可靠度控制用英语怎么说，可靠度控制的英文翻译

词语导航

基本信息

词语：可靠度控制

繁体：可靠度控制

拼音：kě kào dù kòng zhì

英语翻译

【电】 reliability control

分词翻译

可靠度的英语翻译：

【电】 reliability

控制的英语翻译：

control; dominate; desist; grasp; hold; manage; master; predominate; rein
rule
【计】 C; control; controls; dominance; gated; gating; governing
【医】 control; dirigation; encraty
【经】 check; command; control; controlling; cost control; dominantion
monitoring; regulate; rig

翻译例句

1. 结论：本方法简便可靠、灵敏度高、专属性及重现性好，可用于本品的含量测定及质量控制。

CONCLUSIONS: This method is simple, reliable, sensitive, specific and reproducible, and suitable for the determination and quality control of Sukeganmao capsules.

2. 结论该方法快速简便，准确可靠，灵敏度高，可用于银翘合剂的质量控制。

Conclusion This method was rapid, sensitive and accurate, it can be used for quality control of Yinqiao mixture.

3. 传动机构的动作可靠度是机构性能的一个重要指标，其动态特征的分析对实施有效控制有重要意义。

The performance reliability of transmission mechanisms is an important feature of the performance, analysis of the dynamic characteristics is of significance to enforcement of effective control.

4. 在同时考虑产品成本价值和全寿命期失效损失期望前提下，提出了以动态可靠度为控制参数的全寿命优化设计模型。

In consideration of cost and whole life loss expectation of product, the whole life optimization design model with control parameter of dynamic reliability is proposed.

5. 余度设计是提高电传飞行控制系统安全性与任务可靠性的一种重要手段。

Redundancy management is a key means of improving the reliability of safety-critical flyby-wire flight control systems.

6. 这种高压变频器设计新颖、独特，功率器件少、结构简洁，可靠性高，负荷均衡、线性度好，具有良好的控制特性。

The high voltage inverter is of novel design, fewer power devices, simple structure, high reliability, balanced load distribution, good linearity and ideal control properties.

7. 通孔技术需要能满足对轮廓形状的控制(包括控制倾斜度、形状、粗糙度、过刻蚀等)，同时又要求工艺能具有可靠性、实用性和重复性，最后，成本也要能被合理控制。

Through via technology should satisfy control requirement of outline, including tilt, shape, roughness, over-cut, and so on. The reliability, usability and duplication should be satisfied.

8. 结论方法简便、分离度好、结果准确可靠，可用于胆石消口服液的质量控制。

CONCLUSION the method is simple, accurate and reliable, and can be used for the quality control of Danshixiao oral solution.

9. 采用气缸压控复卷松紧度，控制可靠，操作方便。

It USES air cylinder to control tightness degree of rewinding, which is reliable and convenient in operation.

10. 分析了混凝土构件的碳化控制可靠度，并给出了估计混凝土构件碳化寿命的方法。

Furthermore, the paper analyzes carbonation reliability life of reinforced concrete members and gives a method to estimate carbonation life of reinforced concrete members.

11. 回路过程控制器是分布控制系统中散度可达到一个回路的智能化仪表。具有可靠性高，功能强，灵活性好等特点。

Circuit process controller is an intelligent instrument witch divergence in distributed control system can reach one loop, with the property of high reliability, rich function and well flexibility.

12. 采用分区控制的方式管理和规划电网，可以提高电网控制中心稳定的冗余度，提高系统运行的可靠性。

It is concluded that zoning control for power grid management and planning can improve the stability redundancy of power grid control centers and raise the reliability of the system.

13. 进行可靠性计算，获得典型螺纹连接结构的力矩法控制预紧力的可靠度。

According to the calculation of reliability, we get the reliability of the typical screw joint structures the preload.WWW.wentIYI.COM

14. 结论该方法快速简便，准确可靠，灵敏度高，可用于解痉镇痛酊的质量控制。

Conclusion This method is rapid, sensitive and accurate, and it can be used for quality control of Jiejing Zhentong Tincture.

