
词语导航
基本信息
词语:冷却区
繁体:冷卻區
拼音:lěng què qū
英语翻译
【化】 cooling zone
分词翻译
冷却的英语翻译:
cool; cooling; refrigeration
【计】 chilling; cooling
【化】 cooling
【医】 cooling; refrigeration
区的英语翻译:
area; borough; classify; distinguish; district; region; section
【计】 region
【医】 area; belt; field; quarter; regio; region; zona; zone
翻译例句
1. 葡萄酒接收区和冷却区,以确保葡萄酒在从其他地方运输后保持恒温。
C. Wine receiving area and cool down area to ensure that the wine is in constant temperature after transportation from other places.
2. 葡萄酒接收区和冷却区用以确保葡萄酒从其他地方运抵后仍能保持恒温。
C. Wine receiving area and cool down area to ensure that the wine is in constant temperature after transportation from other places.
3. 为了改善冷轧用料的板型,邯钢CSP生产线在层流冷却区应用了边部遮挡技术。
In order to improving the strip flatness produced for the cold rolling, the edge-masking technology was applied on the Hangang CSP Plant.
4. 由于较高的冷却区域的鞋或模具,不同的强调和结构的金属发生在这一地区比其余的工件。
Because of the higher rate of cooling in the region of the shoe or mould, different stresses and structures of the metal occur in this region than in the remainder of the workpiece.
5. 本课题以一台生产普通浮性水产饲料的挤压机为主机,采用配置冷却区的方式方法研究高效加工沉性水产饲料的可行性。
This thesis studies the feasibility of producing sinking aquafeed efficiently by equipping a cooling zone on a common extruder which is normally used to produce floating aquafeed.
6. 中间阶段位于蒸汽膜阶段与沸腾阶段之间。中间阶段的特点是具有等效厚度的表面上同时存在蒸汽膜冷却区和沸腾冷却区。
In middle stage, both vapor area and boiling area are co-exist on the surfaces having the same effective thickness.
7. 核反应堆活性区需要水来冷却,而海啸切断了冷却系统的电力供应,各种应急措施相继失效,迫使操作人员引海水灌入反应堆以降低其温度。wWW.wEntiyi.COM
The nuclear cores need water to cool them down, and the tsunami swamped Fukushima and initially cut off electricity powering the cooling systems.
8. 这个螺旋塔不仅其外形引人注目,而且它还通过可再生能源发电、雨水收集以及一种先进的冷却系统将住宅区、办公区、商业区与孩子的成长空间结合在一起。
Not only is the tower"s appearance striking, it also combines residential, office, commercial, and growing space with renewable energy generation, water collection and a sophisticated cooling system.
9. 在产生高于平均热量的区域需装上通风和现场冷却系统,如在主洗衣房、客人洗衣房、干洗区、面包房和员工厨房等区域。
Ventilation andspot cooling systems will carefully planned in areas that generate aboveaverage heat, such as Major Laundry, Guest Laundry and Dry Cleaning, Bakeriesand Employee cooking areas.
10. 冷却致区可以抑制神经细胞的异常放电,使其有望成为治疗难治性癫的重要手段之一。
Cooling epileptogenic foci can inhibit the abnormal discharge, it is expected to become the one of the important means of treatment of refractory epilepsy.
11. 探讨纺丝组件、冷却条件及集束上油、缓冷区、拉伸工艺等条件对产品质量的影响。
The influence of process condition such as spinning pack, cooling condition, collection oiling, annealed zone, drawing condition etc on products quality were expounded.
12. 结论:通过降低热点区SAR值的方法增加EHS,用表面冷却法增加EHD,提高微波辐射器性能。
Conclusion: With the enlarged EHS by decrease the SAR at hot spot and increased EHD by means of water superficial cooling, the MW-applicator capabilities can be improved.
