
词语导航
基本信息
词语:监控电路
繁体:監控電路
拼音:jiān kòng diàn lù
英语翻译
【计】 monitoring circuit
相关词条
1.supervisorycircuit分词翻译
监控的英语翻译:
【计】 monitoring; supervising; supervisory control电路的英语翻译:
circuit; circuitry【计】 electrocircuit
【化】 circuit; electric circuit
【医】 circuit
翻译例句
1. 通过完成电路中的各功能模块和焊盘的合理放置,对开关电源监控电路的版图进行了优化设计。
The layout design of the switch mode power supply is optimized through arranging function blocks and pads reasonably.
2. 我公司生产的PCB电源采用了全新的电源运行及监控电路,冗余量大,可以保证电源可靠运行。
PCB power supply made in our Company applies for fully new power supply operation and monitor electric circuit; it features big redundancy and assures reliable operation for power supply.WwW.wENtIyi.COm
3. 这一监控电路采用了模块化的设计思路,引入了可编程器件技术及光电隔离技术,从而提高了整个测试台的可靠性和可维护性。
This circuit makes use of modular structure, photoelectric isolation technique and programmable device and really improves the reliability and maintainability of transmitter test bench.
4. 本控制系统以高性能8位单片机at89c52为核心,结合数据采集电路、信号输出电路、实时时钟电路、系统监控电路组成。
The control system is composed of AT89C52, a high-powered 8-bit microcontroller, data gathering circuit, real time circuit, data output circuit and system watch circuit.
5. 详细介绍了微处理器监控器件MAX706的性能、特点和工作原理,并给出了该器件的典型应用电路。
This paper elaborates on the performances, characteristics, and working principles of Microprocessor Watchdog MAX706. Its typical application circuit is also provided.
6. 本文从通信调度的模式、人员、通信监控三方面入手,阐述加强通信调度建设,提高通信电路的管理水平。
This paper describes how to strengthen communication dispatching developments and enhance the management level of communication circuit from three aspects: model, staff and communication control.
7. 本文介绍了采用负温度系数热敏电阻作为温度传感元件的冷库温度自动监控仪的电路设计及其工作原理。
This paper presents the working principle and electronic circuits of an automatic temperature monitor for refrigerating storage applications with the NTC thermistor as its sensing element.
8. 本文给出了一种监控系统控制云台及电动镜头动作的解码电路,详细论述了系统的构成及各部分的原理。
This paper introduces a decoding circuit for controlling PAN/TILT and LENS actions in monitor system, and presents the system"s structure and principle of all components in detail.
9. 给出了智能监控变电站控制系统的硬件电路、软件设计程序和通信程序设计。
Gave the intelligence to monitor the transformer substation control system the hardware electric circuit, the software design procedure and the signal procedure design.
10. 给出了系统结构、接口电路、监控软件的设计与实现,介绍了系统的功能与特点。
The designing and realization of system structure and interface circuit and monitoring software is presented, at the same time, the system functions and characteristics is introduced.
11. 采用统计过程控制(SPC)技术,提高微电路产品的质量和可靠性,监控键合工序的生产过程状态。
Statistical process control (SPC) technique is used to improve quality and reliability of microelectronic products, and monitor production conditions of wire bonding process.
12. 建构了电路板锡膏的三维测量系统,实现了印刷锡膏均匀性参数的获取,从而达到对表面贴装质量进行监控和评价的目的。
The uniformity parameters of solder paste can be extracted by this system, which is competent for the quality control of surface mount technology (SMT) product line.
13. 在线保护机制可实时对半导体激光器工作监控,半导体激光器的慢启动电路、温控电路保证了半导体激光器安全工作。
The online protection mechanism could monitor the semiconductor laser in real time. The slowly startup circuit and thermo-control circuit ensure that the semiconductor laser could work safely.
14. 给出了看门狗、掉电后供电延时、电源故障实时监控和自动复位等功能的实现电路及相关程序。
The implementing circuits of watchdog, delay on power outage, power failure monitoring and automatic reset and related program are given.
15. 本课题来源于横向课题,是为贵州南华仪器厂的NH4602可程控示波器校准仪升级数字控制部分电路以及相应的监控软件。
The project is to upgrade the digital circuit and monitor software for NH4602-the programmable time and amplitude set test model developed by our lab several years ago.
16. 该电路能实现对架空索道运行状态的监控,电路结构简单、性能高、成本低,具有实用价值。
This circuit has made a success in watching the running of the aerial railway, with the qualities of simple circuit structure, fine properties, low cost and practical value.
17. 以LKJ2000型监控电源插件为例,介绍模块化电源的功能,阐述了模块化电源的过压、欠压保护电路的工作原理及各路输出过流保护电路的工作原理。
Taking the power board of type LKJ2000train monitoring and recording device as an example, the paper describes the function of the modular power supply.
18. 介绍了一种适用于户外电网远程监测监控的不间断高频开关电源,设计了一种简易可靠的110V/2 2 0V自动切换电路,以满足宽范围电压输入要求。
A novel high frequency switch power supply, which is suitable for power network outside, is introduced in this paper, and a automation switching circuit for 110V/220V input voltage has been designed.
19. 介绍了一种电力监控系统中控制电路设计方案。详细描述了该电路的功能、设计思想及电路工作原理。
This paper introduces the design of control circuit for power monitor and control system, and mainly describes some conceptions in design, functions and principle of the circuit.
20. 提出一种用于电视监控系统的电路方案,以单通道方式传送监控点地址和前端设备各种控制信息。
A scheme applicable to TV monitoring system is presented for transmitting the addresses of the supervising points and various control information from the head-end equipment in a single channel.
21. 针对视频监控中摄像机镜头光圈大小、图像聚焦、图像变焦三项参数的控制问题,介绍了一种基于89c51单片机的镜头控制电路的设计。
Abstract: The design of camera lens control circuit based on 89c51 is introduced. This circuit can adjust parameters of camera such as aperture, zoom and focusing.
22. 高可靠性雷达接收机自动测试系统采用USB总线、增加了接收机状态控制、仪表在线监控功能和电路自检功能。
The radar automatic test instrument USES USB, and increases special state controller, on-line instruments controller and BIT.
23. 在硬件方面,本文设计了一个基于32位ARM微处理器LPC 2104的硬件实验平台,并结合嵌入式系统远程监控的需要,给出了硬件电路的整体设计原理和实现方法。
The 32-bit ARM embedded microprocessor, LPC2104, is selected as the core of hardware experiment circuit board, and the designing of hardware circuit is given.
24. 本文在分析现有监控系统不足的基础上,提出了一套本地用通信电源监控系统方案,并对其下位机部分的硬件电路设计进行了详细的论述。
Based on the analysis of shortness in present supervision and control systems, a set of project for supervision and control system for local telecommunication power supply is presented.
25. 本文简述了余度技术中的模型监控,介绍了籍助于模拟技术确定模型监控中各参数的方法,所得的参数——安全门限值和延迟电路的时间常数可作设计比较器的依据。
This paper gives an explicit description of the model monitoring in redundance technique It brings forth a method of determining parameters in model monitoring by using simulation technique.
26. 本文简述了余度技术中的模型监控,介绍了籍助于模拟技术确定模型监控中各参数的方法,所得的参数——安全门限值和延迟电路的时间常数可作设计比较器的依据。
This paper gives an explicit description of the model monitoring in redundance technique It brings forth a method of determining parameters in model monitoring by using simulation technique.
版权声明:问题易所有作品(图文、音视频)均来源网络,版权归原创作者所有,与本站立场无关,如不慎侵犯了你的权益,请联系我们告知,我们将做删除处理!