15. 应用单片微机作为系统的控制单元，提高了密封罐头真空度无损检测系统的分选精确度和可靠性。

A single chip micro computer is used as the control unit of the system which improve classification accuracy and reliability for nondestructive test of Vacuum in the cans.

16. 严格控制，品质可靠，产品一次合格率大于97%；快速响应，服务周到，顾客满意度优于93%。

For more than 97% qualification rate with strict control and reliable character. For better than 93% customer satisfaction with quick response and consider service.

17. 对综合控制软件的任务剖面进行了分解，并给出了软件在系统测试与飞行试验阶段运行可靠度的计算方法。

Then, based on the decomposition of task section plane of general missile control software, the procedures for the operational reliability .

18. 余度技术是提高飞行自动控制系统可靠性的有效手段。

The redundancy technique is an effective way to increase reliability.

19. 控制系统采用微处理器DS80C320和可编程单片机外围器件PSD854F2组成最小系统，具有可靠性好，集成度高，配置灵活，可扩展性好的特点。

The core of control system consists of MCU DS80C320 and Programmable System Device PSD854F2, which features high reliability, high integrity , flexible configuration and wonderful extensibility.

20. 因此，提供了一种图像处理装置及其控制方法，它们可以以低制造成本和高可靠度去除余像，而不会被可视地识别出。

Thus, an image processing apparatus and a control method thereof are provided which can remove an afterimage at a low manufacturing cost and with high reliability without being visually recognized.

21. 控制支撑高度误差和玻璃的平整度，保证受力的均匀，可增加真空玻璃的强度，增加其可靠性，提高其使用寿命。

The brace height uniformity and the glass flatness should be controlled so as to guarantee force equality, which could improve strength, dependability and service life of the vacuum glass.

22. 提出了确定混凝土保护层厚度的三种可靠度方法，着重研究了以承载能力可靠度的降低为控制条件的混凝土保护层厚度确定问题。

In this paper, three approaches are presented for determining concrete cover depth of reinforced concrete structures, with emphasis on ultimate limit state reliability based approach.

23. 通过不同的检测方法检测，找出不同方法之间的相关性，确保检测数据可靠，达到控制密实度、力学性能质量的要求。

By different kind of test methods, find out relativity between different methods. So we can reach the control of compactness, mechanics capability quality requirement.

24. 按此方法设计的稳定真空度混合器，能够根据发动机负荷的变化而控制空燃比，且工作安全可靠。

The stable-vacuum mixer designed by this way is able to control air fuel ratio in confromity with the variations of engine load and ensures to operate safely and reliably.

25. 本文提出一个以房屋层间位移为控制指标的抗震可靠度计算方法。

In this paper a method for prediction of seismic reliability of multi-storey building with a storey displacement criterion is proposed.

26. 通过对事故发生的机理分析，探讨控制事故的可靠度，确定了控制事故的优选次序。

This paper discusses the reliability of controlling accident and confirms the optimal selection of controlling accident, which is based on the mechanism analysis of accident taken place.

27. 从控制薄壁内压容器在不同工况下最小初始可靠度的角度，对其试验压力系数进行了探索。

An approach was made of the test pressure coefficient based on the requirement of controlling the minimal virgin reliability of the thin wall internal pressure...

28. 利用概率分析方法研究在实故障源作用下，由函数单元构成的控制系统的可靠性，并给出了系统不可靠度的下界估计。

The reliability of the systems affected by the failure sources is studied and a lower bound of the unreliability is presented.

29. 结论表明，计算模型的正确性决定评价结果的可靠性，力学参数控制评价结果的精确度。

The study results show that the reliability assessed conclusion is chosen by the correctness calculated model, and the precision evaluated conclusion is chosen by the mechanical parameter.

30. 环境样品分析结果的准确与否关系到环境质量分析的准确度，没有可靠的数据质量控制方法，数据的可靠性就无从得到保证。

The accuracy of environmental quality analysis depends on the accuracy of analytical data. Lack of quality control method leads to unreliable data.