
词语导航
基本信息
词语:许用应力
繁体:許用應力
拼音:xǔ yòng yīng lì
英语翻译
【化】 allowable stress
相关词条
1.permissiblestress分词翻译
许的英语翻译:
allow; perhaps; praise; promise用的英语翻译:
apply; expenses; use【医】 c.; cum; Utend.
应力的英语翻译:
stress【化】 stress
【医】 stress
翻译例句
1. 设计要求、强度设计值可转换为许用应力设计值。
Strength Design values may be converted to Allowable Stress Design values.
2. 对笼材料的疲劳强度作了试验。并做出许用应力极限的讨论。
The fatigue strength test of the cage material has been done and the limits for use are discussed.
3. 要对管道元件进行强度计算,首先就要确定管道材料的许用应力。
If the strength calculation of piping components is to be made, the allowable stresses of the piping materials shall be determined fist.
4. 提出的设计数据如安全系数、许用应力均根据生产实践的应用所确定。
Some datum, for example safety factor and allowable stress are put forward based on production practice.
5. 推导了疲劳许用应力范围计算公式和不同概率水平下疲劳应力的转换关系。
The permissible stress range formula and transfer factor of fatigue stress range were deduced.
6. 对不同算法得到不同结果的原因进行探讨,提出算法和许用应力值的取用建议。
The reason of different results from different formulae is discussed, and adoption for the suitable formula and allowance stress is suggested in the paper.
7. 而管道许用应力是在确定了管道材料的基本许用应力后,乘以质量系数所得的值。
The allowable stress is the value of the determined basic allowable stress of the piping material multiplied by a quality factor.
8. 管子材料的许用应力可按GB 50316《工业金属管道设计规范》中的数据选用。www.wENtiyi.COM
The allowable stress of the pipe material shall be chosen from the data of GB 50316 Design Specification for Industrial Metal Piping.
9. 滚子活齿传动设计中,在工作应力、许用应力的设计参数和影响因素中存在着许多不确定性。
The many indefinite exists in the design parameters and influence factors of the working stress and allowable stress of the roller movable teeth drive.
10. 对按扭矩估算轴径和按弯扭合成力矩计算转轴轴径公式中的许用应力进行了分析,给出了修正意见。
This paper analyzes the admissible stresses used to calculate the diamter of axles according to torsional stress and resultant stress, and some suggestions are given.
11. 我们采用许用应力法设计,后计算变形,再用垫尖起拱抵消浇筑变形,并配套有效地控制裂缝的浇筑方法。
It is suggested that the load form should be designed by using permissible stress method and the calculation of deformation is carried out in this paper.
12. 主要结论:所选材料的许用应力大于通过该种方式计算得到的该防浪板的最大应力的3.5倍时,该防浪板是安全的。
Main conclusions: the wave-proof plate is safe when the permissible stress of the selected material is greater than the maximum calculated stress"s 3.5 times of it.
13. 结果表明,驱动桥壳空心梁和半轴套管部分的应力远小于材料的许用应力,而悬架支座与桥壳连接处出现了局部应力过大的情况。
The results show that stress in hollow beam and semi-shaft bush is much less than permissible stress, while joint of suspension frame and axle housing has too large local stress.
14. 通过计算证明引起断裂的根本原因是动应力超过了梁的许用疲劳极限,另一原因是梁的结构不合理。
The primary cause of breakage is that the dynamic stress exceeded the allowable fatigue limit of the beam, and another cause is that the structure of the beam is unreasonable.
15. 轴按许用弯曲应力计算法校核轴径。
Axis press allowable bending stress calculation method trunnion check.
16. 叙述了滚动球窝喷管在设计中许用接触应力的选择依据及方法,并根据以往的经验公式及其试验数据对影响许用接触应力的几个因素进行了分析。
Selection basis and method on allowable contact stress of rolling ball-socket nozzle were described. Based on empirical formula and test data, several factors affecting allowable stress were analyzed.
17. 主梁下挠变形的主要原因是受热引起的最大复合应力超过许用值,达到了屈服极限值,强度不满足要求。
The main reason of the main beam down deflection was that the most complex stress exceeded the admissible value and achieved the yield limit value.
18. 以公式化的形式给出了许用剪应力的更合理的数值。
Reasonable date and equations for allowable shearing stress are proposed.
19. 以公式化的形式给出了许用剪应力的更合理的数值。
Reasonable date and equations for allowable shearing stress are proposed.
版权声明:问题易所有作品(图文、音视频)均来源网络,版权归原创作者所有,与本站立场无关,如不慎侵犯了你的权益,请联系我们告知,我们将做删除处理!
