流动焊接用英语怎么说,流动焊接的英文翻译


词语导航

基本信息

词语:流动焊接

繁体:流動焊接

拼音:liú dòng hàn jiē

英语翻译

【电】 flow soldering

分词翻译

流动的英语翻译:

flow; flowage; fluxion; on the move; run; stream
【医】 afflux; flow; fluxion; streaming movement
【经】 circulating; floating; flowWWw.weNTIYI.cOM

焊接的英语翻译:

seal; solder; weld
【医】 solder; soldering

翻译例句

1. 在役焊接过程中,管内流动介质的快速冷却,易使接头出现氢致裂纹。

Because of the fast cooling of flowing medium, the hydrogen cracking occurs easily under in-service welding.

2. 从压入量、倾角、搅拌工具的外形、焊接速度、旋转速度和材料所处位置等方面研究了工艺参数对金属塑性流动的影响。

The influences of plunge depth, push angle, profile of tool, rotation speed and welding speed on metal flowing were studied.

3. 施加的压力电极提示,通过目前的流动,拥有部分焊在亲密接触之前,期间和之后的焊接电流的时间周期。

The pressure exerted by the electrode tips, through which the current flows, holds the parts to be welded in intimate contact before, during, and after the welding current time cycle.

4. 文中概括了近年来焊接熔池传热与流体流动模拟所取得的一些进展,总结了影响熔池传热和流体流动的一些主要因素。

In this paper, some progress attained in recent years on heat transfer and fluid flow in weld pool was summarized, then generalized the factors that influenced heat transfer and fluid flow greatly.

5. 焊接过程中搅拌焊针的结构形状是影响焊缝区塑性软化材料流动方式的主要因素,从而影响焊缝的成型质量。

The structure and dimension of welding pin are the main factors which affects the flow direction of the plastic metal in FSW zone and the quality of the FSW seam.

6. 主要用于高压加压的天然气加气系统,防止加压天然气倒流的阀门。焊接式高压单向阀是靠管路中介质本身的流动产生的力而自动开启和关闭的,属于一种自动阀门。

Welding type high pressure check valve is generated by the pipeline flow of the medium itself force automatically turned on and off, is an automatic valve.

7. 板材厚度较小时,形成良好焊缝的规范参数范围较宽,焊接过程中接头内部发生了剧烈的塑性流动。

If the sheet is relatively thin, the range of welding parameters obtained that can get better weld quality is wider. Heavily plastic flow of the weld metal occurs inside the weld during the process.

8. 焊接式高压单向阀只允许介质向一个方向流动,而且阻止方向流动。

Welding type high pressure check valve is only allowing media to flow in one direction, and stop the flow direction.

9. 含银量高、熔点稳定,具有优异的渗透性和流动性,适于焊接薄膜、温控、电器装置等接触面小的工件;

Alloys with a high silver content, small melting range, excellent capillarity and fluidity. Used for brazing thin joints such as diaphragms, thermostats, electrical equipment, etc.

10. 分析了在压力容器环缝组对及焊接中存在的错边、间隙不均匀以及焊接中熔池流动等问题。

The problems such as fissure of displacement, slit nonuniform and weld puddle flowing etc at the case of assembling and welding on orbital slit of pressure vessel are analyzed.

11. 超声振动的引入降低金属流动阻力和流体压力的沿程损失,提高流动速度,提高了焊缝质量,也可有效解决厚板焊接困难。

The introduction of ultrasonic vibration reduces the metal flow resistance and fluid pressure loss, raises the flow speed, raises the welding quality and facilitates welding of thick plates.

12. 本实用新型涉及一种模具组件,尤其涉及一种用以测试放热焊接 剂熔化金属流动性的模具组件。

The utility model relates to a mould component, in particular relates to a mould component for testing exothermic solder molten metal mobility.

13. 该模具组件可以用以测试放热焊接剂熔化金属流动性。

The mould component can be used for testing exothermic solder molten metal mobility.

14. 激光深熔焊接的传热过程包括热传导和焊接熔池内熔融材料的对流流动。

The heat transfer in laser deep penetration welding includes heat conduction and convection in the welding pool.

15. 适用于回流焊,流动和铁焊接过程。

Suitable for reflow, flow and iron solderings.

16. 熔敷金属流动性较308l为佳,在焊接操作上也更优越。

Deposited metal fluidity better than 308l, on weld the operation too more superior.

17. 低熔点及良好的流动性使母材焊接变形很小。

Low melting point and good liquidity to base the welding deformation is small.

18. 结果表明,焊接电流和表面张力温度系数对熔池内部流动有着至关重要的影响,决定了TIG熔池的截面形貌。

The results showed that: the welding current and surface tension temperature coefficient has a critical influence on the internal flow of weld pool and determines the shape of TIG welding pool.

19. 结果表明,焊接电流和表面张力温度系数对熔池内部流动有着至关重要的影响,决定了TIG熔池的截面形貌。

The results showed that: the welding current and surface tension temperature coefficient has a critical influence on the internal flow of weld pool and determines the shape of TIG welding pool.

版权声明:问题易所有作品(图文、音视频)均来源网络,版权归原创作者所有,与本站立场无关,如不慎侵犯了你的权益,请联系我们告知,我们将做删除处理!