催化剂粉末用英语怎么说,催化剂粉末的英文翻译


词语导航

基本信息

词语:催化剂粉末

繁体:催化劑粉末

拼音:cuī huà jì fěn mò

英语翻译

【化】 catalyst fines

分词翻译

催化剂的英语翻译:

activator; catalyzer
【计】 catalyst
【化】 catalyst; catalyzator; catalyzer
【医】 accelerant; catalyst; catalytic agent; catalyzator; catalyzer
contact substance

粉末的英语翻译:

dust; farina; powder

翻译例句

1. 重油催化裂化油浆中含有催化剂粉末,需加以分离。

The slurry oil withdrawn from heavy oil catalytic cracking contains catalyst fines which should be separated.

2. 采用化学清洗和空气爆破相结合的方法,清除换热器中由变换气及催化剂粉末等形成的垢物,降低换热器的阻力,提高热效。

Combining the chemical cleaning and air blasting method, this paper introduces a new method of removing the deposit resulting from the shift gas and catalyst powder, etc.

3. 利用自行研制的片状粉末冶金铁基金刚石催化剂在六面顶压机上进行了金刚石合成试验。

The synthetic diamond tests were carried out using a six-anvil high-pressure apparatus and a new sheeted iron-base catalyst made by power metallurgy.

4. 然而,传统粉末光催化剂在应用中存在许多缺点,如反应过程中必须搅拌,反应后催化剂难于分离和回收等。

However, there exist many defects in the use of conventional powder photocatalysts, such as stirring during the process, segregating after the reaction and so on.

5. 蜂窝状筛网催化剂的高开孔结构,使其较粉末催化剂具有较低的压力降,较蜂窝状堇青石催化剂具有较高的传质系数。

Wire mesh honeycomb combines a low pressure drop compared with powder catalyst and high mass transfer compared with ceramic honeycomb, mainly attributed to the high porosity of wire mesh structure.

6. 本文采用粉末模压法制备金属镍催化剂,并研究了催化剂的制备条件及其影响因素。

In this paper, a monolithic nickel catalyst was prepared by the powder moulding, and the preparation conditions and influence factors were studied.

7. 以WO 3粉末为催化剂,研究了在水溶液中次甲基蓝染料的光催化降解。

Photocatalytic degradation of methylene blue dye in aqueous solution with WO3 dispersion has been investigated.

8. 本实用新型的挤条机体积小、重量轻,适用于催化剂、干燥剂、吸附剂、食品等粉末状或糊状物料的挤压成型。WwW.weNTiyi.cOM

The utility model has the advantages of small size, light weight and is suitable for the extrusion molding of the stuff with powder form or pasty form of catalyst, desiccant, adsorbent, foods, etc.

9. 本实用新型的挤条机体积小、重量轻,适用于催化剂、干燥剂、吸附剂、食品等粉末状或糊状物料的挤压成型。

The utility model has the advantages of small size, light weight and is suitable for the extrusion molding of the stuff with powder form or pasty form of catalyst, desiccant, adsorbent, foods, etc.

版权声明:问题易所有作品(图文、音视频)均来源网络,版权归原创作者所有,与本站立场无关,如不慎侵犯了你的权益,请联系我们告知,我们将做删除处理!