
词语导航
基本信息
词语:应变能量
繁体:應變能量
拼音:yīng biàn néng liáng
英语翻译
【计】 strain-energy
分词翻译
应变的英语翻译:
meet an emergency
【化】 strain
【医】 strain; straining
能量的英语翻译:
energy
【化】 energy
【医】 capacity
【经】 capacity; energy
翻译例句
1. 主震后15天内最大近震的应变能量和发震时间。
The strain energy of the near maximum shock occurred within 15 days after the main shock.
2. 可恢复的应变能量是一种在缠绕过程中被储存的弹性能。
The recovered energy is the elastic energy that is stored during reeling.
3. 有限元解析中所采用的砂土本构模型以修正塑性应变能量为硬软化基本参量,它可以较为精确地模拟砂土的应力路径效果。
The constitutive model is developed to have a stress path-independent work-hardening parameter based on the modified plastic strain energy concept.
4. 稳定蠕变应变率本构方程是作用在盐岩上的应力偏量的幂次函数和能量与温度的指数函数。
The steady-state creep strain rate is a power function of deviatoric stress and exponential function of temperature and energy.
5. 采用该模型模拟了脑部正碰的过程,得到了碰撞过程的速度、能量、应变和应力曲线。
With it we simulate a brain front crash process, and get the curves which describe the process"s speed, energy, strain and stress.
6. 最小弯曲能量法以结构的弯曲应变能为目标函数,通过求出最小弯曲能量来求得合理索力。
The least bending energy method takes the bending energy as the objective function, and gets the reasonable cable forces by seeking the least bending energy.
7. 在这一理论框架下,增量的应力应变关系可以从所构造的能量函数中推导出来。
Under this framework, the stress-strain relations are derived from a pseudo-elastic strain-energy density.
8. 通常薄膜材料具有比其块材更高的能量密度、更大的应变能力以及更快的响应时间。
In general, thin films have higher energy densities, larger strain capabilities, and more rapid response times than their bulk counterparts.
9. 超磁致伸缩材料作为一种新型功能材料具有应变大,输出力大,响应速度快,能量转换效率高等特点。
Giant magnetostrictive material is a new type of function material with giant strain, great output force, high response speed and strong energy transition efficiency.
10. 从能量原理出发,以最小应变能为控制条件,给出两点吊吊点最佳位置的设计。
Starting from the energy principle and regarding the minimum strain energy as control condition, we get the best position design of the hanging point.
11. 稳定蠕变应变率本构方程是作用在盐岩上的应力偏量的幂次函数和能量与温度的指数函数。
The steady state creep strain rate is a power function of deviatoric stress and exponential function of temperature and energy.
12. 介绍应变量子阱材料的稳定性理论——能量平衡模型;
The energy equilibrium model—The stability theorem on the strained quantum well structure materials have been introduced in the paper.
13. 结果表明,机械能量损耗、损耗角及累积最大弹性应变等指标能评定地毯的铺地性能。
The results show that the loss of mechanical energy, the loss angle and the accumulation of the large elastic strain energy can be used to evaluate covering properties of carpets.
14. 在平面应变假设下,给出其二维精确解,并提供了机械应变能释放率和裂尖能量释放率等数值结果。
The two dimensional accurate solution is obtained on plane strain assumption, the numerical results of strain energy release rate and crack tip energy release rate are presented.
15. 试验从滞回曲线、刚度退化、能量耗散、延性、主筋应变及节点核心区剪切变形等方面进行了研究。
The hysteresis loop, stiffness digration, energy dissipation, ductility, reinforcement strain and shearing deformation of core of beam-column joints are studied.
16. 利用连续介质模型,计算有非应变盖层的应变外延层结构中单位面积的能量。
In this paper, the total energy in the strained layer with nonstrained capping layer is calculated using continuum model.
17. 基于能量耗散的接触面应力应变3参数模型,建立了接触面正向剪切模型。
A new interface constitutive model neglecting previous shear ratio is presented on the basis of above established 3-parameter stress-strain model.
18. 根据基于应变的失效准则和能量释放率准则来判断分层损伤的起始和扩展,以界面单元的失效表征分层扩展。
Criterions based on element strain level and energy release rate respectively were applied with the cohesive elements to estimate the initiation and evolution of the delamination.
19. 对X射线辐照圆柱壳体的平面应变热-力学效应进行数值模拟,需解决不规则四边形网格中的能量沉积计算问题。
To simulate the plane strain thermo-mechanical effect of cylindrical shell radiated by X-ray, the problem about energy deposition calculation in irregular quadrilateral grids must be solved.
20. 在特征定位的矩形框内限定变形模板的参数范围,当能量函数达到最小值时对应变形模板匹配的最佳位置。
Parameter ranges of the deformable templates are limited in the rectangle of feature location, and energy function minimum corresponds to the best position of facial feature.
21. 通过地震波的衰减规律与塑性应变变化的比较可见,能量的消耗除了几何扩展衰减外,煤岩体的塑性变形方面也起了一定的作用。
Through the comparison of seismic wave attenuation and plastic strain, except for geometrical attenuation, the plastic deformation of coal and rocks is also contributing to energy consumption.
22. 研制了一种低焊接裂纹敏感性高能量输入焊接用低合金高强钢,并研究了其冷应变时效行为。
A new large heat input welding high strength low alloy steel with low susceptivity to weld cold cracking was developed and the cold strain aging behavior was investigated.
23. 研究了泡沫金属的机械阻尼性能,表明泡沫金属是一种具有高能量吸收特性的轻质高阻尼材料,其阻尼特征表现为与应变振幅密切相关,而与应变频率无显著关系的非线性内耗。
The mechanical damping properties of metallic foams has been studied in the paper. It is found that metallic foams is a light high-damping material with great energy absorbing characteristics.
24. 不要改变饮食习惯食量的增加或减少都会影响你注意力的集中、身体能量供应及应变能力。
Do not change your diet Eating more or less can change your concentration, energy level and ability to stay alert.
25. 复合材料是应变率敏感的材料,随着应变速率的增加,其屈服强度先增高后降低,而其单位体积吸收的能量则呈上升的趋势。
The composite was a type of strain rate sensitive material. With the increasing of strain ratio, the yield strength of composite increased firstly and then decreased,...
26. 平砧锻造是塑性大变形问题,本文采用随动坐标系跟踪流动质点,利用能量法分步计算质点位移增量、等效应变场等,然后叠加。
To improve the accuracy of large floating point number calculatation, an iterative approach of inverse transformation for Gauss projection with floating coordinate system is presented.www.WENTiyI.cOM
27. 平砧锻造是塑性大变形问题,本文采用随动坐标系跟踪流动质点,利用能量法分步计算质点位移增量、等效应变场等,然后叠加。
To improve the accuracy of large floating point number calculatation, an iterative approach of inverse transformation for Gauss projection with floating coordinate system is presented.
版权声明:问题易所有作品(图文、音视频)均来源网络,版权归原创作者所有,与本站立场无关,如不慎侵犯了你的权益,请联系我们告知,我们将做删除处理!
