轴架用英语怎么说,轴架的英文翻译


词语导航

基本信息

词语:轴架

繁体:軸架

拼音:zhóu jià

英语翻译

【机】 pedestal

相关词条

1.pedestalbody  2.pedestal  3.plummerblock  

分词翻译

轴的英语翻译:

axes; axis; shaft; spindle
【医】 ax-; ax.; axes; axio-; axis; core

架的英语翻译:wWW.WENtiyi.COm

fight; frame; kidnap; put up; rack; support; withstand
【医】 snelf

翻译例句

1. 因此,船舶尾轴架结构的优化设计是一个很重要的问题。

Therefore, the optimizing of propeller shaft bracket is a very important issue.

2. 应用表明用有效模态质量进行模态识别,可以有助于找到尾轴架系统的固有频率和振型。

The practice application expresses that effective modal mass could be helpful to find natural frequency and vibration shape.

3. 从分析船舶尾轴架结构特点入手,介绍尾轴架工艺计算、工艺编制、产品生产过程及经验。

Starting from analyzing the structural properties of the Marine propeller shaft bracket, the authors introduce the technology calculation, design, process and their production experience.

4. 采用实验方法对某舰尾轴架进行动刚度测量,得到了前尾轴架和后尾轴架的横向动刚度曲线。

In the paper, the transverse dynamic stiffness curves of front shaft bracket and back shaft bracket of a ship were obtained by means of experiments.

5. 对船舶轴系进行冲击响应计算,通常在轴架支承处采用弹性边界处理,取一个近似的支承静刚度。

The support brackets are simulated by springs when calculating shock response of a ship shaft system, and the stiffness of spring usually takes an approximate value.

6. 车里的世界是这样的:你的可调节的坐位,方向盘轴,你的姿势与视线,茶杯架,车厢,收音机,钟表,你的电话和你的乘客。

There is the world inside: your adjustable seat and steering column, your posture and sightlines, all those cupholders and compartments, the radio, clock, your phone, your fellow passengers.

7. 对于单马达转向架,转向架上的两根轴由同一个马达驱动,常常会遇到扭转的共振,这将导致周期性的滑动。

Monomotor bogies, where both axles of the bogie are driven by a single motor, often encounter torsional resonances, which lead to periodic longitudinal slip.

8. 在传动轴启动和停转的过程中,软支承的摆架会有非常明显的振动,硬支承的摆架则没有这种现象。

During the start and stop of the drive shaft, the swing frame of the soft support will have a very obvious vibration.

9. 用于将板材固定在X和y轴位置上(支撑架中点与尾部止点上的线对齐)板材尾部顶住木头尾部止点。

Locates the tail of the board in the X and Y position (centre of the stringer aligns with the line on the tail stop). The tail of the board butts up with the wooden tail stop.

10. 梭架底部中心处的芯轴f是用来支持梭芯套和梭芯的。

The core axis F that shuttle wears bottom center to be in is to use supportive shuttle core to cover with shuttle core.

11. 介绍了4d轴焊接构架式转向架的研制目标、主要技术特点和参数、主要结构、有限元计算结果及试验情况。

Described are the development target, main technical features and parameters, main structure, finite element calculation results and testing of the 4d-axle welding frame type bogies.

12. 铁路货车提高速度和增大轴重的关键是转向架。

The key of acceleration and adding axle load of freight car is bogie.

13. 文中重点介绍了货车2G轴转向架的技术参数和结构的确定。

This paper mainly introduces the technic parameter and struture of railuay truck 2G axis redirector.

14. 对旋挖钻机桩架整体有限元分析中的关键件——销轴连接的有限元模型进行了深入研究,并提出了实用而精确的有限元模型。

The key in finite element analysis on complete pile frame of rotary pile drill-finite element model of pin connection, is researched in depth. A feasible and accurate finite element model is offered.

15. 介绍了2e轴中交叉支撑低动力作用货车转向架的主要技术参数、设计思想、设计结构及试验等情况。

The main technical parameters, design thought, design structure and testing of the higher cross braced low power freight car bogies with 2e axles are described.

16. 对电机采用轮对空心轴转向架悬挂的C0 - C0轴式机车的轴重转移进行了理论分析及计算。

Theoretical analysis and calculations are done to the axle weight transfer of C0-C0 locomotive with bogie-mounted and quill drived motor.

17. 尤其强调的是,需要按照下颌的铰链轴位置和参考位重新上合架。

Particularlya remounting of the models applied on the hinge axis and reference position ofthe lower jaw is indicated.

18. 方法采用自制单侧带轴可动跨关节外固定架治疗复杂肘关节骨折脱位12例,其中6例开放性损伤,4例合并神经损伤。

Methods 12 cases of complex elbow fracture dislocation were treated with unilateral hinged external fixator, 6 of which were open injured and 4 had nerve injuries.

19. 文章详细分析了单轴转向架的运行性能,并对单轴转向架在城轨车辆中的应用可行性进行了探讨,认为其可满足城轨车辆的运行要求。

In this paper, running performance of single-axle bogie is deeply analyzed, and the feasibility of using single-axle bogie in urban vehicles is discussed.

20. 当风机偏航时电制动器被提起,塔架轴上的偏航制动器部分提起,但被认定为完全被动方式。

The motor brakes are lifted when the turbine is yawing. The yaw brake on the tower axis will be lifted partially but has been assumed fully passive.

21. 根据一例客车燃轴事故调查情况,对客车滚动轴承保持架加工质量与燃轴关系进行分析和讨论。

In light of the investigation of a passenger car hot box accident, the relation between the machining quality of passenger car rolling bearing retainer and hot box is analysed and discussed.

22. 单轴转塔自动车床辅具。板牙架。尺寸。

Accessoties of single spindle turret automatic lathes . die holder . dimensions.

23. 根据本发明,通过一支架(4)将书写板(1)安装到扶手椅的扶手上,所述支架包含一中空轴(5)。

According to the invention, the table (1) is mounted to an armrest of the armchair by means of a support (4), said support containing a hollow shaft (5).

24. 在卷轴或卷筒的轴上所用的电装置。它用来在旋转的卷筒心子与固定的卷筒架之间提供电气连接。

The electrical device used on the axle of a spool or reel to provide electrical continuity between the rotating reel core and the stationary reel chassis.

25. 在卷轴或卷筒的轴上所用的电装置。它用来在旋转的卷筒心子与固定的卷筒架之间提供电气连接。

The electrical device used on the axle of a spool or reel to provide electrical continuity between the rotating reel core and the stationary reel chassis.

版权声明:问题易所有作品(图文、音视频)均来源网络,版权归原创作者所有,与本站立场无关,如不慎侵犯了你的权益,请联系我们告知,我们将做删除处理!