attached to them, so no processor in the system overheats.

4. 这很像在运行单元测试,但却附着了调试

This is like running the unit tests, but with the debugger attached.

5. 按下一个按钮,物体就被附着在了手里,但是它在固定的距离,把手变成一个弹射

With a press of a button, the object is attached to your hand, but stays at that fixed distance, turning your hand into a catapult.

6. 济南空调维修建议在清洗时,用吸尘或长毛软刷,按散热翅片顺向轻刷,除去附着的埃尘和脏物。

Ji "nan air conditioning maintenance recommendations in cleaning, vacuum cleaner or plush soft brush, press the fin forward brush, remove dust and dirt attached.

7. 这个过程发生,当肌球蛋白附着在细胞上,由细胞细胞上排列的微丝推动的时候。

The process occurs as myosin proteins attached to organelles push against microfilaments arrayed throughout the cell.

8. 目的研究使用牙附着式牵张行上颌牙槽骨牵张成骨术后牙髓和牙周的组织学改变。

Objective to observe the changes in dental pulp and periodontal tissues under the application of maxillary tooth-bone distraction osteogenesis using tooth-attached intraoral distractor.

9. 最后又结合轧机工况监测系统,使用附着式测力传感对轧制力进行在线监测,证明具有较好的使用效果。

With the monitoring system, the attached type ergometric sensor can be used for the online rolling force monitoring, which proves nice effect.

10. 介绍了附着式测力传感的结构、原理及实际应用,并从实用性、经济性及可操作性的角度对其进行了阐述。

This article has described the structure, principle of the attached type ergometric sensor and its actual application as well as its practicability, economy and operability.

11. 研究了厌氧附着膜膨胀床(AAFEB)反应在起动和稳态运行过程中生物膜性状的变化。

The variation of characteristics of the biofilm in anaerobic attached microbial film expanded bed (AAFEB) reactor during start up and steady state condition was studied.

12. 当反应未加填料时MLSS值稳定,加入填料后附着其上的微生物不断生长、增殖,悬浮生物由于食料竟争而被抑制,致使MLSS值降低,缓解了膜组件的污染;

Microbes attaching on the carriers fleetly develop and proliferate, it effectively reduces suspended-growth microbes or MLSS for food competition and also depresses fouling of membranes;

13. 经研究发现,电参数变化的原因是电位内部基片表面在生产时附着的脏污在高热潮湿环境下吸潮造成。

Discovery after study, the electric parameter change reason is the dirt adhered at the producing on the surface of potentiometer inner basic chip absorbs wet in high thermal wet ambient.

14. 为了获得附着力和汽车车身速度的精确估计值,将滑模控制思想引入了观测,得到了理想的效果。

To get the precise approximation of the tire force and the vehicle speed, the sliding mode control theory is proposed in observers, which bring about good effect.

15. 后碟制动蹄片有一个附着于蹄片外后部的消声弹簧,和一个在蹄片内部磨损指示

The rear disc brake shoes have an anti-rattle spring attached to the rear of the outboard shoe and a wear indicator on the inboard shoe.

16. 厌氧处理装置使用下流式厌氧生物滤池,其中菌胶团以生物膜的形式附着在填料上,进水从反应顶部注入。

Down stream anaerobic biological filter where waste-water poured from top was used as anaerobic processing device in which bacteria colloid was found on padding in biological membrane form.

17. 对厌氧附着膜膨胀床(AAFEB)反应运行过程中活性污泥的性状变化及其与反应效能的关系作了研究。

The changes of characteristics of the anaerobic activated sludge in the anaerobic attached microbial film expanded bed (AAFEB) reactor and their relation to the reactor performance were studied.

18. 可延展的微型LED显示,印制出来的微型LED相连成一张网,并附着在一个橡胶底层上。

Stretchable micro-LED display, consisting of an interconnected mesh of printed micro LEDs bonded to a rubber substrate.

19. 重点比较了反应附着相和悬浮相微生物的硝化特性。

The emphasis was put on comparison between nitrification characteristics of the suspended microorganism and that of the attached microorganisms in the reactor.

20. 论述了其设计过程,建立了调试控制算法的半实物仿真,针对典型附着路面进行了半实物仿真研究。

The process of design was described, the hardware-in-the-loop simulator used to debug control algorithms was erected, and the simulation of accelerating on typical roads such as ice and snow was made.

21. 使用橡胶皮吹小心的吹走任何附着在CMOS处理上的灰尘。

Use a rubber blower to carefully blow away any dust on the surface of the CMOS sensor.

22. 然后,让受试者在一个附着在杠杆系统上的移动着的镭射指示上标记目标物的位置。

Then they were asked to mark the location the target had been in by moving a laser pointer attached to the lever system.

23. 具有较好的耐含水变压油特性,高附着性、高耐刮性。

Uperior resistance to water content transformer oil, good performance in adhesion and abrasion scrape resistance.

24. 我厂生产的散热集装饰、取暖于一身,表面经磷化处理后采用专用塑粉静电喷涂,涂层附着力强,色泽艳丽。

Our factory produce radiator set decoration, heating on a surface by the phosphate treatment using special plastic powder electrostatic spraying, coating adhesion, strong, bright color.

25. 高的热交换皮肤温度能引起刻度以新鲜的空气不能够避免的方式附着

High heat exchanger skin temperatures can cause scale to adhere in a manner that ozone cannot prevent.

26. 高的热交换皮肤温度能引起刻度以新鲜的空气不能够避免的方式附着

High heat exchanger skin temperatures can cause scale to adhere in a manner that ozone cannot prevent.

版权声明:问题易所有作品(图文、音视频)均来源网络,版权归原创作者所有,与本站立场无关,如不慎侵犯了你的权益,请联系我们告知,我们将做删除处理!