
词语导航
基本信息
词语:复合应力
繁体:復合應力
拼音:fù hé yīng lì
英语翻译
【化】 combined stress
相关词条
1.compoundstress 2.compositestress 3.combinedstress分词翻译
复的英语翻译:
again; answer; compound; duplicate; resume; turn over【医】 amb-; ambi-; ambo-; re-
合的英语翻译:
add up to; be equal to; close; combine; join; proper; shut; suit; whole【医】 con-; sym-; syn-
应力的英语翻译:
stress【化】 stress
【医】 stress
翻译例句
1. 应用第四强度理论,求解杆柱在扭矩和轴向力条件下的复合应力,设计抽油杆柱。
Rod strings are designed by computing compound stress with the fourth strength energy on the condition of torque and axial force.
2. 本文对M27和M24两种直径高强度螺栓进行了复合应力系数测定和预拉力损失试验。
The composite stress factor and pre-tensile force loss of the two diameter high strength bolts of M27 and M24 are experimentally determined in the paper.
3. 主梁下挠变形的主要原因是受热引起的最大复合应力超过许用值,达到了屈服极限值,强度不满足要求。
The main reason of the main beam down deflection was that the most complex stress exceeded the admissible value and achieved the yield limit value.
4. 主要采用一种具有复合应力场的挤出口模,通过固态挤出茂金属线性低密度聚乙烯获得双向自增强片材。
Biaxial self-reinforced metallocene linear low density polyethylene sheet was prepared by the die with complex stress field in solid state.
5. 将少量相对高分子量的高密度聚乙烯(HDPE)加入到相对低分子量的通用级HDPE中,在复合应力场作用下挤出制成管材。
A small amount of high molecular weight HDPE was added into relative low molecular weight HDPE under compound stress field to extrude pipe.
6. 计算结果表明,复合地基是否具有应力扩散的效应受很多因素影响,如加固层的几何性质、荷载分布的几何性质等。
It can be seen from the results that the properties of stress dispersion of composite ground are affected by many factors, such as geometrical properties of reinforced layer and load.
7. 同时晶须取向也影响复合材料的热压缩应力-应变曲线的形状。
Meanwhile, the whisker orientation affects the shapes of the stress strain curves of the composites.
8. 用有限元方法计算了铝热离心法制备不锈钢内衬复合钢管过程中的残余热应力分布。
The thermal stress distribution of the stainless steel lined composite steel pipe prepared by centrifugal-SHS process was calculated by the finite element method under thermoelastic assumption.
9. 还将上述方法与均匀界面层模型进行了比较,计算结果表明,界面层的性质对复合材料有效性质和局部应力的分布有着重要影响。
The computed results show that the presence of an interphase can have an important influence on the effective property and local stress distribution of the composites.
10. 按照剪切滞后理论和应变硬化规律,研究微复合材料的变形和应力状态。
The deformation and stress condition of the micro-composite are studied according to the shear-lag theory and strain-hardening law.
11. 采用有限元方法分析了颗粒增强铁基复合材料强度和应力与颗粒形状、尺寸以及体积分数的关系。
The finite element method is used to analyze the relationship between strength and stress of the particle reinforced iron matrix composites and the shapes, sizes and fraction volume of the particles.
12. 用这些计算方法,首次从实验上求得了空位与溶质原子复合体分别在低张应力状态和无应力状态下的扩散系数。
Using these approaches diffusion coefficients were obtained for the first time for complexes under tensile stress condition and no stress condition respectively.wwW.WENtiyi.CoM
13. 按照所建立的计算模型对含有圆形孔的复合材料板进行应力分析。
Stress of composite material plate with circular hole was analyzed by the model above.
14. 本文用三维弹塑性有限元法计算了含圆孔对称复合材料层板的层间应力分布。
In this paper, the interlaminar stress distributions of symmetric composite laminates with a hole are predicted by the three-dimensional elastoplastic finite element method.
