控制摆用英语怎么说，控制摆的英文翻译

词语导航

基本信息

词语：控制摆

繁体：控制擺

拼音：kòng zhì bǎi

英语翻译

【电】 escapement

分词翻译

控制的英语翻译：WWw.wENTiyi.cOm

control; dominate; desist; grasp; hold; manage; master; predominate; rein
rule
【计】 C; control; controls; dominance; gated; gating; governing
【医】 control; dirigation; encraty
【经】 check; command; control; controlling; cost control; dominantion
monitoring; regulate; rig

摆的英语翻译：

arrange; place; put; sway
【化】 pendulum

翻译例句

1. 操作多路换向阀可分别控制摆臂油缸、支腿油缸或锁钩油缸的伸缩运动，完成吊装或卸料工作。

Operating multiple directional value can separately control the fore and aft motion of swing arm oil cylinder, outrigger oil cylinder or hook oil cylinder to finish working of hoisting or unloading.

2. 由于这类运动是确定性的，可以事先唯一地求出，由此设计出一种最优控制器，按照二次型最优消摆规律消除载荷摆振。

For this kind of motion is determinated, it is feasible to be worked out uniquely in advance and design an optimal controller to suppress the load sway according to the quadratic optimal law.

3. 很明显每个任务的时序安排对控制器的一个好的性能是至关紧要的，因此对一个摆的稳定性是有效的。

It is obvious that a correct scheduling of each task is crucial for a good performance of the controller, and hence for an effective pendulum stabilization.

4. 应用非线性系统跟踪控制方法对倒立摆系统的控制进行研究。

The stable control of the inverted pendulum system is studied with the nonlinear tracking control method.

5. 实时倒立摆被作为一个基准，去测试软件在状态空间控制器运算法则下的有效性和性能，也就是实用的操作系统。

The Real-Time Inverted Pendulum is used as a benchmark, to test the validity and the performance of the software underlying the state-space controller algorithm, i. e. the used operating system.

6. 利用息现代控制理论，针对倒立摆系统研究了极点配置方法和线性二次型最优控制方法，并利用MATLAB进行了仿真研究。

In the study of modern control theories, pole assignment and LQR are designed on inverted pendulum systems, and the MATLAB simulation is researched.

7. 介绍一种桥式卸船机抓斗的定位和防摆控制方法。

An anti-swing and position control of bridge type grab shipunloader is proposed.

8. 同时给出t - S模糊控制器应用于单倒立摆系统的一个实例，并用文中的稳定性分析方法分析它的系统稳定性。

In this paper, T-S fuzzy controller is applied to the single inverted pendulum system, which illustrate effectiveness of the stability design method.

9. 证明了最优调节器防摆、模糊控制防摆和自适应防摆等都有良好的防摆效果。

The experiment results of the methods such as optimal regulator control, fuzzy control and adaptive control show that satisfactory effects can be obtained with each one of these methods.

10. 对单级倒立摆系统的平衡控制问题进行了研究。

The balance control of a single inverted pendulum system is focused.

11. 引入动态伺服理论研究了欠驱动双摆机器人的仿生悬摆运动控制。

With dynamical servo control theory introduced, life-like brachiation control of underactuated two-link robot is studied.

12. LQR控制器用于倒立摆的控制模式，保持摆锤稳定在竖直向上不稳定状态点附近，使小车位移跟踪给定信号。

The LQR controller uses the pendulum control mode to keep the pendulum near the vertical up unstable state points and gives signals of car displacement tracking.

13. 桥式起重机运行过程中的防摆控制是起重机控制的一个关键问题，许多学者对此进行了大量的研究。

Control to load sway during operation of overhead traveling crane is a key problem and many studies have been done to solve the problem.

14. 将这种模糊自适应控制器应用到倒立摆系统的跟踪控制，仿真结果表明，它具有良好的控制性能，从而验证了该方法的有效性。

Simulation tests on the tracking control of the pendulum system have demonstrated the good performance of the controller and the effectiveness of this method.

15. 本文介绍了一个倒立摆微机控制装置的设计方法。

This paper presents a design method of an inverted pendulum microcomputer control device.

16. 文章中给出了平行摆系统的理论分析和实际控制结果。

Theoretical analysis of the pendulum system and the control results are given.

17. 最后通过编程实现了各种智能控制算法对倒立摆系统中的实物控制，均取得了令人满意的控制效果。

Finally realized the inverted pendulum system"s practicality control by each kind of intelligent control algorithm through programming, and obtained the satisfying control effect.

18. 控制器不依赖于倒立摆系统和混沌系统的模型函数。

The controllers do not rely on the models of the inverted pendulum and chaotic systems.

19. 对摆式客车检测装置、控制和监视装置、倾摆机构等进行了分析，提出了建议采用的研制方案。

The test equipment, control and monitor equipment, tilting mechanism of the tilting passenger cars are analyzed. The suggested development scheme is put forward.

20. 利用自适应高阶微分反馈控制器实现倒立摆的鲁棒镇定与调节，实现了SISO和MIMO混沌系统控制与同步。

We applied successfully the proposed adaptive HODFC to the inverted pendulum stabilization and regulation, and the SISO and MIMO chaotic system control synchronization.

21. 将一种新的能抑制系统残留振荡的时滞滤波器技术应用到起重机的消摆控制中，有效地消除了载荷的摆动。

In this paper, time delay filter technique is applied to the anti sway control of cranes with load and is shown to significantly eliminate load residual sway.

22. 近年来，很多学者对桥式起重机的防摆控制方法进行了研究，以提高起重机的作业效率。

Recently, many approaches have been implemented for anti-swing control of overhead cranes in order to improve the operational efficiency.

23. 针对倒立摆的位移控制，提出一种非线性滑模变结构控制方法。

A nonlinear sliding mode control method is presented for single inverted pendulum position tracking control.

24. 在此模型中，把实车上使用的控制软件和车辆数值计算机械结构模型结合起来，再现了倾摆主动控制装置的动力学。

In the model the dynamics of the tilting active control devices are reproduced, combining the numerical mechanical model of the vehicle with the control software used on the real vehicle.

25. 该方法采用环路成形技术设计倒立摆控制器，对权函数采用遗传算法进行优化。

The controller of inverted pendulum is designed by using the loop shaping technique. GA is adopted to optimize the weighing functions.

26. 针对吊车系统定位和防摆的控制要求，提出了一种基于嵌套饱和方法的非线性控制策略。

A nonlinear control strategy based on nested saturation approach is presented for an overhead crane to achieve positioning and anti-swing control.

27. 为了实现对具有弹性的不稳定机械系统的控制，对弹性倒立摆的动态稳定性控制进行了研究。

For realizing the control of elastic unstable mechanical system, the dynamic stability control of an inverted flexible pendulum has been studied.

28. 预加重，电压摆幅，摆率控制。

Pre-emphasis, Voltage Swing, Slew Rate Control.

29. 预加重，电压摆幅，摆率控制。

Pre-emphasis, Voltage Swing, Slew Rate Control.