热处理状态用英语怎么说,热处理状态的英文翻译


词语导航

基本信息

词语:热处理状态

繁体:熱處理狀態

拼音:rè chǔ lǐ zhuàng tài

英语翻译

【机】 as-heat-treated

分词翻译

热处理的英语翻译:

heat treatment
【化】 heat treating; heat treatment; thermal treatment

状态的英语翻译:

state; condition; fettle; position; predicament; status
【计】 behaviour; S; ST; state; status; transient regime
【医】 asiminine asis; condition; etat; sirupus ferri jodati; state; status
【经】 state

翻译例句

1. 钢管以热处理状态交货。

Heat treatment baja menyatakan pengiriman.

2. 同时研究了焊接工艺参数、热处理状态对接头性能的影响。

The effect of welding parameters and artificial aging on the overlap joints were investigated.

3. 可以在收货状态或热处理状态下对轻质合金薄板进行成形操作。

You can form light-alloy sheet in either its as received condition or heat treated condition.

4. 有些热损伤相当严重,以至于临近区域材料的热处理状态被改变。

Some heat damage is so severe that the heat-treat condition of material is altered in adjacent areas.

5. 对于同一种热处理状态的焊缝,焊缝区的硬度取决于不同的焊丝。

As for welding seams of the same heat treatment state, the hardness of welding seam area depends on different welding wires.

6. 在相同变形次数下,T6热处理状态比t 5热处理状态晶粒大,但硬度高。

With the same deforming times, the grains are bigger in T6 conditions than those in T5, but the hardness is higher.

7. 对比试块应从与待检材料有相同的公称外径、材质和热处理状态的棒或管上制取。

The reference standard, of convenient length, shall be prepared from a length of bar or tube of the same nominal outside diameter, material and heat-treatment as the material examined.

8. 结果表明,不同热处理状态的镀层在热疲劳过程中行为相同,但热度劳寿命不同。

The results show that the plating conditions are the same during the thermal fatigue processes, but the thermal fatigue lives are different.

9. 用金属磁记忆检测技术,对不同热处理状态下焊接件的磁场强度进行了检测和分析。

The magnetic density of weldments was detected and analyzed in different heat treatment conditions by metal magnetic memory technology.

10. 测试了高导电铬铜合金在各种热处理状态的导电率、硬度和力学性能,并分析了性能变化及金相组织。

The electrical conductivity, hardness and mechanical properties of Cr Cu alloy in various heat treatment states are tested and its properties and microstructure variations are analyzed.

11. 采用X射线衍射、扫描电镜及显微硬度等技术,综合比较和分析了H13模具钢在不同热处理状态下经相同气体渗氮处理后表层的组织结构和硬度。

The microstructure and hardness of the layer of H13 tool steel gas-nitrided in different heat treatment conditions were studied by X-ray, SEM and micro-hardness test.

12. 金属热处理过程其实是一系列具体的操作,通过这些操作加热与冷却金属,但加热时进行控制,使得金属不达到熔融的状态。

The process of heat treating is the method by which metals are heated and cooled in a series of specific operations that never allow the metal to reach the molten state.

13. 热处理:用于使大多数合金钢产生期望的金相组织特性并把这些组织处于为机加工或者后道工艺最适宜的状态的一种工艺。

HEAT TREAT: Process used on most alloy steels to provide desired metallurgical properties and to put them in the most suitable condition for machining or other subsequent operations.

14. 后热处理可改善变形和表面应力状态、细化组织、提高硬度。

The post treatment can improve deformation and surface stress state, refine microstructure and increase hardness of cladding layer.wWw.WeNtiYi.com

15. 熔体过热处理的弛豫过程和引起的不可逆过程使熔体状态变化出现滞后效应,从而影响定向凝固界面形态稳定性。

The influences of hysteresis and relaxation of melt superheat on the morphological stability of interface in directional solidification were described.

16. 在定长状态下纤维的熔融吸热峰会发生很大变化,若在适当温度下进行热处理,可加速结晶形态的转化过程。

The melting peaks changed largely under fixed length state. Annialing fibers at a suitable temperature can accelerate the transition between the crystal morphologies.

17. 随着拉伸倍数提高,纤维经松弛状态下热处理后,其熔融峰数目由1个变为2个;而经部分张力和张力状态下热处理后,其熔融峰数目均由1个变为3个。

The number of melting peaks was increased from 1 to 2 with the increase of draw ratio after heat treatment under relaxation and from 1 to 3 after heat treatment under partial tension or full tension.

18. 研究了由三种热处理工艺获得的全贝氏体等温淬火球铁的机械性能、组织状态及切削加工性能和耐磨性能。

The mechanical properties, structures, cutability and wear-resistance of full-bainite ductile iron obtained by using three kinds of isothermal quenching processes were investigated.

19. 研究了由三种热处理工艺获得的全贝氏体等温淬火球铁的机械性能、组织状态及切削加工性能和耐磨性能。

The mechanical properties, structures, cutability and wear-resistance of full-bainite ductile iron obtained by using three kinds of isothermal quenching processes were investigated.

版权声明:问题易所有作品(图文、音视频)均来源网络,版权归原创作者所有,与本站立场无关,如不慎侵犯了你的权益,请联系我们告知,我们将做删除处理!