
词语导航
基本信息
词语:光整
繁体:光整
拼音:guāng zhěng
英语翻译
【机】 fitting
分词翻译
光的英语翻译:
light; ray; honour; merely; naked; scenery; smooth
【化】 light
【医】 light; phot-; photo-
整的英语翻译:
complete; full; whole
【经】 flat
翻译例句
1. 滚压是大深缸孔光整加工方法之一。
Rolling is one of the methods for finishing big diameter deep cylinder-hole.
2. 阐述了脉冲电化学光整加工原理。
The principle of pulse electrochemical finish machining (PECFM) is discussed.
3. 将光整热镀锌板磷化技术用于空调器的生产。
Phosphating of hot dip galvanized sheets have been used for the production of air conditioners.
4. 采用成型阴极对冷轧丝杠轧辊进行脉冲电化学光整加工。
Pulse Electrochemical Finishing with a Shaped Cathode and Its Application on Roller;
5. 结果对照组大鼠胃粘膜光整完好,肉眼未见糜烂及溃疡。
RESULTS The gastric mucosal tissue of control group kept intact and no corrosive focus or ulcer was observed.
6. 具备结构简单,操作方便等特点,可代替磨削进行光整加工。
This device is an simple machine and easy to operate, which can replace grinding.
7. 液体磁性磨具光整加工技术是一种新型的精密表面光整加工技术。
Liquid-magnetic abrasive tool finishing is a kind of new technology on precise surface finishing.
8. 影响磁性磨粒光整加工技术的因素主要来自两个方面:设备和磨粒。
The factors that influencing processing results mainly comes into two points: the equipment and the abrasive.
9. 滚压力分级施压,滚压分为定位滚压、强化滚压、光整滚压三过程;
The rolling pressure is exerted gradationally whereas the rolling process is divided into three steps, namely, rolling orientation, rolling reinforcement and rolling smoothing;
10. 高频脉冲电流加工及光整加工技术能提高零件的加工精度和表面质量。
High frequency pulse current machining and fine finishing can improve parts" machining accuracy and surface quality.
11. 胆系结石14例,见胆管或胆囊内光整的隆起性改变,临近管壁光整;
In 14 cases with bile duct stone, there were regular and smooth prominences with normal biliary wall.
12. 单纯囊肿的X线表现为圆形或椭圆形致密阴影,边缘光整,密度均匀;
The pure cyst"s X performance is the circular or the ellipse compact shadow, the edge light entire, the density is even;
13. 多年来一直致力于光整设备,环保设备,清洗设备的研究开发设计工作。
Over the years has been committed to light the whole equipment, environmental equipment, cleaning equipment research and development of the design work.
14. 磨料水射流复合电解光整加工是在磨料水射流作用的基础上复合电解加工。
The process of abrasive water jet (AWJ) compound with electrolytic machine is based on AWJ.
15. 光整后不破坏零件的原有形状和尺寸的精度,提高原零件粗糙度1-2级。
The original shape &size accuracy is not spoiled after polishing, improving its fineness1-2 grade.
16. 在分析研究脉冲电化学光整加工原理的基础之上,结合实际进行了实验设计。
Based on analyzing the mechanism of pulse electrochemical finish machining, a practical experiment is designed.
17. 该系统的研制成功,为实现模具复杂形面的自动高精度光整加工提供了条件。
The developing success of this machining and control system provides with a new machining equipment for the realization of automatic grinding and polishing of a complex mould and die surface.
18. 实验结果表明,用液体磁性磨具对零件表面进行光整加工可以达到满意的效果。
Using liquid-magnetic abrasive tool finishing workpiece, the quality of surface can obtain satisfied effect.
19. 通过界面双电层电容值的变化来解释脉冲电化学光整加工提高精度的根本原因;
The reason for the improvement of precision by the EP is the change of double layer capacity value.wWW.WEntIyi.COm
20. 旋转阴极展成电解加工主要用于型面的光整加工,其最终加工间隙决定了型面精度。
The ECCEM (Electrochemical Contour Evolution Machining) is mainly used for finishing surface, the final gap determines the final surface precision.
21. 液体磁性磨具光整加工法是利用液体磁性磨具的磁流变特性开发的表面光整加工方法。
The liquid-magnetic abrasive tool finishing technology is the surface finishing technology which utilizes the magnetic rheological property of the liquid-magnetic abrasive tool.
22. 采用四轴联动数控铣床及自行设计的指状铣刀和数控程序,对膨胀机叶轮进行光整加工。
Four shafts linkage NC milling machine is used for polishing impeller of an expending machine, which finger - like milling cutter and NC system is designed.
23. 液体磁性磨具光整加工技术是用磨具本身的流变特性对工件表面进行光整加工的新技术。
This liquid magnetic grinding apparatus polishing technology is a new polishing technology applying the rheologic property of grinding apparatus.
24. 磁性研磨是一种利用磁场中的磁性磨料对具有相对运动的工件表面进行光整加工的新技术。
The magnetic abrasive finishing is a new technology used to process the surface of work piece by the relative motion with magnetic abrasive in the magnetic field.
25. 由于目前的加工方法主要是机械光整加工,存在着加工质量差、生产率低、成本高的问题。
Mechanical Finish Machining has the question of low productivity and high cost. Therefore, it can"t satisfy the practical production.
26. 光整加工作为模具加工的最后一道工序,其加工质量一般影响着产品的最终质量和使用性能。
Finishing machining as the last procedure of mould machining usually is the most important working procedure, its finishing quality affects directly the final quality and using performance of product.
27. 对脉冲电化学光整加工(PEFM )中所采用的一种电解液的伏安特性进行了实验研究。
The volt ampere properties of electrolyte in pulse electrochemical finish machining (PEFM) are investigated in this paper.
28. 本文对曲面数字化仿形磁粒光整加工系统的原理、功能和软、硬件等一些关键技术进行了论述。
The principle, functions and design about the machine tool and control system were described in this paper.
29. 针对齿轮的脉冲电化学光整加工的实际特点 ,设计了一套基于上下位机结构的微机控制系统。
This paper designs a microcomputer control system based of upper and lower structure for pulse electrochemical polishing gear process.
30. 针对齿轮的脉冲电化学光整加工的实际特点 ,设计了一套基于上下位机结构的微机控制系统。
This paper designs a microcomputer control system based of upper and lower structure for pulse electrochemical polishing gear process.
版权声明:问题易所有作品(图文、音视频)均来源网络,版权归原创作者所有,与本站立场无关,如不慎侵犯了你的权益,请联系我们告知,我们将做删除处理!
