
词语导航
基本信息
词语:填充塑料
繁体:填充塑料
拼音:tián chōng sù liào
英语翻译
【化】 filled plastics
分词翻译
填充的英语翻译:
fill; fill in; fill in the blanks
【计】 fill; pad-out; padding
【化】 filling; loading; packing
【经】 padding
塑料的英语翻译:
【化】 plastic; plastics
【医】 plastic
翻译例句
1. 包装:每台电脑包在塑料袋内,然后装入标准出口纸箱,箱内四周填充塑料泡沫。
Packing: Each set is wrapped in a polybag and packed in a standard export cardboard carton lined with foam.
2. 请不要把LAKOTA的航空级单向碳纤维叶片与碳距阵化合物或碳填充塑料叶片混淆。
Lakotas aerospace grade unidirectional carbon fiber blades are not to be confused with carbon matrix or carbon reinforced plastic blades.
3. 在涂料、颜料、填充塑料的生产过程中,固体颗粒在介质中的分散性能直接影响产品质量。
In the production of coating, colorant, and filled plastics, the dispersion of solid particles in the agent directly determines the product quality.
4. 经过原材料的选择和加工工艺的筛选,淀粉填充塑料地膜可以进行工业化生产,其产品技术性能接近LDPE地膜的技术指标。
The optimum formulation and processing technologies for the film were selected for the commercial production and the technological characteristics of the film were approached that of the LDPE film.
5. 多个直径12英寸的布套膨胀弯曲成合适的形状用塑料树脂增强然后并排安装并填充混凝土像巨型通心粉似的。
These are 12-inch-diameter tubes that have been inflated, bent to the proper shape and stiffened with a plastic resin, then installed side by side and stuffed with concrete, like giant manicotti.
6. 木制玩具是典型的不含任何化学塑料填充物的玩具。
Wooden playthings typically don"t contain any chemical-filled plastics.
7. 为了让我记住这一点,我随身携带了一个填充绒毛玩具,是在佛罗里达一次演讲结束时五岁的安波·玛丽带给我的一只斑点狗,同时还有一个装有几枚硬币的塑料袋。
To remind me of that, I carry a stuffed toy, a small spotted dog that five-year-old Amber Mary brought me, along with a plastic bag holding a few pennies, at the end of a talk I gave in Florida.
8. 第一个,用于制造产品的原料的实际成本,如生产玩具的布料和玩具填充物,生产飞盘的塑料树脂。
First, there are the actual costs of the materials used to manufacture the product, which would be the textile material and stuffing for the toy animal and the plastic resin for the Frisbee.
9. 用塑料填充气凝胶的微孔应该会去掉它的易碎性。并且对应地,在气凝胶内部的粘土分子网络还会阻止塑料破裂。
Filling the pores in the aerogel with plastic should remove its fragility and, conversely, the network of clay molecules in the aerogel will stop the plastic cracking.
10. 如果一个凹痕被装满塑料的身体填充剂,磁铁将黏不住。
If a dent was filled with plastic body filler, the magnet won"t stick.
11. 增强塑料的流动性几填充效果。
Improve the fluidity and filling effect of plastics.
12. 矿物超细粉体作为高性能混凝土、塑料、纸张等复合材料的填充组分,具有降低成本、改善制品性能的作用。
Being as a filling component in composite materials including concrete, plastics and paper, mineral ultrafines can improve products performance with low production cost.
13. 在塑料填充改性领域中,一般采用超微细或纳米无机粉体作为填充材料。
In the field of filled modified plastics, the superfine or nanometer inorganic powders usually were used as a filling materials.
14. 使厚壁成型注塑周期可降低60%以上,增强塑料的流动性及填充效果。
The injection molding period for the thick wall forming may be reduced by over 60%, improving plastics fluidity and filling effect.
15. 使厚壁成型注塑周期可降低60%以上,增强塑料的流动性及填充效果。
The injection molding period f the thick wall fming may be reduced by over 60%, improving plastics" fluidity filling effect.
16. 利用植物纤维填充热塑性树脂来开发仿木塑料产品越来越受到人们的重视。WwW.WeNTiyI.Com
Much attention was paid on thermoplastics filled with plant-fibers to produce wood-like plastics.
17. 讨论塑料编织袋及其填充材料中钙测定的条件试验,建立了可靠的分析方法。
Discusses the conditional tests for the determination of calcium content in the plastic knitted sack and its packing material, and establishes a reliable analytical method.
18. 在达到所需重量后,密封填充后的袋子,并且将它从塑料薄膜管分离。
After the desired weight is reached, the filled bag is sealed and separated from the tube of plastic film.
19. 用途:可作涂料、油漆、油墨、橡胶、塑料、绝缘带的填充剂。
Usage: can be used for coatings, paints, inks, rubber, plastics, insulation filler zone.
20. 利用非木材纤维填充热塑性树脂来开发仿木塑料产品越来越受到人们的重视。
People pay more and more attention to develop the simulated wood plastic products which utilize the non - timber fiber to pack hot plasticity resin.
21. 造成过度填充这个结果,是因为压迫太的塑料进入工模内。过度填充导致得到一个比较重的产品和需要一个大的注塑压力。
Overpacking results from forcing too much material into the mold. The consequences of over packing are heavier parts and molded-in stress.
22. 本文研究了硅灰石填充不饱和聚酯树脂体系的一些基本性能,进而研究了模塑料的配方和性能并压制了绝缘制品。
This paper studies chiefly the basic properties of the composite of un-saturated polyester resin in which wollastonite powder is used as a filler.
23. 实验结果表明,赤泥可作为聚氯乙烯的填充剂、改性剂使用,赤泥聚氯乙烯塑料地砖具有一定的工业应用价值。
Experimental results showed that red mud could be used as filler and modifier for PVC. Red mud-PVC plastic floor tile has a certain value in industrial application.
24. 分析了粉煤灰的特性及其作为塑料制品填充剂所应满足的技术要求。
The character of fly ash and technical requirements as filling agent of plastic were analyzed.
25. 主要用于塑料、橡胶、电缆、建材等作高档填充料,是一种性能优良的增量型填充助剂。
Mainly used in plastic, rubber, cable, and building material. It is a good function high capacity filling agent.
26. 利用塑料填充改性机理,在进行塑料原料、填加剂选择基础上,进行塑料填充改性工作。
Based on selection of plastic material and filling agent, filling and modifying for the plastic are performed by the mechanism of plastic filling and modification.
27. 发泡塑料填充于内封闭空间内。
The foaming plastic is filled into the internally closed space.
28. 采用模塑成型和嵌入成型两种方法,通过改变体积填充系数、质量填充系数和芯体尺寸,制备了梯度密度聚氨酯泡沫塑料。
Gradient-density PUF was produced in two ways : mould shaping and embed shaping, through changing volume filling coefficient, mass filling coefficient, and the size of foam core.
29. 采用模塑成型和嵌入成型两种方法,通过改变体积填充系数、质量填充系数和芯体尺寸,制备了梯度密度聚氨酯泡沫塑料。
Gradient-density PUF was produced in two ways : mould shaping and embed shaping, through changing volume filling coefficient, mass filling coefficient, and the size of foam core.
版权声明:问题易所有作品(图文、音视频)均来源网络,版权归原创作者所有,与本站立场无关,如不慎侵犯了你的权益,请联系我们告知,我们将做删除处理!
