弯曲疲劳用英语怎么说,弯曲疲劳的英文翻译


词语导航

基本信息

词语:弯曲疲劳

繁体:彎曲疲勞

拼音:wān qū pí láo

英语翻译

【化】 fatigue under flexing

相关词条

1.bendingfatigue  

分词翻译

弯曲的英语翻译:

bend; crook; curl; curve; incurve; inflect; swerve; wind
【计】 baw; bawing; inflexion
【化】 bending
【医】 anacampsis; anchylo-; ancylo-; anfractuosity; ankyla; ankylo-
arcuation; dilaceration; gryposis; incurvation; rhaebosis; rhebosis
scolio-

疲劳的英语翻译:

fatigue; prostration; tire; tiredness; wear out; weariness
【化】 fatigue
【医】 defatigation; fatigue

翻译例句

1. 阐述了某汽车前轴的垂直弯曲疲劳试验。

A vertical bending fatigue experiment for a certain model of automotive front axle is reported in this paper.

2. 结果表明,其断裂形式为弯曲疲劳断裂。

The results indicated that the fracture mode is the fatigue failure.

3. 旋转弯曲疲劳强度是抗裂纹扩展能力的判据。

The rotating bending fatigue strength is the criterion of resistance to propagation of hot cracks.

4. 对路面用钢纤维混凝土材料的弯曲疲劳进行了试验研究。

The flexural fatigue property of steel fiber reinforced concrete material for the pavement surface stratum is investigated experimentally.wwW.WeNTIyi.cOm

5. 活性粉末混凝土的弯曲疲劳寿命分布服从两参数威布尔分布。

The bending fatigue life of RPC can be described by two parameter Weibull distribution.

6. 本发明改 进了耐弯曲疲劳性,并且不降低阻气性和耐热性。

The present invention improves bending fatigue resistance without reducing the gas barrier properties and heat resistance.

7. 根据汽车车轮弯曲疲劳实验数据建立该种车轮的有限元模型。

The finite element model of this kind of wheel is established according to the bending fatigue experimental data of automobile wheel.

8. 家轿后减振器活塞杆在进行旋转弯曲疲劳试验时出现早期断裂。

The piston rod of family sedan"s rear snubber fractured duringearlier stage of rotary bending fatigue test.

9. 应用齿顶整圆弧滚刀是提高齿轮弯曲疲劳强度的有效措施之一。

Full radius hob on tooth tip is one of the effective measures by increasing gear tooth bending strength.

10. 结果表明黑色组织降低了齿轮的疲劳性能,尤其是弯曲疲劳性能。

The results showed that black microstructure reduced fatigue behaviors, especially repeated bend behaviors.

11. 研究了玻璃纤维、有机纤维及混杂纤维增强混凝土的弯曲疲劳特性。

The flexural fatigue properties of glass fiber, organic fiber, and hybrid fibers reinforced concrete were studied.

12. 研究了有机玻璃边缘连接元件在不同温度下的拉伸和弯曲疲劳特性。

Tension and bending fatigue tests were carried out to investigate the fatigue behavior of polymethylmethacrylate for edge attachment element at different temperatures.

13. 同时,共渗在空心滚子内表面造成的压应力对改善弯曲疲劳性能有利。

Meantime, the compressive stress in inner surface of hollow roller by nitrocarburizing is available for improvement of bend fatigue property.

14. 研究了钢丝绳弯曲疲劳历程中,磁导率在不同空间频率区间的变化规律。

The law ofpermeability changes of different frequency range was studied during the wire rope fatigue test.

15. 用旋转弯曲疲劳试验机试验了不同稀土含量对几种结构钢疲劳性能的作用。

The effect of RE on fatigue behaviours of structural steels was investigated with a rotating bending fatigue machine.

16. 齿轮的弯曲疲劳强度与接触疲劳强度是判断齿轮使用寿命的重要指标之一。

The intensity of bending fatigue and contact fatigue for gears is one of the important indices (indexes) to judge gear service life.

