校准参数用英语怎么说,校准参数的英文翻译


词语导航

基本信息

词语:校准参数

繁体:校準參數

拼音:xiào zhǔn cān shù

英语翻译

【计】 calibration parameter

分词翻译

校准的英语翻译:

adjust; calibrate; calibration; true up; try up
【计】 aligning; alignment
【化】 calibrate; calibration
【医】 calibration

参数的英语翻译:

parameter
【计】 argument
【医】 parameter
【经】 parameter

翻译例句

1. 建立了关于校准参数的共线性方程,并对其进行线性化。

A collinearity equation of the calibration parameters was derived and linearized.

2. 另外,传感器电路中包含了一个校准电路来提供产生校准参数的校准电流。

In addition, a calibration circuit is incorporated in the sensor circuit for providing calibration current, which is used to generate calibration parameter.

3. 这种基于整体测量系统的校准模型使得校准参数相互关联,容易造成校准过程发散。

The calibration model based on the whole measurement system makes calibration parameters inter-correlative resulting in emanative calibration process.

4. 校准模式允许图像传感器产生校准参数,这些校准参数通过内插法来提高传感器的线性度。

The calibration mode allows the image sensor generate calibration parameters which are used to improve the linearity of the sensor through a interpolation method.

5. 校准参数可以存储多达20种不同的区,使运营商能够回收该Portaflow内存校准设置。

Calibration parameters can be stored for up to twenty different sites so that operators can recall calibration setups from the Portaflow memory.

6. 参数的数字化设置使精确和快速安装和校准。

The digital setting of parameters makes for precise and rapid setup and calibration.

7. 校准实验室已公开的认证范围,包括管架集团有限公司(PSL)所需要的测量参数、范围和不确定性。

The published scope of accreditation for the calibration laboratory covers the required measurement parameters, ranges and uncertainties required by PSL.

8. 同时利用单片机和微计算机对传感器输出信号进行实时动态处理,使本传感器系统具备了参数和测试精度的自校准功能。

Meanwhile, using SMC and computer to dealing the real time dynamic to the out put signal makes this transducer system has parameter and the proofread function of measure the precision.

9. 分别用三台SIMS仪器对样品进行了深度剖析与比对,并对用作校准目的的样品主要参数进行了定值。

Depth profile analysis and comparison of samples are separately conducted by three sets of SIMS instruments and main parameters of samples used for calibration are calibrated.

10. 通过试验验证了该校准盘系统的转速稳定性并证明线速精度均达到或优于设计参数的要求;

It is verified experimentally that both stability of rotating speed and accuracy of linear velocity of this calibrating disk system have achieved or exceeded the desire of designing parameters.

11. 针对目前多波束艏摇偏差参数不同航次校准其结果相差很大的问题,分析得出了风流压差是产生此差值的主要原因。

According to the obvious difference of yaw-bias in different voyage calibrations, the result of analysis shows that the leeway and drift Angle is the primary reason.

12. 数据库的屏幕显示,其中压力表或仪器需要加以校准并给出了他们的基本参数。

The database screen indicates which gauges or instruments need to be calibrated and gives their basic parameters.

13. 本文提出了一个用自动测量线的六端口技术,使校准网络参数的标准负载仅用一个。

This paper advance a six-pore reflectometer of automatic slot line, only one standard load is on calibrating network parameter.

14. 最后利用网络分析仪的10项误差修正原理完成了脊波导的TRL校准,实现了脊波导器件微波参数的准确测试。

The TRL calibration was completed using 10 error correction models in the vector network analyzer. The accurate measurement of double ridge waveguide device was realized.

15. 确保电阻率测井参数的量值准确可靠是仪器校准的主要目的。

It is the main purpose of instrument calibration to ensure an accurate and reliable magnitude of resistivity log parameters.

16. 该方法从TRL校准出发,实际测量得到封装器件的S参数;

Reliedon the TRL calibration, the device S-parameters was got by practical measurement.

17. 作为汽车检测的基本设备—四轮定位仪,是汽车检测维修行业的核心设备,用于测量和校准汽车的车轮定位参数。

Four-wheel alignment, as a basic equipment of vehicle inspection and test is also the core equipment to measure and calibrate the parameter of wheel alignment.

18. 利用传感器的时域校准数据得到了传感器的参数模型,进而求得了传感器的频率特性。

The method can establish continuous transfer function model of the transducer using calibration data in time domain.

19. 介绍了一种基于现场校准的动静载综合参数校准装置。

This paper introduces a kind of integrative parameter calibration system in the field.

20. 闪变仪校准时需要调整的参数是传递函数的放大倍数,即增益K。

The parameter must be adjusted is the gain K in the transfer function.

21. 齿轮渐开线样板和螺旋线样板是齿轮参数的标准计量器具,分别用于齿轮仪器渐开线、螺旋线参数的校准。

The gear involute master and helix master are measurement standards and usually used to calibrate the involute and helix parameters of gear equipments.

22. 完成了火炮的点火通断控制、多路工作电源输出通断控制、接口参数测试、系统自检、系统校准,回放分析等功能。

The system functions of ignition on-off control, multi-way power supply on-off control, interface parameters measurement, system self-check, system calibration, replay analysis are realized.

23. 本文详细研究了基于NTN 校准技术的脉冲波形参数国家基准的不确定度。wwW.wENtIyI.Com

Uncertainty of national standard parameter based on NTN technology is discussed detailedly in the dissertation.

24. 〇密码保护,只允许专管人员操作,防止非授权人改变参数,无需维护、无需定期校准。

Password protection, allowing only in charge of personnel, operating, preventing unauthorized people changed parameters, no need of maintenance, no need of regular calibration.

25. 实验表明,该校准方法适合于多关节坐标测量机结构参数真值的获得,并可极大地提高测量机的位置准确度。

It is demonstrated by experiment that this calibration is suitable for obtaining true structure parameters of links and the position accuracy of multi joint CMM can be improved greatly.

26. 由于设计参数的不同,当样板用于齿轮测量中心等齿轮仪器的校准时,常需要进行参数换算。

When the master is used to calibrate gear measurement equipments, such as the gear measurement center, parameters need to be converted frequently because of the different designed parameters.

27. 火箭发动机喷管三维运动参数的测试是对其精确控制的前提,其校准装置是保证测试精度的关键。

The 3d motion parameter measurement of a rocket motor nozzle is a premiss for accurately controlling the nozzle, and the calibration equipment is the key to ensure motion testing at a high precision.

28. 摘要:简述电压跌落模拟器特性,校准和参数计算。

Abstract: Brief voltage drop simulator characteristics, calibration and parameter calculation.

29. 分析了电磁兼容试验用混响室技术,它主要包括混响室的校准和性能参数确定。

The technology of the reverberation chamber for EMC test is introduced in details. The technology includes the chamber calibration and the qualification of the performance parameters.

30. 分析了电磁兼容试验用混响室技术,它主要包括混响室的校准和性能参数确定。

The technology of the reverberation chamber for EMC test is introduced in details. The technology includes the chamber calibration and the qualification of the performance parameters.

版权声明:问题易所有作品(图文、音视频)均来源网络,版权归原创作者所有,与本站立场无关,如不慎侵犯了你的权益,请联系我们告知,我们将做删除处理!