13. 可安装在易燃易爆的石化企业、油罐区、输油码头、船舶等场所,作为远距离扑救油类火灾及消防冷却的有效设备。
As an effective equipment for distant putting out oil fire and cooling, it can be fixed in flammable and explosive petrochemical industry, oilcan zone, oil handling terminal, wharf and so on.
14. 低碳钢焊缝金属凝固冷却过程存在三个脆性温度区。
There exist three brittle temperature ranges during the course of solidification and cooling process in the weld metal of Low-carbon steel.
15. 在金属切削过程中,切削区的冷却和切削温度的恒定对于提高切削质量有重要的意义。
In the metal cutting, the cutting cooling and steady temperature have some important significant in pare mass.
16. 冷却过程的应力和冲击热应力也将导致材料发生塑性形变,其作用范围超过了热影响区。
The shock stress wave and the stresses associated with cooling can also lead to plastic deformations, and their affected depth extends far beyond the heat-affected zone.
17. 渗透性能好,使切削区冷却,清洗效果特别好,防止工件烧伤。
Good permeability, so that the cutting zone, cooling, cleaning and good effect, prevent the workpiece burn.
18. 利用焊接时的加热使水汽化,不仅使焊道而且使热影响区的冷却速度减慢。
Using the heat of welding to vapour water, cooling rates are lowered on the weld bead and heat -affected zone.
19. 相变区的冷却速度减慢,晶界铁素体数量增多,针状铁素体的尺寸显著增大。
The amount of ferrite in grain boundaries and the size of acicular ferrite is increased with the increase of cooling rate during phase formation.
20. 磨削区冷却液的热对流系数已由流体动力学和传热学模型估算得到。
The convection heat transfer coefficient of coolant within the grinding zone has been estimated using hydrodynamic and thermal modeling.
21. 使用这个模型,演化与D /E区电离层的加热时间,加热和冷却时间尺度的电子温度的档案,在本文的计算。
Using this model, evolution profile of electron temperature with heating time in ionospheric D/E region, heating and cooling time scale, are calculated in this paper.
22. 为了研究地板送风方式下有冷却壁面的房间的室内温度特性,本文对常用的多区热质平衡模型作了些修改。
In order to study the indoor air temperature characteristics of a chilled wall space with underfloor air supply, This paper made some modifications to the conventional multi-zonal model.
23. 从冷却原理及实际应用效果两方面都说明,喷雾冷却具有较好的切削区冷却作用和推广价值。
In cutting principle and actual application, the spray cooling has better effect in cooling and has value to generalize.
24. 这些碰撞加热这个再生区,其中的液体冷却剂,如熔盐,会把热从反应堆中导出。
These collisions heat the blanket, and a liquid coolant such as molten salt draws that heat out of the reactor.
25. 在此基础上,重点解决了油罐区泡沫灭火系统设计和油罐区喷淋冷却系统设计。
On this basis, the key completed tank foam fire extinguishing system design and area oil spray cooling system design area.
26. 回 水区的水经水泵进入冷却塔冷却后进入混合区;
The water in the backwater zone enters the cooling tower and then enters the dilution zone through the water pump.
27. 最后,对传统的理想冷却曲线及低温区的冷速问题提出了一些新的看法。
Finally, some new viewpoints with respect to the conventional ideal cooling curve and cooling velocity below the martensitic transformatio…
28. 最后,对传统的理想冷却曲线及低温区的冷速问题提出了一些新的看法。
Finally, some new viewpoints with respect to the conventional ideal cooling curve and cooling velocity below the martensitic t...
29. 最后,对传统的理想冷却曲线及低温区的冷速问题提出了一些新的看法。
Finally, some new viewpoints with respect to the conventional ideal cooling curve and cooling velocity below the martensitic t...
版权声明:问题易所有作品(图文、音视频)均来源网络,版权归原创作者所有,与本站立场无关,如不慎侵犯了你的权益,请联系我们告知,我们将做删除处理!
