加热箱用英语怎么说,加热箱的英文翻译


词语导航

基本信息

词语:加热箱

繁体:加熱箱

拼音:jiā rè xiāng

英语翻译

【化】 heating cabinet

分词翻译

加热的英语翻译:

cook; heat; heating
【化】 heating
【医】 firing; heating

箱的英语翻译:

box; case; casing; chest; hutch; tank
【医】 box; case; closet

翻译例句

1. 一名焊工的成套工具包括焊钳,焊炬,面罩,手提式焊条加热箱和测。

A welder"s kit contains electrode holder, welding torch, helmet shield, portable electrode heating box and.

2. 一名焊工的成套工具包括焊钳、焊炬、面罩、手提式焊条加热箱和测温笔。

A welder"s kit contains electrode holder, welding torch, helmet shield, portable electrode heating box and temperature measuring pen.

3. 当玻璃罐中的酵母加热到合适的温度时,哈科特就把他们倒入酿造箱,在那里酵母开始吞吃麦芽汁。

When the jar of yeast has warmed up sufficiently, Hackett dumps it into the tank, where it begins to gobble up the wort.

4. 美国宇航局在新的燃料箱上把容易泡沫胶脱落的地方进行了改装,同时安装上了加热器,以防止泡沫胶结冰。

On the new tank, NASA has reconfigured the struts and fittings where foam was prone to peeling off, and installed heaters to prevent ice from forming.

5. 环境箱可以通过使用液态氮加热组件或冷冻组件。

The chamber can heat the parts or freeze the parts using liquid nitrogen.

6. 二氧化碳培养箱引进新技术,新工艺开发的高性能的二氧化碳培养箱。具有加热快,温度精度误差小等特点。

It adopt new technology, new craft development. Heat fast, the characteristic such as being little of precision error of the temperature.

7. 为了适应这种要求,常常修建低温箱或加热炉来提供所需的温度范围。

To meet this requirement, low-temperature Chambers or furnaces are often built to provide the needed range of temperature.

8. 研究了不同进气温度、加热方式和蓄热箱容积对发动机冷起动排放的影响规律。

This paper presents the engine emissions at different intake temperature, heating methods and volume of accumulators during the cold start.

9. 大约1885年,用天然气加热烘焙箱、以热空气作为唯一的热媒介的工艺就已经被开发了,这种工艺至今仍是最好最普及的咖啡烘焙法。

About 1885, a process by which natural gas heats a roasting chamber and hot air is the only heating medium was developed, and this remains the best and most popular method of roasting coffee.www.wenTIYI.com

10. 测量装置主要包括高温环境实验箱、加热供电回路、两套高速高温计及一套激光扫描系统构成。

The apparatus mainly consists of a high temperature environmental chamber, a power circuit of heating, two high-speed pyrometers , and a laser scanning system.

11. 纺丝箱的设计主要是确定其结构、尺寸、加热形式和保温问题。

The design of spin beam mainly includes the construction, size, heating mode and the thermal insulation.

12. LGJ-25型冷冻干燥机集预冻、冻干功能于一体, 干燥箱为钟罩式结构,搁板选用电加热方式。

LGJ-25 frozen- dryer assembles two functions of pre-freeze and freeze-drying. The chamber selects the structure of the bell glass. The shelves are heated by electricity.

13. 暖通空调(HVAC)系统中建立一套对各种水阀、风阀、变风量箱、电加热器、加湿器以及其他控制元件进行准确测量及时控制的数据采集控制系统。

Builds a suit of HVAC DAQ and control system which could take precise data acquisition and control water valve, air valve, VAV box, electrical heater, humidifier and other control elements.

14. 将一种金属或合金放在一个密闭容器中对其退火。在对某一铁基合金进行闭箱退火时,通常将装料缓慢加热到低于(但有时高于或位于)转换温度范围的某一温度,然后缓慢冷却。

In box annealing a ferrous alloy, the charge is usually heated slowly to a temperature below the transformation range, but sometimes above or within it, and is then cooled slowly.

15. 它配备了加热、过滤清洗和漂洗箱以及热风干燥机。

It is equipped with heated and filtered wash and rinse tanks, isolated spray manifolds, and a hot air dryer.

16. 它适用于烘焙、干燥箱热处理或其他加热用,也是实验室常备仪器。

It is suitable for baking, drying oven on heat treatment or other heating. And it is also a regular instrument in laboratories.

17. 介绍一种可折卸指形加热管的无料盘药品精制真空干燥箱。

A kind medicine refining used vacuum drying box without tray, in which there are finger type heating pipes, was introduced.

18. 最短加热时间,与传统真空干燥箱相比加热时间减少50%以上。

Minimum heating time is over 50% less than that of traditional vacuum drying oven.

19. 介绍了钛合金超塑成形的一般工艺以及电瓶箱罩盖成形时采用的直接加热法和新的密封方式,从而解决了生产中的关键问题,取得明显的技术经济效益。

The direct heating method and the latest sealing way used in cover forming are introduced. Therefore the key problems in the production can be solved and more benefits can be gained.

20. 此系列加热器包括一个清洁的敢接加热器和一个连接箱。

These heaters come with an all purged welded heater and junction box.

21. 研制了用单片机组成的点焊控制箱,可完成三阶段加热焊接循环,实现预热、回火等。

A controlling box is developed using with 8031 single chip microprocessor. It can provides the controlling for 3 stages of heating of welding cycle, preheating and tempering etc.

22. 在最后的装配阶段,各种各样的设备被装上汽车:比如加热器,控制发动机的电脑箱,所有组成仪表板的电器设备。

At the final assembly stage the various items are fitted to the car: like the heater, like the computer box that runs the engine, like all the electrical equipment that makes up the dashboard.

23. 本方法的特征在于,在给定温度(T)下加热所述支持体的同时,在干燥箱中输送所述支持体。

This method is characterized in that the substrate is conveyed in the drying box while being heated at a given temperature (t).

24. 家用经济多功能锅炉,为一种适于家庭的锅炉,其由加热装置、集热箱、炉壳组成。

The utility model relates to a household economizing multifunction boiler, and is a boiler for household, comprising a heating device, a heat collecting box and a boiler shell.

25. 曲轴齿箱中的真空循环与加热循环之间存在的巨大交互感应(做还是不做加热循环?)

A strong interaction exists between the vacuum cycle and the heating cycle on the crank gear box (do or not do the heating cycle?)

26. 喷雾式除气器应为鹳式或证明相似结构,将除气器、预先加热器、排气冷凝器和给水储存箱的功能融合在一个容器内。

The spray type deaerator shall be Stork type or proven equivalent construction which combines in one vessel the functions of deaerator, pre-heater, vent condenser and feed water storage tank.

27. 实物恒温箱模型可以被作为小型车载冰箱、宠物箱恒温系统、饮料的加热或降温器等多用途。

The constant temperature cabinet can be used as vehicle?mounted refrigerator, thermostat system of pet box, heating or cooling device for beverage.

28. 实物恒温箱模型可以被作为小型车载冰箱、宠物箱恒温系统、饮料的加热或降温器等多用途。

The constant temperature cabinet can be used as vehicle?mounted refrigerator, thermostat system of pet box, heating or cooling device for beverage.

版权声明:问题易所有作品(图文、音视频)均来源网络,版权归原创作者所有,与本站立场无关,如不慎侵犯了你的权益,请联系我们告知,我们将做删除处理!