加工宽度用英语怎么说,加工宽度的英文翻译


词语导航

基本信息

词语:加工宽度

繁体:加工寬度

拼音:jiā gōng kuān dù

英语翻译

【化】 working width

分词翻译

加工的英语翻译:

machining; process
【化】 processing
【医】 elaborate; elaboration
【经】 extra work; process; processing; transform

宽度的英语翻译:

breadth; width
【医】 width

翻译例句

1. 平面滚光工具与立铣加工方式相同,横向移动加工,无加工宽度限制,工具须装夹在铣床上使用。

It goes the same with milling processing for plane surface. It is for horizontal movement processing without limitation on processing width.

2. 钢带:卷起来用于加工保持架的带型钢材。通过热轧或冷轧达到一定的厚度,然后切割成一定的宽度并卷成钢带卷。

STRIP: Flat rolled steel used in the forming of cages. Hot or cold rolled to specified thickness, slit to specified widths and wrapped into coils.

3. 研究了激光光斑直径及离焦量、切割速度、激光功率等工艺参数对齿轮切缝宽度及加工质量的影响。

The effects on kerf width and quality made by laser facula diameter, focal point position, cutting speed, laser power and other technological parameters were studied.

4. 分析了脉冲宽度、脉冲间隔、峰值电流、加工时间对强化层厚度的影响,并对强化层的显微硬度和耐磨性进行了分析。

The effects of pulse width, pulse interval, peak current and process time on intensified layer are analyzed. And the micro-hardness and the property of strengthening layer are also analyzed.

5. 图1挤压整体加筋板可加工成各种形状、厚度和宽度以满足客户的需求。

Fig. 1. Extruded ISPs can be made in a variety of shapes, thicknesses, and widths to meet customer requirements.

6. 内容涉及基本原理、实验装置及加工参数对弧柱特性、切口宽度、切口角、无渣切速的影响规律。

The basic principle, test device, and the regularity of cutting parameters affecting to the arc characteristics, kerf width, kerf Angle, and dross free cutting speeds are dealt with.

7. 在最后的实例中,验证了这种方法能明显地增大加工带宽度。

This method can increase the cutting width evidently, which is validated with example.

8. 针对高速研磨加工中使用的弯曲成型法非球面磨具的变形特点,分析了磨具在弯矩作用下产生的弯曲变形,指出磨具高度对磨具成形误差影响较大,磨具宽度对其影响较小。

The bending deformation of the aspherical bending lapping tool under the action of bending moment was analyzed according to its deformation feature in high speed lapping process.

9. 介绍了工件退刀槽宽度小于机床退刀行程的内凹齿轮的齿形加工方法,解决了传统加工方法不易实现的难题之一。

Tooth profile machining of mid-concave gear with narrow run-out groove is introduced, which solves a difficult problem using traditional machining.

10. 具备该技术的压力机,可以实现对大宽度板材的加工,减少生产工序,降低生产成本。

Press with this technology could realize manufacturing sheet with large width, reducing production procedures and lowering manufacturing cost.

11. 本文通过对电火花线切割加工工艺规律的分析,选取影响工艺效果的主要因素:工件厚度、脉冲宽度、脉冲间隔、脉冲高度,作为输入向量。

By analyzing the law of WEDM processing, this article selects the main factors affecting process: the thickness of the work-piece, pulse width, pulse interval, pulse height, as the input vectors.

12. 在加工过程中,加工表面精度自然受到加工参数的影响,其中包括放电电流能量、电流脉冲宽度等的影响。

In process, the surface accuracy is affected by motion parameters such as discharging current capacity and current impulse width.

13. 经刨削加工成一定厚度和宽度的竹片,按照胶合板的构成原理制成强度高、刚性好的结构用竹材胶合板。

According to the constituting principle of plywood, the structural bamboo plywood with high strength and stiffness is made.

14. 结果表明:采用纳秒级脉冲电源能显著提高电解加工的定域性,优化纳秒级脉冲电源脉冲宽度和加工电压可进一步提高加工定域性。

The pulse duration and voltage have obviously affected the localization in ECM using nanosecond pulse power. With a rise in pulse duration and voltage, the localization gradually reduced.WWw.weNTIyi.com

15. 结果表明,减小脉冲宽度,降低加工电压,可以提高微细电解加工的精度。

The experimental results show that decreasing pulse duration and voltage can enhance the localization and improve electrochemical micro-machining accuracy.

16. 开挖尺寸不足:电缆沟底部的开挖宽度,应根据施工需要增加工作面宽度。

The excavation size is not enough: Cable trench bottom width should be increased as per construction needs.

17. 主要用于将大幅面的无纺布切成多个不同宽度的小盘无纺布供加工无纺布制品使用。

This machine is mainly used to slit large-width nonwoven fabrics into small nonwoven rolls of various breadths for making nonwoven products.

18. 在ITO膜上加工出了微米宽度的直线。

Moreover, lines with micro-width are also fabricated on ITO film.

19. 在ITO膜上加工出了微米宽度的直线。

Moreover, lines with micro-width are also fabricated on ITO film.

版权声明:问题易所有作品(图文、音视频)均来源网络,版权归原创作者所有,与本站立场无关,如不慎侵犯了你的权益,请联系我们告知,我们将做删除处理!