加工条件分析用英语怎么说,加工条件分析的英文翻译


词语导航

基本信息

词语:加工条件分析

繁体:加工條件分析

拼音:jiā gōng tiáo jiàn fēn xī

英语翻译

【机】 analysis of manufacturing condition

分词翻译

加工条件的英语翻译:

【化】 processing conditions

分析的英语翻译:

analyze; construe; analysis; assay
【计】 parser
【化】 analysis; assaying
【医】 analysis; anslyze
【经】 analyse

翻译例句

1. 通过对零件的加工技术条件的分析,以及切削成形运动的研究。

Through the analysis of the condition of processing technique for element, as well as the research of cutting Forming movement.

2. 文章通过对碳纤磨毛工艺的分析,介绍了仿桃皮磨毛产品加工的工艺条件和参数。

Based on the analysis of carbon fiber sand technology, the paper introduced the condition and parameters of sanding in processing peach-skin-like fabric.

3. 在分析原因之后,提出在合理的剂型配方的基础上,以适当的加工工艺条件与之相协调,使制备的产品经时贮存质量性能稳定。

After analyzing the reasons, on the basis of reasonable dosage form formula, and corresponded with proper processing technique, the preparation product can be with storage quality stability.

4. 对挤出设备、工艺条件和胶料的加工性能等方面进行较全面的分析,对生产实践有积极的意义。

Presents the analysis of extrusion equipment, production process and the processing property of compound, it is very important for production practice.

5. 加工系统仿真是利用加工系统模型在仿真环境和条件下,对加工系统进行研究分析和实验。

The processing system simulation use the processing system model to carry out the research, analysis and experiments in the simulative condition and environment.

6. 根据市场要求,对棉织物后焙烘加工工艺,包括树脂和催化剂的选择,整烫和焙烘条件(整烫温度、蒸汽湿度等)等方面进行工艺分析。

Aiming at the market demands, post curing process of cotton fabric was carried out, the influences, of selections of resin and the catalyst, curing conditions of temperature and time were analyzed.

7. 研究了以籼米为基质的脂肪替代品加工过程中的酶水解工艺,采用响应面分析法得到了最佳酶解工艺条件,并对不同干燥工艺进行了比较。

The enzymatic hydrolysis in the process of long rice based fat substitute was studied and the optimal conditions of the enzymatic hydrolysis was obtained by using Response Surface Analysis.

8. 最后结合制作加工的难易程度和经济分析等,提出了上述三类变截面支座的适用条件。

At last, the applying conditions of the abutments are suggested according to the difficult degree of manufacturing and the economy analysis.

9. 本文探讨了晶体材料的切削加工性,重点分析了切削条件对表面粗糙度的影响。

The machinability of crystal material is studied, and the influence of the cutting condition on surface roughness is analyzed.

10. 在分析磨料流加工的力学特性基础上,得出了流体磨料的粘弹性是进行磨料流加工的必要条件。

On the basis of the analysis of AFM"s mechanical properties, the conclusion that the necessary conditions of AFM are abrasive flow media"s viscoelastic property is reached.

11. 进而在符合机床实际加工状态的边界约束条件下,利用传递矩阵法对传动链扭振特性作了计算分析。

Under new boundary restraint condition in accordance with the actual working condition of the machine, the torsional freqency response is computed with complex transfer matrix method.

12. 探讨晶体材料的切削加工性,重点分析切削条件对实现镜面车削的影响。

The paper presents the machinability of crystal materials, and emphasizes the influence of cutting conditions on the mirror finish.

13. 研究了鲜言禽骨加工鲜骨泥的生产工艺流程与最佳工艺条件、“钙方”的科学配方与加工工艺,在成分分析基础上进行了营养学意义分析。

The processing technique and scientific formula of fresh mashed bone dunmpling stuffing were studied, And based on components analysis the nutritional significance was analysed.

14. 结果表明:采用加工图理论分析材料的高温变形行为能准确直观地反映出材料在不同变形条件下的组织演变规律。

As a result, deformation behavior at elevated temperature analyzed by processing map theory can indicate exactly the evolving law of structures of materials under different deformation condition.

15. 从加工原理出发,分析了实现电化学微加工的前提条件。

This paper addressed the important factors that were necessary for achieving EMM based on its fundamental principles.

16. 分析了微热板各层薄膜厚度、微热板下气隙高度、支撑桥尺寸、微热板面积大小对传感器加工、工作性能的影响,并结合实际工艺条件设计了一种采用不同支撑桥尺寸的传感器结构。

The effects of dimensions of MHP, gas gap, and supporting beams on fabrication and working performance of the sensor are analyzed, and a new sensor structure with unequal beams is designed.

17. 通过对阻燃腈纶纱的瞬时拉伸测试,分析重复拉伸条件下腈纶纱的瞬时回弹特性,定量地阐明腈纶纱瞬时拉伸回弹率与经纱开口变形的关系及其对织造加工的影响。

The relationship between the instantaneous resilience of the yarn and the shedding deformation along with its influence on weaving performance were discussed on a quantitative basis.

18. 通过热失重TGA分析以及考察加工成型过程中工艺参数变化对复合材料介电性能、力学性能的影响 ,优化了预浸料热压成型工艺条件。

The prepreg hot pressing condition is optimized by analyzing TGA and studying influence of parameters on dielectric and mechanical properties of composites.

19. 从微分几何学的角度,探讨了在五坐标数控机床上采用圆柱形刀具线接触加工自由曲面的几何学原理,分析了刀具面与被加工曲面二阶密切的条件。

On the basis of the differential geometry, the geometrical theory of machining free form surface by cylindrical cutter in 5-axis NC machine tool is investigated.

20. 针对国产康明斯气缸体铸件超高速加工条件下的加工性差问题进行了调查与分析。WwW.WEntIyI.coM

An investigation was made on the reasons causing the poor machinability of cylinder block castings for Cummins engines.

21. 针对国产康明斯气缸体铸件超高速加工条件下的加工性差问题进行了调查与分析。

An investigation was made on the reasons causing the poor machinability of cylinder block castings for Cummins engines.

版权声明:问题易所有作品(图文、音视频)均来源网络,版权归原创作者所有,与本站立场无关,如不慎侵犯了你的权益,请联系我们告知,我们将做删除处理!