15. 在不同的复合载荷下,薄壁钛管具有不同的应力状态。
Under different combination loads, the thin titanium tubes possess the different stress states.
16. 应用传统强度理论和细观力学方法对几种韧性材料在复合载荷条件下的断裂机理、启裂位置、开裂方向进行了实验分析和应力场计算。
In this paper, fracture mechanism, position and direction of crack initiation of mixed mode fracture in several ductile materials are tested, and stress distributions of which are analyzed.
17. 运用最小余能原理,求得了双层复合材料杆温度应力的封闭解。
By the use of the variational principle of complementary energy, the closed form of the stresses of double-layer composite bar is obtained.
18. 计算得到了材料的涂层处的应力状态以及它对复合材料整体热机械加载性能的影响。
The stress in the coating is obtained as well as it"s influence on the thermomechanical behavior of the material.
19. 高钒高速钢干滑动磨损机理为显微切削和疲劳磨损的复合,并且有应力作用下碳化物的碎裂及脱落。
The wear mechanism of high vanadium high-speed steel is combined micro-cutting and fatigue wear with carbide particle breaking and peeling off under stress.
20. 根据锚索和框架梁各自的特点,说明预应力锚索框架梁复合支护结构的边坡加固机制;
According to the characteristics of anchor and frame beam, the reinforcing mechanism of the support is discussed.
21. 本发明的目的是为解决已有金属基复合材料存在的热错配应力问题。
The purpose of the present invention is to solve the problem of misfit stress in metal base composites.
22. 本课题提出了一种新的预应力竹木复合材料制造方法,将竹束加捻形成的预应力应用于竹木复合单板层积材。
This topic proposed one new research technique of wood and bamboo composite, in which we apply the pre-stressed from twisted bamboo ties into wood and bamboo composite.
23. 复合材料压力容器的纤维缠绕预应力对容器的性能有很大的影响,合理设计这种纤维预应力可提高复合材料容器的综合性能。
The reasonably prestressing of carbon fiber wound on composite material vessel, which have great influence on vessel"s capability, can improve the integrated performance of composite material vessel.
24. 在弹性、横观各向同性条件下,计算得出了表征土壤-根系复合体应力-应变关系的本构方程。
The constitutive equations of the soil-root composite, which express the stress-strain relationship, were derived under the hypothesis of isotropy.
25. 针对纤维增强复合材料的属性特点,应用坐标系转换原理推导出通孔法测量复合材料残余应力时的应力释放系数公式。
The relieved coefficients during the measurement of the residual stresses in the fiber reinforced composites by the hole drilling method were given with conversion of the two coordinate systems.
26. 温度变化对复合材料板应力场的影响与温度变化幅值、加载方式和初始温度的大小有很大的关系。
The influence of temperature to the composite stress is very complex, it relates to initial temperature, temperature range and the way to give loads.
27. 搅拌桩地基沉降计算的准确性取决于搅拌桩复合地基中附加应力的分布,特别是下卧层应力的分布。
The accuracy of settlement calculation of composite foundation with mixing piles depends on the additional stress distribution in the foundation, especially in the subjacent bed.
28. 并使用这一方法测试了玻璃一铝复合材料的界面应力。
The interface stresses in the glass-aluminium composite have been measured by using this method.
29. 对短纤维增强金属基复合材料应力传递的传统剪滞理论进行了修正和改进。
The traditional shear lag theory of stress transfer in short fiber reinforced metal matrix composites was modified and improved.
30. 对短纤维增强金属基复合材料应力传递的传统剪滞理论进行了修正和改进。
The traditional shear lag theory of stress transfer in short fiber reinforced metal matrix composites was modified and improved.
版权声明:问题易所有作品(图文、音视频)均来源网络,版权归原创作者所有,与本站立场无关,如不慎侵犯了你的权益,请联系我们告知,我们将做删除处理!
