
词语导航
基本信息
词语:抽模
繁体:抽模
拼音:chōu mó
英语翻译
【机】 drawing die
分词翻译
抽的英语翻译:
take out
【经】 lay on
模的英语翻译:
model; module; mould; pattern
【计】 M; MOD; modulo
【化】 mould
【医】 die; mol; mole
翻译例句
1. 运用可靠性设计原理, 对塑料注射模常用的斜导柱式抽芯机构进行分析。
By using the principle of reliability design, the withdrwal core mechanism with bevel lead column in plastic injection mould is analyzed.
2. 对双层共12个不同方向同步抽芯脱模典型结构以及模具制造和试模时应注意的问题作了叙述。www.weNtIYI.COm
The structure of 12 of the double core-pulling in different directions, the points which should pay attention to when making and trying were described.
3. 本文对灭火器筒座的注塑模的设计结构进行了叙述,其侧向抽芯机构具有简易、可靠等特点。
The structure of injection mould for cylinder holder of fire extinguisher is introduced. The lateral core puller is simple and reliable.
4. 针对把手注射模的新设计,阐述了把手注射模的结构形式,并重点分析了模具斜顶抽芯机构的设计。
Aiming at the new design of handle injection mould, the author expatiated the structural form of handle injection mould and analyzed the design of mould slanting tip core machine.
5. 详细介绍了剃须刀头架注射模设计过程,重点介绍了滑块抽芯机构设计特点。
The design steps of injection mold for the shaver frame were introduced in detail, mainly introduced the slide core-pulling mechanism.
6. 采用带抽芯机构的组合压型,制作出了行星轮架整体蜡模。
The inner core pulling of The gear planetary frame can be solved by adopting combinative core.
7. 介绍了外壳类塑件注射模设计生产中,行程较短抽芯的几种简单灵巧的抽芯机构。
Several small and flexible withdrawal core mechanisms for the injection mould are introduced in detailed in this paper.
8. 介绍大屏幕彩色电视机前壳注射模结构,重点介绍侧抽芯大滑块的设计, 顶出机构和进浇方法的改进。
The injection mold structure of the front shell of large screen color TV is introduced, and design of side core-pulling large slide, improvement of ejector mechanism and gating method are introduced.
9. 介绍了摆动块内抽芯机构,并设计了摆动块内抽芯注射模。
The core-pulling mechanism with swing block was introduced, and an injection mold with swing block was designed.
10. 空心型芯与固定在动模上的液压抽芯器相连。
Hollow core was linked with hydraulic loose-core implement fixed on the moving die.
11. 介绍三面内抽芯盒盖注射模的模具结构及工作原理,并指出了该模具的设计要点。
It introduces the mould structure and working principle of the injection mould with inside pattern drawing from three directions for core. Point out the design gists of the mould.
12. 介绍了外壳注射模结构,阐述了流道系统、抽芯结构以及滑块的确定方法。
The injection mold structure of outer shell is introduced, whilst, flow system and the deciding method of pulling-core structure and slider are stated respectively.
13. 介绍了塑料管套注射模的环形型芯抽芯机构。
A kind of ringed core pulling mechanism of injection die of plastic casing coupling is introduced.
14. 掌握长抽距或斜抽芯塑件的结构工艺分析及抽芯距、抽芯力的计算,齿轮、齿条注射模侧向抽芯机构的原理和齿轮、齿条设计要点尤其关键。
At the same time, introduce the principle of side core-pulling mechanism of gear and rack injection mold, and design gist of a rack.
15. 采用该方法设计的吸塑模结构紧凑,抽芯可靠,生产效率高。
T he plastics suction mould by this design is impact in structure and reliable in core pulling, and has high production efficiency.
16. 根据铸件形状特点,若在动模内取出铸件,需长距离抽芯,故设计了滑块中途自行转动机构。
If the casting is taken out from the moving die, long distance core pulling is needed according to the shape of the casting, so the mechanism of the sliding block which rotates midway was designed.
17. 针对把手注射模的新设计,阐述了把手注射模的结构形式,并重点分析了模具斜顶抽芯机构的设计。
A new type of practical mould structure with tightwire and idler wheel for Angle core pulling of die injecting a Angle bracket is presented.
18. 滑块要用液压油缸抽芯以保证开合模顺序。
The slide pins will use an oil cylinder to assure that the process is in proper order.
19. 对塑料件侧向抽芯的特点进行总结。正确选择侧向抽芯方法是注射模设计的关键。
The side core - pulling constituted a key factor in the design of injection molds.
20. 介绍了一种新型抽真空平板硫化机的结构特点。此机器能实现模具的自动推出、开模、翻转、顶出。
The construction here refers to a new kind of air pumping press, realizing the automatic draw, turn over, push out and removal of the mould.
21. 是一副比拟典型的塑料模具,它不只包罗有镶拼的型腔、侧向抽芯构造、动定模都有成型的型芯,还有延时抽芯机构。
Is a typical plastic mold, which not only include Xiangpin the cavity, lateral core pulling structure, the dynamic model has forming the core, delay core pulling bodies.
22. 清洁、大抽速真空系统是现代空间环模设备中必不可少的组成部分之一。
Vacuum system of oil free and high speed is an integrated component of a modern large simulator.
23. 本液压铸造机由机座、开合模总成、下抽芯总成、液压控制柜和电器控制柜组成。
The hydraulic casting machine is composed of a machine base, a mould opening and closing assembly, a lower loose core assembly, a hydraulic control cabinet and an electric appliance control cabinet.
24. 本液压铸造机由机座、开合模总成、下抽芯总成、液压控制柜和电器控制柜组成。
The hydraulic casting machine is composed of a machine base, a mould opening and closing assembly, a lower loose core assembly, a hydraulic control cabinet and an electric appliance control cabinet.
版权声明:问题易所有作品(图文、音视频)均来源网络,版权归原创作者所有,与本站立场无关,如不慎侵犯了你的权益,请联系我们告知,我们将做删除处理!
