旋阀用英语怎么说，旋阀的英文翻译

词语导航

基本信息

词语：旋阀

繁体：旋閥

拼音：xuán fá

英语翻译

【化】 stopcock

分词翻译

旋的英语翻译：

screw; spin; whirl; come back; lathe; return; revolve; soon
【医】 administer; spin

阀的英语翻译：

clique; valve
【化】 valve
【医】 limen; limina; valve

翻译例句

1. 旋阀机构是保证中速柴油机进、气阀正常工作的重要装置。

Valve rotator is an important device to ensure the normal operation of the inlet and exhaust valves of a medium speed diesel engine.

2. 清洗：检查或更换磨损的阀瓣，断开控制管道的连接，采用钝工具和锤子敲击阀帽上的接片，然后旋松阀帽螺纹。

To Clean: Inspect or replace worn valve disc, disconnect control pipe and unscrew bonnet from valve body using blunt tool and hammer on bonnet lugs.

3. 旋筒阀已经解决了传统的调节阀所遇到的一些问题，而且部分已超出了传统调节阀的性能。

Rotor type valve has solved some of the problems encountered by the traditional control valve, and the part has been beyond the traditional control valve performance.

4. 上阀杆通过丝口旋在横膈膜止动螺母里。

The upper stem is threaded into the diaphragm retainer nut.

5. 尼伯科旋启式止回阀可配置外部操纵杆和压铁。操纵杆和压铁用于对阀瓣进行外部控制。

NIBCO swing check valves are available with an outside lever and weight. The lever and weight arrangement is used to maintain exterior control over disc movement.

6. 根据不同工况，旋筒阀选用不同的控制元件，可以分类如下。

According to different working conditions, rotary cylinder valve selection of different control components, can be classified as follows.

7. 旋下排液阀的盖子。如使用弯管，请将其套在阀门放料口的外螺纹上，并用手拧紧；

Remove sealing cap from the discharge valve. When using discharge tube, please?screw it onto the outlet of valve, and tighten it.

8. 要更换安全阀阀瓣，握住上部引导翼，旋下隔膜压力板上的螺丝。

To replace the relief valve disc, hold the upper guide fin and unscrew the diaphragm pressure plate.

9. 不旋转阀杆采用无旋流阀瓣，确保减少扭矩，防止填料受到扭转损坏。

Non rotating stem allows a non-spinning disc, ensures low torque and prevents torsional damage of the packing.

10. 介绍了设置于合流制截流井中的一种新产品——旋流限流阀。

A new product, rotational flow-limiting valve installed in combined sewage intercepting chamber was introduced.

11. 旋松阀帽中间的内六角螺丝，并且提起阀帽，正好足够拿走旧阀膜。Www.WeNtiYi.cOm

Unscrew the Allen screw in the middle of valve cap and lift up the cap just enough to pick up the old diaphragm.

12. 可见流体在针阀与喷嘴出口间隙大的时候其内部旋流强度大。

Fluid can produce strongest internal swirl when the needle is far from the nozzle exit.

13. 利用阀控泵-马达同步系统可以保证旋压机两个旋轮的同步精度，以保证旋件的质量。

The synchro accuracy of two spinning wheels of spin forming machine can he obtained by using the synchro system of valve controlled pump-motor, therefore the quality of workpiece is ensured.

14. 利用阀控泵-马达同步系统可以保证旋压机两个旋轮的同步精度，以保证旋件的质量。

The synchro accuracy of two spinning wheels of spin forming machine can he obtained by using the synchro system of valve controlled pump-motor, therefore the quality of workpiece is ensured.