
词语导航
基本信息
词语:工作选择电路
繁体:工作選擇電路
拼音:gōng zuò xuǎn zé diàn lù
英语翻译
【计】 function selector circuit
分词翻译
工作的英语翻译:
job; work; employment; labour; pursuit; task
【医】 ergo-
【经】 job; operations; task
选择电路的英语翻译:
【计】 select circuit; selective circuit
翻译例句
1. 本文介绍了MAX4624模拟开关的基本特性,给出了利用模拟开关降低继电器功耗的设计电路,并说明了其工作原理及元器件的选择方法。
This paper introduces the characteristic of analogue switch MAX4624. gives the designing circuit of cutting down relay"s power loss, it "s work principle and the methods of selecting components.
2. 具体介绍几种电路结构形式,并分析它们的工作原理、影响精度的主要因素以及有关集成电路芯片的选择。WWw.wEntIYi.COm
It introduces some forms of circuits and analyses their working principles, effecting accuracy factors, and how to choose integrated circuit chips.
3. 详细介绍了传感器的结构、工作原理、工作模式的选择以及信号检测电路。
Details of the sensor"s structure, its working principle, the selection of working mode as well as the signal processing circuit is presented.
4. 详细介绍RTD - DJ型全电子汽车灯光检测器的工作原理、电路设计、各部件的选择和性能参数。
The working principle, circuit design of RTD-DJ entirely electronic automotive light detector are introduced here with the performance parameters of its components.
5. 在电路设计工作中,很大一部分工作是在验证熔断器与线型选择是否合理、是否匹配。
Most of the work in circuitry design is verifying whether the selection of fuse and wire is reasonable and matching.
6. 本机工作在UHF频率,采用PLL锁相环电路,预设256个可选择使用频率。
This system works on UHF frequency brand, use PLL circuit. There are 256 frequencies for your option.
7. 硬件设计部分给出了主要元器件的工作原理,硬件设计思路,各部分电路图,主要元器件的型号选择及数值计算。
Principle of main component, design thought, circuit diagram of every part, model choice and numerical value count of main component is presented in hardware design part.
8. 详细介绍了机械部分工作原理、传感器的选择、测试系统硬件电路的设计过程、下位机软件设计和上位机软件设计。
The work principle of the mechanical part, the choosing of the sensor, the design the measurement circuit and the design of soft wares are introduced in detail in this paper.
9. 对于开关补偿电源的主电路部分,特别是变压器设计、PWM控制芯片选择、以及工作原理进行了详细的阐述。
As for the main part of switching power, in particular, more detail in the transformer design, PWM controller selection, and working theory.
10. 详细地分析了其电路工作原理和参数的选择方法,并给出了实验结果。
The theory of circuit and how to select circuit parameter are analyzed in detail and the experiment result is given.
11. 电路采用了预启动和衬底电位选择结构,并利用三相时钟信号方式控制电荷泵的工作状态。
The latest three-phase clock signal control method was used to control the working state of charge pump.
12. 本文提出了各种电路拓扑结构,并分析优缺点,选择了基于电压源型逆变器的扰动发生装置的拓扑结构与工作原理。
In this paper, various circuits are proposed, and the characters of which are made clear, as the conclusion, the Interruption Generator based on the voltage source inverter (VSI) is selected.
13. 对所设计的抑制电磁干扰电路的工作原理、特点和电气参数选择等进行了研究,给出了相应电气元件参数选择的计算方法。
The working principle, characteristics and electric parameter selection of the restraint EMI circuit are studied in this paper. The computing methods of electric component parameters are given.
14. 本文针对微型电动汽车,在比较多种常用的直流斩波电路基础上,选择三重化桥式斩波电路作为功率变换器主电路并研究了其工作原理。
Compared with a variety of relatively common DC chopping circuit, this paper selects the triple H-bridge chopping circuit to drive DC motors and introduces its working principles.
15. 本文针对混合型有源电力滤波器的电路拓扑,介绍了无源注入支路的基本工作原理,重点阐述了如何选择注入支路的调谐频率。
In view of the topology of the hybrid active power filter with injection circuit, analysis its principle in detail, as well as choice the desirable resonance frequency.
16. 本文针对混合型有源电力滤波器的电路拓扑,介绍了无源注入支路的基本工作原理,重点阐述了如何选择注入支路的调谐频率。
In view of the topology of the hybrid active power filter with injection circuit, analysis its principle in detail, as well as choice the desirable resonance frequency.
版权声明:问题易所有作品(图文、音视频)均来源网络,版权归原创作者所有,与本站立场无关,如不慎侵犯了你的权益,请联系我们告知,我们将做删除处理!
