词语导航
基本信息
词语：焊接电源
繁体：焊接電源
拼音：hàn jiē diàn yuán
英语翻译
【化】 welding source
相关词条
1.sourceofweldingcurrent分词翻译
焊接的英语翻译：
seal; solder; weld【医】 solder; soldering
电源的英语翻译：
electrical source; power source; power supply【计】 power source; power supply; PS; supply power
【化】 current source; electric source; power source; power supply
supply source
翻译例句
1. 具有多种功能选择，可以作为自动焊接电源。
With various functions, it can be used as automatic welding power supply.
2. 一种普通的电弧焊接电源，安全可靠，易于使用。
Is used as an ordinary arc soldering power source, safely, reliable and easy to use.
3. 送丝系统的数字化可实现与数字化焊接电源的接口。
The wire feeding system realizes interface with the digital welding source.
4. 送丝系统的数字化可实现与数字化焊接电源的接口。
The wire feeding system realized interface with the digital welding source.
5. 对方波交流焊接电源电抗器电感量的选择作了介绍。
The inductance of energy storage reactor in square wave AC welding has been chosen and analyzed.
6. 因此对脉冲mig焊接电源的研究具有很大的实际意义。
So research on the Pulsed MIG welding power source becomes more and more important.
7. 晶闸管焊接电源由于其自身特点，仍然具有潜力可挖掘；
The SCR controlled welding power source is potential to be developed.
8. 注：送丝速度及焊接电压设置范围与配套焊接电源相关。
Note: the wire feeding speed and the welding voltage are dependent on the selected welding power.
9. 将嵌入式系统应用于电站锅炉膜式壁多台焊接电源的群控。
Applying embedded system in the group control of multi welding powers of Membrane Water Wall.
10. 注：送丝速度及焊接电压设置范围与配套焊接电源相关。
Note: the wire feeding speed and welding voltage set range are dependent on the selected welding power.
11. 介绍了基于数字信号处理器（DSP）控制的焊接电源结构。
This paper introduces the frame of a welding power source based on Digital Signal Processor(DSP).
12. 论文建立了基于DSP的数字化脉冲m IG焊接电源系统。
In the paper, Pulsed MIG welding power source system is designed based on DSP.
13. 基于DSP的多焊接电源群控系统被应用于膜式水冷壁焊机中。
A group control system of multi welding power supplies based on DSP was applied to membrane water wall welding machines.
14. 手工电弧焊的设备包括焊接电源、电流调节器、焊钳及电缆线。wwW.WentIYi.COM
Equipments for manual arc welding consist of power source, current regulator, electrode holder and cables.
15. 交流TIG焊接电源可用来焊接铝、镁等表面有致密氧化膜的金属。
The power supply of ac TIG welding can be used to weld aluminium and magnesium which surface has a firm oxide layer.
16. 开始送丝后，焊接电源输出低电平，熔滴依靠送丝动量向熔池过渡。
When the wire being stopping, the welding power outputs high level voltage with wire burning back and forming a liquid weld metal drop.
17. 在选定了控制器后，列出了整个焊接电源的设计思路、方案和目标。
After made sure controller, the paper given design thoughtfulness, project and aim for the welding power.
18. 介绍了所研制的具有自调整换向功能的大功率变极性等离子弧焊接电源。
A novel variable polarity plasma arc welding (VPPAW) power supply is introduced in this paper.
19. 介绍了氩气保护自动堵孔焊技术及其所用设备、换气焊接系统、焊接电源等。
The technology and equipment of automatic stop up hole welding with argon gas protection, scavenging welding technique and welding power supply are introduced.
20. 经试验证明，研制的焊接电源稳定可靠，基本实现了焊接电源控制的数字化。
The experiment testified that welding power source based on DSP is stabile, reliable which can realizes digital con trolling.
21. 同时数字化器件不断应用到新型焊接电源的研究中，又为其带来了新的生命力。
At the same time, the digital devices are continuously being applied in researching of new welding machine, which brings new vital energies.
22. 在焊接电源的充电回路中设计了三相桥式半控、恒流高效充电回路，取消了限流电阻；
A three phase half controlled bridge circuit with constant current and high efficiency is designed in the charged loop of the welding power supply. So a limiting current resistance is canceled.
23. 论述了一种电流波形控制的逆变co2焊接电源，包括电流波形控制方案、系统构成等。
CO2 welding inverter with waveform control was expounded, in which the current waveform control scheme and the structure of the system were introduced.
24. 介绍一种基于ZCS-PWM（零电流开关-脉宽调制）技术的新型超音频感应焊接电源。
The paper presents a novel ultra-audio frequency (UAF) induction welding power based on ZCS-PWM(Zero Current Switching-Pulse Width Modulation) technology.
25. 螺旋埋弧焊钢管焊接过程中因直流焊接电源的影响会产生磁场，焊接结束后仍有剩磁存在。
It will produce magnetic field due to affection by direct current welding power supply during the welding of spiral submerged arc welded pipe. It will still remain residual magnetic.
26. 此无线通信模块对焊接电源来说是透明的，所以焊接电源的应用层软件不需要做太大的修改。
Bluetooth module is transparent for welding source, so the application software of the welding source can be used only a little modification needed.
27. 详细分析了影响焊接电源正常工作的干扰来源，提出了在设计焊接电源时防止干扰源的措施。
The article particularly analyzes the interfere source affecting the operation of power source, and takes the measures that avoids the interfere source as designing the power source.
28. 讨论了应用DSC MC56 F 8523控制的焊接电源控制系统的硬件设计和软件设计。
The hardware design and the software design of welding power supply control system based on DSC MC56F8523 are discussed.
29. 空心阴极焊接设备由空心阴极焊枪、真空系统、焊接电源、气体流量控制单元、总控制箱组成。
This welding equipment consists of hollow cathode welding torch, vacuum system, welding power source, gas flow control unit and compact control device.
30. 空心阴极焊接设备由空心阴极焊枪、真空系统、焊接电源、气体流量控制单元、总控制箱组成。
This welding equipment consists of hollow cathode welding torch, vacuum system, welding power source, gas flow control unit and compact control device.
版权声明：问题易所有作品（图文、音视频）均来源网络，版权归原创作者所有，与本站立场无关，如不慎侵犯了你的权益，请联系我们告知，我们将做删除处理！