加热孔用英语怎么说,加热孔的英文翻译


词语导航

基本信息

词语:加热孔

繁体:加熱孔

拼音:jiā rè kǒng

英语翻译

【化】 glory-hole

分词翻译

加热的英语翻译:

cook; heat; heating
【化】 heating
【医】 firing; heating

孔的英语翻译:wwW.weNTiYI.com

aperture; bore; foramen; hole; os; ostium; vulva
【化】 hole; opening
【医】 apertura; aperturae; aperture; bore; coel-; foramen; foramina; hiatus
mesh; opening; pore; Pori; porosity; porus; trema

翻译例句

1. 先用叉子把土豆戳得“千疮百孔”,再加热2分钟,取出。

Prick the potatoes all over with a fork and cook for 2 minutes.

2. 车间设备和手动工具,如刨机,模板,孔锯,加热毯,热电偶,真空袋,测量设备,公英制转换工具等。

Shop equipment and hand tools, such as router, templates and hole saws, heat blankets and thermocouples, vacuum bags and caul plates, measuring devices, conversion of metric and inch system.

3. 改变一下吧,在米饭中间放一块冰块,然后盖上保鲜膜,当然,加热之前还要在保鲜膜上戳几个孔。

Change that by placing an ice cube in the center of the rice and then wrapping the top with plastic wrap, with a few punctures of course, before reheating it.

4. 空气经加热净化后,由引风机从下部导入,穿过料斗的孔网板。

Purified and heated air is immited from the bottom by fan and passed through the screen plate of hopper.

5. 阿克雷·奥拉员工浇注到表孔加热蜡。

Crayola employee pours the heated wax onto the hole table.

6. 其中感应电加热器呈中间具有开孔的双矩形,其是由感应线束缠绕而形成。

The induction electric heater is in a double-rectangular shape with an opening in the middle, and is formed by winding an induction wire harness.

7. 报道了所研制的大开孔三段加热中温黑体炉腔体热源布置原则。

Describes the layout of heating sources in a moderate-temperature blackbody furnace we developed with big opening and 3-zone heating.

8. 阿克雷·奥拉员工浇注到表孔加热蜡。

A Crayola employee pours the heated wax onto the hole table.

9. 介绍了内锥孔火焰淬火机床、工装和喷头的设计以及淬火加热温度和相平衡时间的确定方法。

This paper introduces the design of taper bore flame hardening machine, fixtures, nozzles block and the methods to determine hardening temperature and phase balancing time.

10. 研究了高交联大孔苯乙烯-二乙烯苯共聚物(60%DVB)在微波加热条件下发生的磺化反应。

The sulfonation of highly crosslinked macroporous styrene-divinylbenzene copolymers (60% DVB) by microwave heating was studied. The high power set and intermittent heating mode was adopted.

11. 一个寒冷的晚上,加布里埃尔精疲力尽的回到家,屋子里炉子加热的空气让他昏昏欲睡,他很快便睡着了,睡之前忘了打开一个通风孔透气。

Then, one freezing night, Gabriel returned, exhausted, to his hut. The warm air from the stove made him sleepy, and he forgot to open one of the air-holes before going to sleep.

12. 本发明涉及一种硅钢高温退火环形加热炉中找正锁紧孔与锁紧导杆的同心度的方法。

The invention relates to a method for aligning the concentricity of a locking hole and a locking guide rod in a silicon steel high-temperature annealing ring-shaped heating furnace.

13. 研究辐射加热腔诊断孔堵口现象。

The study on pinhole closure of diagnostic pinhole in the cavity heated by radiation is reported.

14. 将加热器-空调电线束接头和鼓风马达继电器电线束接头推入扣件与它们加热器-空调外壳里的固定孔啮合。

Engage the heater-A/C wire harness connector and blower motor relay wire harness connector push-in retainers with their mounting holes in the heater-A/C housing.

15. 将加热器-空调电线束接头和鼓风马达继电器电线束接头推入扣件与它们加热器-空调外壳里的固定孔啮合。

Engage the heater-A/C wire harness connector and blower motor relay wire harness connector push-in retainers with their mounting holes in the heater-A/C housing.

版权声明:问题易所有作品(图文、音视频)均来源网络,版权归原创作者所有,与本站立场无关,如不慎侵犯了你的权益,请联系我们告知,我们将做删除处理!