焊接容器用英语怎么说,焊接容器的英文翻译


词语导航

基本信息

词语:焊接容器

繁体:焊接容器

拼音:hàn jiē róng qì

英语翻译

【化】 welded vessel

分词翻译

焊接的英语翻译:

seal; solder; weld
【医】 solder; soldering

容器的英语翻译:

can; container; pocket; receptacle; recipient; vessel
【计】 outer casing
【化】 container
【医】 container; receptacle; receptaculum
【经】 container

翻译例句

1. 容器的制造、试验和验收均按机械部钢制焊接容器技术条件执行。

The manufacture, test and check & acceptance for these vessels are performed according to the technical terms for the steel welding vessels issued by the Ministry of Machinery.WwW.wENTIYi.cOm

2. 这种在一定的温度和压力条件下使用的容器必须满足强度和密封性的要求,而焊接容器能充分满足这些要求。

The container used at specified temperature and pressure condition has to meet the requirements of intensity and airtightness, while weld container can completely meet these requirements.

3. 作为规定,容器应用熔接弧焊工艺进行焊接。

As a rule, vessels shall be welded by fusion arc process.

4. 切割或焊接空容器可能由于残留物质而导致火灾、爆炸或有毒烟雾。

Cutting or welding of empty containers might cause fire, explosion or toxic fumes from residues.

5. 它还包括应用于桥梁、管道、压力容器、汽车制造、造船以及焊接钢种等钢材。

It also includes application steels for Bridges, pipes, pressure vessels, automotive manufacturing, shipbuilding and welding steel grades.

6. 安装和焊接金属部件或部分在一起,用于制造锅炉,容器,储罐,热交换器,管道和其他重金属产品。

Fit and weld metal parts or sections together to fabricate boilers, vessels, tanks, heat exchangers, piping and other heavy-metal products.

7. 至少5年焊接工程师工作经历,压力容器行业者优先考虑。

At least 5 years welding engineer working experience, pressure vessel industry is preferred.

8. 为了保证压力容器的使用安全,必须检测焊接棱角度和错边量。

In order to ensure the use safety of pressure container, we must test the welded joint angularity and stagger joint.

9. 钢制容器人孔的焊接应力及塌陷变形,直接影响容器的焊接质量和使用寿命。

The notch welding stress and the collapse-deformation of steel container directly affects the welding quality and service life of the container.

10. 直接焊接到压力保持部件上的外部配件及容器支架的材料应与压力部件相同。

Materials for external attachments and vessel support welded directly to the pressure retaining parts shall be similar material as the pressure parts.

11. 焊接盛装过易燃、可燃液体的容器、管道时,违反操作规程,能引起爆炸。

Also the explosion will be occurred due to disobey the operational rule and welding the containers or pipes that used to be filled with flammable liquid.

12. 焊接后的电容器不应受到任何已焊接p C板或其他元器件热辐射的影响。

The capacitors shall not be effected by any radiated heat from the soldered PC board or other components after soldering.

13. 锅炉及压力容器除了焊接引起的裂纹外,还存在着由腐蚀性环境而引起的腐蚀开裂。

In addition to cracks resulting from welding in boiler and pressure vessels, there are also corrosion cracks due to corrosive environment.

14. 不要让任何物品接触焊接后的电容器。

Please do not allow anything to touch the capacitor after soldering.

15. 本文介绍了“压力容器焊接工艺评定计算机管理软件”的主要功能及特点。

The article introduce main function and characteristic of welding procedure qualification for steel pressure vessels computer management software.

16. 基于商品化软件“压力容器焊接专家系统”的开发经验,本文从系统实现角度提出专家系统的设计方法。

Based on the development of commercialized software, welding expert system in pressure vessel, this paper proposes designing method of expert system.

17. 通过计算实例,给出了压力容器设计中常见的焊接密封垫片连接结构的平盖设计的一种方法。

With the example, one method for designing flat cover with welded gasket commonly met in pressure vessel design was presented.

18. 介绍了一种大型宇航容器环向焊缝适应控制TIG自动焊接系统的设计方案。

The adaptable control TIG automatic welding system for large-size astronautics container circumferential was introduced in this paper.

19. 锅炉及压力容器等重要结构的焊接,要求接头完全连接。

For such critical structures as boilers and pressure containers, complete welding joint is required.

20. 研究了诸如化学成分、热处理条件和焊接因素对压力容器脆性破坏的影响。

The influences of basic metal chemical composition, heat treatment conditions and welding parameters on the pressure vessel brittle fracture have been investigated.

21. 冷弯试验是钛容器制造中对铁板和焊接接头的必保检验项目。

The bending test is the necessary inspection item of titanium plate and welding joint for the manufacture of titanium vessel.

22. 该软件适用于钢制压力容器焊接工艺评定的各项管理工作。

This software applies to manage welding procedure qualification for steel pressure vessels.

23. 文中附有多层包扎容器焊接接头和混合式换热器结构等示意图。

The welding joints of multilayer vessel and the diagrammatic sketch of the hybrid heat exchanger are attached in the paper.

24. 钢衬塑运输槽罐的钢体部分的制作,按照JB/T4735-1997《钢制焊接常压容器》标准。

Transport steel tanks lined with plastic body parts of the steel production, in accordance with the JB/T4735-1997 "welded steel pressure vessel" standard.

25. 扩散氢含量低,低温冲击性能优异,适用于低温钢、中碳钢等压力容器的焊接。

It has low diffusible hydrogen and good low-temperature impact toughness, suitable for welding middle-carbon steel and pressure containers of low-temperature steel.

26. 具有优良的塑性、韧性和抗裂性能,焊接压力容器、船舶、海洋工程等重要结构。

It has excellent mould, toughness and crack resistance, use for welding key structure, such as pressure containers, ships and ocean projects, etc.

27. 具有优良的塑性、韧性和抗裂性能,焊接压力容器、船舶、海洋工程等重要结构。

It has excellent mould, toughness and crack resistance, use for welding key structure, such as pressure containers, ships and ocean projects, etc.

版权声明:问题易所有作品(图文、音视频)均来源网络,版权归原创作者所有,与本站立场无关,如不慎侵犯了你的权益,请联系我们告知,我们将做删除处理!