交酯用英语怎么说,交酯的英文翻译


词语导航

基本信息

词语:交酯

繁体:交酯

拼音:jiāo zhǐ

英语翻译

【化】 cyclic diester; lactide

分词翻译

交的英语翻译:

associate with; bargain; deal; deliver; fall; friend; hand over; join; meet
mutual; relationship
【医】 venery

酯的英语翻译:

ester
【化】 ester
【医】 compound ether; ester; lactam; lactan

翻译例句

1. 聚丙交酯乙交酯涂层表面黏附血小板较多,个别血小板变形伸出伪足。

The adhesion platelets of PLGA coating were more, and some platelets deformed and the parapodium stretched out.

2. 对聚丙交酯的合成和热稳定性进行了研究。

The synthesis and thermal stability of poly(L-lactide)were investigated.

3. 热稳定剂对聚丙交酯的分子量几乎没有影响。

The thermal stabilizing agent did not significantly affect the polymer molecular weight.

4. 聚乳酸的合成方法主要有两种:乳酸直接聚合和丙交酯开环聚合。

Polylactic acid synthesis in two major ways:direct polymerization and lactate lactide ring-opening polymerization.

5. 聚乳酸的合成主要有两种方法:乳酸直接缩聚和丙交酯的开环聚合。

There are two main methods to synthesis PLA, condensation polymerization of lactic acid and ring-opening polymerization of lactide.

6. 聚乳酸的合成主要有两种方法:丙交酯的开环聚合和乳酸直接缩聚。

There are two main methods to synthesis PLA, ring - opening polymerization of lactide and condensation polymerization of lactic acid.

7. 由丙三醇、丙交酯和反丁烯二酸制得一含碳碳双健的低分子量聚酯。

A low molecular weight poly (DL lactide) containing carbon carbon bonds was synthesized from DL lactide, glycerin and fumaric acid.

8. 实验表明在高于聚合物熔点温度以上,聚丙交酯表现出热不稳定性。

It was found that poly (L-lactide) is thermally unstable above its melting temperature.WWw.wentIyI.Com

9. 聚乳酸的制备多采用乳酸脱水生成丙交酯,然后开环聚合成聚乳酸。

Lactide, which was synthesized through lactic acid condensation, was polymerized to form PLA by ring-opened of lactide.

10. 本文主要进行了丙交酯的合成工艺研究及聚乳酸的开环聚合工艺研究。

We use the method of decomposing PLA to synthesize lactide by means of orthodoxical experiment method.

11. 以环烷氧锡化合物引发L-丙交酯开环聚合制备高分子量聚L-乳酸。

Poly(L-lactide)(PLLA) was synthesized by ring-opening polymerization of L-lactide using cyclic tin alkoxide compound as initiator.

12. 目的考察内相乙醇加入量及其他制备因素对聚丙交酯微球性质的影响。

OBJECTIVE To investigate the effect of adding ethanol in inner organic phase on the properties of poly (d, 1-lactide) microspheres.

13. 聚丙交酯乙交酯涂层表面黏附血小板较多,个别血小板变形伸出伪足;

The adhesion platelets of PLGA coating were more, and some platelets deformed and the parapodium stretched out;

14. 乳酸经减压蒸馏制得单体丙交酯,再以氧化锌为催化剂聚合得到聚乳酸。

Lactide monomer was obtained by vacuum distillation of lactic acid. After purification by recrystallization, the lactide was polymerized to polylactic acid with zinc oxide as the catalyst.

15. 为提高L -丙交酯的纯度和产率,对l -丙交酯的制备技术进行改进。

Preparation technique was ameliorated in order to improve purity and yield of L-lactide.

16. 二种组成比不同的丙交酯—乙交酯共聚物以溶剂挥发法制成含炔诺酮的微球。

The different lactide-co-glycolide ratio of the PLGA microspheres containing NET was prepared by a solvent-evaporation process.

