
词语导航
基本信息
词语:二次加热
繁体:二次加熱
拼音:èr cì jiā rè
英语翻译
【化】 double heating
分词翻译
二的英语翻译:
twin; two
【计】 binary-coded decimal; binary-coded decimal character code
binary-to-decimal conversion; binary-to-hexadecimal conversion
【医】 bi-; bis-; di-; duo-
次的英语翻译:
order; second; second-rate
【医】 deutero-; deuto-; hyp-; hypo-; meta-; sub-
加热的英语翻译:
cook; heat; heating
【化】 heating
【医】 firing; heating
翻译例句
1. 二次加热使合金组织中产生部分液相,在650?。
Reheat makes liquid phases emerge in the alloy, when the warming temperature is 650?
2. 本实用新型的烟道中可以设置一组与双层水套相通的横置二次加热管。
A group of horizontal secondary heating pipes communicating with the double-layer water jacket can be arranged in the flue of the hot-water boiler.
3. 以A356合金为对象,采用中频电磁感应器进行了二次加热工艺的研究。
The reheating process for A356 aluminum alloy was conducted with main frequency induction furnace.
4. 目前尚无法可靠地定量检测坯料过软化的问题,单靠大量试验难以改进二次加热系统。
Because there are no reliable methods to measure quantitatively over softening of billet, it is difficult to improve reheating system only by great deal of experiments.
5. 研究了近液相线半连续铸造ZL201合金的微观组织及其在二次加热过程中的变化。
The casting and remelted microstructures of ZL201 alloy cast by liquidus semi-continuous casting(LSC)were studied.
6. 当加热温度和保温时间一定时,随着挤压次数的增加,二次加热组织的晶粒尺寸减小。
When remelted temperature and holding time are constant, with the increment of number times of extrusion the crystal grain becomes small.
7. 本文介绍了利用加热炉烟气余热对重油实现二次加热以改善燃烧状况的方案,装置和效果。
This paper introduces the plan, equipment and effects of utilizing waste heat of flue gases of reheating furnace for second heating of heavy oil to improve the combustion conditions.
8. 研究结果表明,适当的感应加热工艺能满足金属半固态成形技术中的二次加热的技术要求。
Result of research shows that proper technology of induction heating satisfies the technologic request in semi-solid metal forming.
9. 对Y112铝合金进行半固态触变模锻实验,确定了该试验最优的半固态二次加热工艺参数。
Y112 aluminum alloy thixo-forging experiment in semi-solid state was carried out. The optimized reheating process parameters were determined in the experiment.
10. 不幸的是,这个浴缸不是一个具有二次加热系统和循环射流的温泉式浴缸,而是一个简单的水容器。
Unfortunately, the bathtub is not a spa-style tub with a secondary heating system and circulating jets, but rather a simple water containment vessel.
11. 采用感应加热研究X 70控轧钢弯管二次加热力学组织、力学性能随着淬火温度、回火时间的变化规律。
Using the method of induction heating, the regulation of the variety of X70 controlled rolling steel bends"mechanics structure and mechanics property in secondary heating is investigated.
12. 利用电阻炉加热,采用电子显微镜及图象分析仪,研究了近液相线铸造a 356铝合金在二次加热过程中的组织变化。
Using resistance furnace, the structure of A356 aluminum alloy casted by nearby liquidus semi-continuous was studied during remelting by means of electron microscope and image analysis apparatus.
13. 对含有内部裂纹的45钢试样采取了不同温度一次加热正火处理和二次加热正火处理,研究了其内部裂纹愈合的可能性。
The possibility of inner microcrack healing was studied by normalizing the 45 steel samples containing inner crack for one time and two times respectively.
14. 介绍了镁合金半固态触变成形技术中的三个关键技术:非枝晶组织半固态浆料的制备、坯料的二次加热、半固态触变压铸成形。
This paper introduced the key technology of SSP(semi-soild process) thixomolding of magnesium alloys : the preparation of non-dendritic structure, reheating, thixomolding.
15. 结果表明: 等径道角挤压后二次加热等温处理是一种适于AZ91D镁合金的制坯方法, 加热温度对坯料的组织有很大影响。
The results show that reheating the AZ91D magnesium alloy extruded by an equal channel die is a kind of good method of preparing AZ91D magnesium alloy billets.
16. 对半固态坯料二次感应加热技术进行了较为系统的介绍和分析。
An overview of the induction reheating technique for SSM billet is introduced and analyzed systematically.
17. 本文介绍了锡兴钢铁公司,为完善链式炉排加热炉所做的二次改造和实现自动烧钢的做法及效果。
This paper introduces two transformations for perfecting chain grate reheating furnace and the effects of automatically firing steel.
18. 采用如低起燃温度催化剂、密耦催化剂、HC捕集器、二次空气注入和电加热催化剂等在内的排气后处理技术,可以有效地减少污染物尤其是HC的排放。
It may effectively reduce the HC emissions to use a catalyst with low light-off temperature, close-coupled catalyst, HC traps, second air injection and electrically heated catalyst.
19. 箱体加热油炉油温达到工艺温度3小时之后,开始二次紧固喷丝板(热紧)。
Tight spinneret again after die heating oven reached technics temp. 3 hours .
20. 最后讨论了二次谐波加热和少数成份离子加热的实例。
Some examples are discussed for second harmonic heating as well as the minority heating.
21. 力学性能测试结果表明,除在临界二相区加热外,二次热循环均使粗晶区得到初化。
The results show that toughness of the coarse grained HAZ is improved after second welding heat cycle except intercritical two-phase heating.
22. 减少土地使用50%左右,采用太阳能集热装置为发酵器加热,避免了二次能源消耗。www.WEnTiyI.COm
It reduces the land use by about 50%. The adoption of heating of the fermentor by solar thermal collecting device helps avoid the second energy consumption.
23. 装置主要结构包括:二室堆肥发酵仓、保温层、通风供氧系统、空气加热系统以及二次污染控制系统。
The main components of the bioreactor were:a two-room fermentation case, a thermal insulation layer, an air supplying system, an air heating system, and a secondary pollution prevention system.
24. 发现,HQ70钢过热区粗大非平衡组织,经第二次快速加热到正火区,并没有出现通常所认为的“细化品粒”现象,而是出现了“组织遗传”。
It was discovered that structural heredity phenomenon took place in the non-equilibrium structure of overheated zone of HQ70 steel after another quick heating.
25. 楦头撑台第二次上升压着设计配合扫刀加热装置,增进结帮效果使成品平坦不发角,提高鞋子品质。
XuanTou hold a second rise pressure design with the sword, and increase the heating device and side effect finished flat not hair Angle, improve quality shoes.
26. 楦头撑台第二次上升压著设计配合扫刀加热装置、增进结帮效果,使用成品平坦不发角、提高鞋子品质。
The second time and pressing of the last supporter works with the wiper heating device to increase the lasting effect. SmoothThe lasting areas and upgrade the quality of the shoes.
27. 第一次是用两面加热做的,第二次是用一面加热做的,感觉后者比较厚实起层,口感更好些!
I used the double-side heating for the first time and one side for the second time. Personally I like the latter... which tasted thicker!
28. 第一次是用两面加热做的,第二次是用一面加热做的,感觉后者比较厚实起层,口感更好些!
I used the double-side heating for the first time and one side for the second time. Personally I like the latter... which tasted thicker!
版权声明:问题易所有作品(图文、音视频)均来源网络,版权归原创作者所有,与本站立场无关,如不慎侵犯了你的权益,请联系我们告知,我们将做删除处理!
