
词语导航
基本信息
词语:焊接温度场
繁体:焊接溫度場
拼音:hàn jiē wēn dù cháng
英语翻译
【化】 welding temperature field
分词翻译
焊接的英语翻译:
seal; solder; weld
【医】 solder; soldering
温度场的英语翻译:
【化】 temperature field
翻译例句
1. 设计了用比色法实时检测焊接温度场的传感器与计算机处理系统。
A sensor and computer system was designed for the welding temperature field real time measurement by colorimetric method.
2. 获得了焊接温度场和应力场的动态变化过程,并分析了计算结果。
Temperature distribution and stress variation of welding are achieved and the results are discussed properly.
3. 建立了一种基于试验的非线性曲线拟合的新方法来分析焊接温度场。
Welding temperature field was analyzed by using non-linear curve fit method based on experiments.
4. 外加纵向磁场可以改变电弧加热有效半径进而影响焊接温度场分布。wWW.wEnTIYI.Com
Welding temperature distribution was effected by the effective heated radius of the arc regulated by different external longitudinal magnetic intensity.
5. 高度不均匀的焊接温度场,导致构件中产生较大的残余应力与变形。
The highly non-uniform welding temperature file caused large residual stress and deformation in the welding plate.
6. 表明本计算方法能够准确计算焊接温度场,是一种实用的工程计算方法。
By comparing the data of computation and experiment, it shows that this is a practical method which could be used for predicting welding temperature distribution.
7. 焊接温度场数值模拟可以比较准确预测并反映整体焊接温度场实际分布。
Welding temperature field numerical simulation method was able to forecast and reflect the real distribution of whole welding temperature field accurately.
8. 获得了非封闭环焊缝焊接温度场和残余应力场,并对模拟结果进行了分析。
The temperature field and residual stress field of unclosed hoop weld were obtained and the results were discussed.
9. 研制了一种新颖的单镜头双波长红外图像比色测温系统来实时检测焊接温度场。
A new infrared temperature measure system based on the calorimetric method has been developed to survey the welding temperature field in real time.
10. 得到了三维单层焊和两层焊焊接温度场和残余应力场,并对计算结果进行分析。
The temperature field and residual stress field of 3d single-layer welding and multi-layer welding were obtained, and the calculation results were discussed.
11. 提出一种依次判断焊接温度场各影响因素大小的方法,以便精确模拟焊接温度场。
A method to estimates the role of the interrelated factors that have influence on the precision of simulation in temperature field is study.
12. 结果表明:电流和电压对焊接温度场的影响最大,板材厚度其次,板材长度最小。
The results show that the current and voltage are the strongest factors, the thickness is stronger, and the last one is the length of the plate.
13. 焊接温度场以其为焊接过程最直接的外在表征而成为焊接过程研究的一种常用的研究手段。
Study on temperature field is a common method to study welding process because it is one of direct token of welding process.
14. 本文对某类型飞轮的焊接温度场进行了数值模拟,并将计算结果与试验测试数据进行对比和分析。
In this paper, a temperature field of a flywheel is simulated and analyzed. And then, calculated results are compared with experimental data.
15. 建立高斯热源模型,并通过APDL语言编写程序实现热源的移动加载,对焊接温度场进行动态模拟。
In order to realize the dynamic simulation of temperature filed, gauss heat source model was adopted, and APDL language was used to compile program to apply moving heat source load.
16. 为了验证薄板焊接温度场数值模拟的正确性,应用虚拟仪器技术设计了一套焊接热循环动态检测系统。
The software for welding heat cycle was developed successfully, based on some classical mathematic models and measured data and programmed appropriately by LabVIEW7.
17. 所研制的CCD图像传感器系统,通过采用比色测温的方法,实现了对焊接温度场图像的实时采集与处理。
In the developed CCD image sensor system, real-time collecting and disposing the welding temperature field image is realized by means of using the method of colorimetric temperature measure.
18. 根据不均匀的焊接温度场和施焊时焊接构件的刚性条件,可以认为焊接残余变形和残余应力是不可避免的。
According to the asymmetry welding temperature fields and the rigidity of component when welding, we could think it is inevitable that welding would bring remains-strain and remains-stress.
19. 该方法利用视觉传感来对焊缝背面焊接温度场热图像进行实时检测及处理,从而达到控制焊缝熔透的目的。
The method adopts visual sensor monitoring and captures images of field of welding temperature of back of weld.
20. 在总结前人经验的基础上,通过平板堆焊实例利用直接法同时计算焊接温度场和应力场,模拟出了焊接过程。
Based on summing up others" experience, this paper research the direct method to calculate and simulate the temperature and stress field at the same time through a board surfacing welding sample.
21. 本文给出了各自的焊接温度场演变历程和各焊缝及其附近热循环曲线,并定量分析了其焊接温度场分布规律。
In this paper, their temperature evolutions and thermal cycles nearby welding beads were given, and the temperature field distributions were quantificationally analyzed.
22. 在模型中运用移动的三维双椭球体热源作为输入热源来模拟焊接过程,最终获得了焊接温度场和残余应力场。
The temperature field and residual stress field were obtained by using 3-D double-ellipsoidal heat source model to simulate welded process.
23. 针对具体算例,采用3种不同的热源加载模式进行三维焊接温度场的数值计算,并比较不同方法计算焊接温度场结果的差异。
Numerical computation of 3d welding temperature field distribution is carried out using different heat source models. The differences of the computation results are compared.
24. 以变形镁合金az31 B为研究对象,采用红外热像仪拍摄镁合金激光- TIG复合热源焊接过程中的焊接温度场,提出一种基于红外辐射测温原理。
The infrared thermal imaging system was used as a sensor to measure the temperature field of wrought magnesium alloy AZ31B during the laser-TIG hybrid welding process.
25. 同时介绍了控制焊接变形的几种方法,如反变形法、控制工艺参数、控制温度场以及系统综合分析等。
Some methods used in the control of welding deformation, such as reverse deformation, system analysis, controlling process parameters and temperature field, are introduced.
26. 构造了三维管接头焊接应力和局部热处理温度场。
The three dimensional welding residual stress and temperature fields in local PWHT are constructed.
27. 进行了不锈钢焊接凝固裂纹温度场分析与数值模拟。
In this paper, the temperature field of weld metal solidification cracking in the stainless steel was analyzed and simulated.
28. 焊件中的温度场分布反映了复杂的焊接热过程,是研究焊接变形、焊后残余应力等状况的基础。
Temperature field distribution of weldment, which reflects complex welding heat process, is a basic on studying welding deformation, residual stress and so on.
29. 通过钨极氩弧焊试验,对焊接热影响区温度场进行分析和研究,建立了焊接热循环曲线。
The temperature field in welding HAZ was studied and analyzed. Welding heat curve was set up by argon-shielded tungsten arc welding experiment.
30. 通过钨极氩弧焊试验,对焊接热影响区温度场进行分析和研究,建立了焊接热循环曲线。
The temperature field in welding HAZ was studied and analyzed. Welding heat curve was set up by argon-shielded tungsten arc welding experiment.
版权声明:问题易所有作品(图文、音视频)均来源网络,版权归原创作者所有,与本站立场无关,如不慎侵犯了你的权益,请联系我们告知,我们将做删除处理!