17. 本工艺不但可降低丙交酯的生产成本,而且解决了厨房垃圾的环境污染问题。

This technology can not only reduce the cost of producing lactide , but also solve the pollution problems from kitchen garbage.

18. 采用二步法由乳酸制备丙交酯,由丙交酯的开环聚合制备高分子量的聚乳酸。

In this paper, the polylactic acid is synthesized by two-step method from lactic acid to lactide, then open-ring polymerize to PLA (polylactic acid).

19. 实验表明,这两种方法可分别定量测定丙交酯中残存乳酸和水,且简捷实用。

The test showed that both methods were suitable for the quantitative determination of residual lactic acid and water in lactide, they were simple, convenient and easily applicable.

20. 丙交酯在甘露糖醇分子上引发聚合得到的ML—PLLA具有低熔体粘度的特性。

ML-PLLA was synthesized by ring-opening polymerization of L-lactide in the presence of mannitol, it has the characteristic of low melt viscosity.

21. 本发明公开了一种高收率连续化精馏提纯丙交酯的方法,属于化工精馏提纯领域。

The invention discloses a method for continuously rectifying and purifying the lactide with high yield rate, which belongs to the field of chemical and industrial rectification and purification.

22. 结果表明,接枝共聚物具有较短的聚l -丙交酯(PLLA)和聚乙交酯(PGA)侧链。

The results showed that the graft copolymers had short PLLA and PGA lateral chain.

23. 研究了D,L -丙交酯在浓硫酸催化作用下与正丁醇进行酯交换反应合成乳酸丁酯的条件。

Butyl lactate was synthesized by the ester exchange reaction of d, L-lactide and n-butanol under the catalysis of sulfuric acid.

24. 本发明还涉及一种生产聚丙交酯的聚合装置和再循环在生产聚丙交酯中产生的工艺蒸汽的方法。

The invention also relates to a polymerisation device for producing polylactide and to a method for recycling process steam produced during the production of polylactide.

25. 丙交酯的产率低,同时聚乳酸的亲水性差,降解速度慢,限制了聚乳酸在生物医药领域的应用。

However, the yield of lactide wasn"t satisfical, and hydrophilicity of PLA was so bad that it leaded to low degradation rate, these shortcomings limited its use in some biomedical fields.

26. 本发明涉及一种冷凝和洗涤装置,尤其是可以再循环和清洁在生产聚丙交酯中产生的工艺蒸汽。

The invention relates to a condensation and washing device which can recycle and clean, in particular, process steam that is produced during the production of polylactide.

27. 通过优化丙交酯与乙交酯比例及加入特殊的聚合物末端基来获得特殊的药物-聚合物间相互作用。

Specific drug–polymer interactions are engineered by optimizing the lactide to glycolide ratio and including specific polymer end groups.

28. 聚乳酸(PLA)是一种线性脂肪族聚酯的聚乳酸中自然产生的或由丙交酯开环缩合催化剂组产生。

Polylactic acid (PLA) is a linear aliphatic polyester produced by poly-condensation of naturally produced lactic acid or by the catalytic ring opening of the lactide group.

29. 通过傅立叶红外光谱和氢核磁谱(1H NMR)测试表明所合成的丙交酯和乙交酯具有环状结构。

The resulted D, L-lactide and glycolide were found to have ring structure by fourier transform infrared spectrometry and proton nuclear magnetic resonance(1H NMR) spectrometry.

30. 通过傅立叶红外光谱和氢核磁谱(1H NMR)测试表明所合成的丙交酯和乙交酯具有环状结构。

The resulted D, L-lactide and glycolide were found to have ring structure by fourier transform infrared spectrometry and proton nuclear magnetic resonance(1H NMR) spectrometry.

版权声明:问题易所有作品(图文、音视频)均来源网络,版权归原创作者所有,与本站立场无关,如不慎侵犯了你的权益,请联系我们告知,我们将做删除处理!