
词语导航
基本信息
词语:宽度参数
繁体:寬度參數
拼音:kuān dù cān shù
英语翻译
【计】 width parameter
分词翻译
宽度的英语翻译:
breadth; width
【医】 width
参数的英语翻译:
parameter
【计】 argument
【医】 parameter
【经】 parameter
翻译例句
1. 特点:自动化程度高,切条宽度参数准确,操作灵活方便。
Features: High automation degree, accurate parameter of slitting width, flexible and convenient operation.
2. 如果没有提供宽度参数,那么将自动根据注释参数本身计算相应的宽度(strlen(a:comment)+2)。
If no width argument is given, the appropriate width is autocomputed from the comment argument itself (strlen(a:comment)+2).
3. 类似于“将长度和宽度以参数的形式传递给面积和周长,而非在构造函数里指定”这样的错误,可以通过重构来修正。Www.WenTiYI.COm
Mistakes, like passing the length and width as parameters to Area and Perimeter rather than to the constructor, are corrected by refactoring.
4. 可选参数可以添加在文本字符串之后,用来指定评论人,用作 “框”的字符,以及评论的宽度。
Optional arguments could be added after the text string to specify the comment introducer, the character used as the "box," and the width of the comment.
5. yesno选项需要至少三个参数:问题文本以及对话框本身的高度和宽度,后者用行和列度量。
The — yesno option requires at least three arguments: text for the question and the height and width of the dialog box itself, measured in rows and columns.
6. 然而,如果提供额外的参数,那么将为注释导入器、“boxing”字符和注释宽度指定非默认值。
Whereas, if you provided extra arguments, they would specify non-default values for the comment introducer, the "boxing" character, and the comment width. So this call
7. 结论:由髌骨的宽度、高度和厚度的数值,可推算出髌骨假体个性化设计所需的参数。
Conclusion: With the measurements of patellar width, height and thickness, the parameters for personalized design of patellar prosthesis can be calculated.
8. 分析和数值模拟了用瞬态简并四波混频实现光学啁啾反转的器件的主要参数对恢复信号波形和脉冲宽度能力的影响。
The influence of the principal parameters of optical chirp reversal devices on ability to restore signal wave form and pulse duration has been analysed and simulated.
9. 指定了插字符的宽度(逻辑单位)。如果这个参数为0,则宽度被设为系统定义的窗口边框宽度。
Specifies the width of the caret (in logical units). If this parameter is 0, the width is set to the system-defined window-border width.
10. 分析表明下颌骨宽度变化与各参数变化之间没有线性相关。
All other changes were not significantly correlated with the changes in mandibular width.
11. 研究表明干涉场中的相位鞍点以及涡旋点的位置与光束的离轴参数、束腰宽度、相位以及相对振幅有关。
It is shown that the positions of phase saddles and vortices depend on the off-axis parameter, beam width, phase and relative amplitude of beams.
12. 对薄层电阻、接触、光掩模对准、线条宽度、器件参数与掺杂的相关性等内容进行了初步试验和分析。
The initial experiments on and analysis of sheet resistance, contact, photomask alignment, line width, and correlations between device parameters and dopants have been made.
13. 在刻蚀硅材料的实验研究中,通过改变放电参数得到与刻蚀速度的关系,同时比较了不同宽度的图形之间的刻蚀结果。
In the study of etching silicon, we showed the different etching rate by changing the discharge parameters and compared the etching rate between the several line widths.
14. 这种设计方法是在不改变主要设计参数的基础上,通过调整齿轮宽度,实现重迭系数的圆整,提高齿轮承载能力,延长使用寿命。
It doesn"t change main designing parameters, and through adjusting the gear width, the round number of coincidence coefficient and the improvement of gear life and bearing capacity Can be realized.
15. 研究了用于快速成形的TIG熔敷堆焊工艺中各参数与焊缝宽度的关系。
The paper researches the relation of parameters and weld width of TIG deposit surfacing used in rapid prototyping.
16. 提供了阻带宽度与各结构、材料参数的关系曲线,为工程设计提供了优选结构的参考数据。
The curves of stop band width vs. geometric and constitutive parameters were provided as the optimal structure data for engineering design.
17. 研究了激光焊接输出功率、焊接速度、离焦量等工艺参数对焊接深度及焊接宽度的影响。
The effects of laser power? speed and defocusing parameter on welding depth and width have been studied in the experiment.
18. 锈胀裂缝宽度是混凝土结构耐久性与设计评估的重要参数。
Crack width is a most significant parameter for the durability assessment and design of reinforced concrete structures.
19. 系统研究了工艺参数对切缝宽度和切缝质量的影响规律。
The effects of laser process parameters on kerf width and quality were studied.
20. 寻找一些分布中的参数的具有预先给定宽度和预先给定覆盖概率的置信区间是令人感兴趣的。
Finding confidence intervals with prescribed width and prescribed coverage probability for some parameters in distributions is of great interest.
21. 交流在热通道设计中如何合理选择热通道宽度、风口布置、玻璃种类三个关键性参数的设计经验。
The design experience of how to choose three key parameters: the width of thermal channel, the layout of inlet and outlet and the type of glass is discussed.
22. 内容涉及基本原理、实验装置及加工参数对弧柱特性、切口宽度、切口角、无渣切速的影响规律。
The basic principle, test device, and the regularity of cutting parameters affecting to the arc characteristics, kerf width, kerf Angle, and dross free cutting speeds are dealt with.
23. 研究了激光光斑直径及离焦量、切割速度、激光功率等工艺参数对齿轮切缝宽度及加工质量的影响。
The effects on kerf width and quality made by laser facula diameter, focal point position, cutting speed, laser power and other technological parameters were studied.
24. 研究了通过调节数控机床伺服参数,控制极限切削宽度来抑制切削颤振的新方法。
A new method for suppressing cutting chatter is studied by adjusting servo parameters of the numerical control (NC) machine tool and controlling the limited cutting width.
25. 这些参数包括输出脉冲的频率、宽度和不同极性的两个脉冲间隙。
The parameters such as frequency, width of each pulse and the interval between successive pulses with inverse polarity can be changed easily in program.
26. 采用适合离散函数的网格法研究小麦籽粒的长度、宽度、厚度、单粒质量等参数间的分形特性。
Fractional characteristics between length, width, thickness and weight of a single kernel were studied by using net method that adapted to the discrete function.
27. CT图像分析可以获得裂纹宽度、长度、方位等定量化参数。
Through ct image analysis, the width, length and direction of crack are gained.
28. CT图像分析可以获得裂纹宽度、长度、方位等定量化参数。
Through ct image analysis, the width, length and direction of crack are gained.
版权声明:问题易所有作品(图文、音视频)均来源网络,版权归原创作者所有,与本站立场无关,如不慎侵犯了你的权益,请联系我们告知,我们将做删除处理!