17. 分析表明,高幅值的残余压应力和“有效晶粒”细化是提高弯曲疲劳性能的主要因素。

The results of the analyses show that high residual compressive stress and fine scattered martensite units are the main cause of improving fatigue properties.

18. 在某车轮厂,以试轧钢板为材料进行了轮辐试制并对总成车轮进行了动态弯曲疲劳试验。

The wheel spokes were made from steel and dynamic cornering fatigue test was carried out on assembled wheels.

19. 基于这种分析结果,提出了板材弯曲疲劳等应力试样设计原理以及推荐试样的形状和尺寸。

Based on the analysis, the principle of iso-stress sample design and the shape and dimensions of a recommended iso-stress specimen for bending fatigue of sheet materials have been suggested.

20. 用光学、扫描电子显微镜及显微硬度计,研究了低碳钢在高频弯曲疲劳过程中的形变及断裂。

The deformation and fracture of mild steel under high frequency bending fatigue has been studied by optical microscope, scanning electron microscope and microhardness determination.

21. 本研究进行了渗硼试样的拉伸、多次冲击以及旋转弯曲疲劳试验,并与未渗硼试样进行比较。

In the present study, tensile and repeated impact as well as rotated-bending fatigue tests were carried out.

22. 经过低幅载荷强化,该齿轮轮齿的弯曲疲劳强度提高了3.97%,弯曲疲劳寿命提高了109%。

By strengthening under low amplitude loading, bend fatigue strength and life of gear teeth can be increased by 3.97 and 109 percents, respectively.

23. 然后测量涂层和基体的硬度,并通过采用旋转弯曲疲劳试验比较涂层试样与未涂层试样的疲劳强度。

Then hardness of coatings and substrate was measured. By means of bend-rotation fatigue tests, fatigue strength of coating and uncoating specimens was compared after hardening and tempering.

24. 本文对921A钢焊接接头在海水腐蚀环境下受弯曲疲劳载菏作用时表面裂纹扩展规律进行了试验研究。

The propagation of surface cracks in welded connections made of type "921A" steel has been investigated experimentally under bending fatigue load and in the corrosive environment of seawater.

25. 结果表明,高能喷丸后其表层组织发生严重塑性变形并实现组织纳米化,是提高弯曲疲劳寿命的主要原因。

The result indicates that the improvement of the fatigue limit is due to the nano-crystallization and severe plastic deformation in the surface layer induced by high-energy shot peening.

26. 基于二维线性断裂力学理论,提出了一种表面淬火齿轮的弯曲疲劳寿命预测方法,并开发了相应的计算程序。

A method for predicting the bending fatigue life of a surface quenched gear is proposed based on two-dimensional linear fracture mechanics and a computer program is developed.

27. 在实验基础上,用疲劳统计学理论研究了RPC弯曲疲劳寿命的概率分布规律,得出RPC的疲劳寿命方程。

Based on the experiments, fatigue life distribution of RPC is studied using fatigue life statistics theory, the fatigue life equation is established.

28. 当弯曲试板上的最大应变等于波纹管的最大局部应变时,板的弯曲疲劳试验寿命即可代替波纹管的试验寿命。

The fatigue test of the bellows expansion joints is replaced by the bent fatigue test of plates when the maximum strain of bent test plates equals to the local strain of bellows expansion joints.

29. 当弯曲试板上的最大应变等于波纹管的最大局部应变时,板的弯曲疲劳试验寿命即可代替波纹管的试验寿命。

The fatigue test of the bellows expansion joints is replaced by the bent fatigue test of plates when the maximum strain of bent test plates equals to the local strain of bellows expansion joints.

版权声明:问题易所有作品(图文、音视频)均来源网络,版权归原创作者所有,与本站立场无关,如不慎侵犯了你的权益,请联系我们告知,我们将做删除处理!