词语导航
基本信息
词语：乳胶粒
繁体：乳膠粒
拼音：rǔ jiāo lì
英语翻译
【化】 emulsoid particle
分词翻译
乳胶的英语翻译：
【化】 emulsoid
粒的英语翻译：
grain; granule
【医】 grain; granula; granulatio; granulation; granulationes; granule; granum
翻译例句
1. 通过TEM分别观察乳胶粒的形态。
The morphology of latex particle is determined by use of TEM.
2. 超声波输出功率对乳胶粒径影响不大。
Ultrasonic power output had little effect on the diameter of the latex.
3. 利用动态激光光散射仪测定乳胶粒子的粒径及粒径分布。
And the latices diameter and distributions were determined by High Performance Particle Size HPPS hpp5001 dynamic laser scatter instrument.
4. 电子透射电镜观察显示纳米ATO粒子存在于杂化乳胶粒子内。
Transmission electron microscopy shows that nano-ATO particles exist in hybrid latex particles.
5. 结果表明，复合乳胶粒子的形成过程与假设的演化模型基本吻合。
The result showed that the development of composite latex was mostly in agreement with the assumed evolution pattern.
6. TEM显示，复合乳胶粒子形态均匀规整，并呈现明显的核壳结构。
TEM showed uniform structured composite latex particle morphology and obvious core-shell structure.
7. 认为普通硬球型乳胶粒子体系的致粘机理与聚合物链段的亲水性有关。
The viscosity mechanism of a common hard-sphere latex particle system is considered to be related to the hydrophilicity of the polymer chain.
8. 以红外光谱、透射电子显微镜表征水解反应、交联反应及乳胶粒结构形态。
The hydrolytic reaction, crosslinking reaction and latex particle structural morphology were characterized by IR and TEM.
9. 与一次加料法相比，采用单体滴加法时乳胶粒的粒径更小，粒径分布更窄；
Compared with one time addition, the particle size of latex by monomer dropping was narrow;
10. 这一反应还伴随着羧基的迁移以及乳胶粒膨润、 溶胀和压缩的形态变化过程。
In the meanwhile, the various. morphology of the latex and the migration of the carboxyl group are also discussed.
11. 通过乳胶粒粒度分析及引发聚合速率的测定，探讨了微皂乳液聚合的成核机理。
The nucleation mechanism of the emulsifier-minor latex particles was discussed by measuring the particle size and the polymerization rate for the seeded stage.
12. 用动态激光光散射法测定了丁二烯-苯乙烯乳液聚合的乳胶粒子的粒径及其分布。
The latex particles size and size distribution in emulsion copolymerization process of butadiene-styrene were determined by dynamic laser scattering.
13. 在酸性介质中，含羧基乳胶粒子体系的致粘机理与普通硬球型乳胶粒子体系一致。
In the acid medium, the viscosity mechanism of the system of latex particles containing carboxyl is the same with that of the common hard sphere latex system.
14. 乳胶粒径随壳单体用量的增加而增加，而壳单体的加入方式对乳胶粒径影响较小。
The particle diameter in-creased with increasing in the amount of shell monomer. Effect of c...
15. 同时依据实验数据，得到了不同粒径聚甲基丙烯酸甲酯乳胶粒子体系的零切粘度值。
And according to data of rheological experiments, zero shear viscosity of latex systems of polymethylmethacrylate in different particle diameters was obtained.
16. 较高的核玻璃化温度则有利于形成明显的核壳结构乳胶粒子，且有助于漆膜硬度的提高。
The latex with higher core T_g has more obvious core-shell structure, and the pencil hardness of the film is higher.
17. 考察各种因素对聚合反应及乳胶粒性质的影响发现：大分子引发剂对聚合反应有较大的影响。
The studies of the effects of all kinds of factors on the controllability of polymerization and the properties of emulsion showed that macroinitiators had great effects on the polymerization.
18. 其反应历程与常规乳液聚合的相似之处是，都经历了乳胶粒子的成核、增长和聚合完成阶段。
The process of graft copolymerization was similar to that of classical emulsion polymerization, which can be divided into three stages: nucleation, growth, and polymerization finish.
19. 本文研究的主要内容为以渗透溶涨法制备中空乳胶粒子，并研究其在电泳显示方面的应用性能。
The preparation in osmotic swelling and the application performances of hollow latex particle in electrophoretic display ware mainly discussed in this study.
20. 利用TEM对PB-g-PS乳胶粒子进行了形态观察，接枝物为球形粒子，且具有核壳结构。
The study showed that PB-gPS latex particle is ball-like, and has a core-shell shaped structure.
21. 采用FT - IR、粒径分析等方法对共聚物的组成、乳胶粒子的尺寸及分布进行了分析表征。
The composition of copolymer and emulsion particle size and distribution are characterized by use of FTIR and particle size analyzer.
22. 探讨了乳化剂种类和用量、聚合温度及加料方式对乳胶粒大小、胶乳稳定性和胶膜耐水性的影响。
Effects of emulsifier types and amounts, polymerization temperature and feed methods on particle size, stability of latex and water proofing property of films were investigated.
23. 乳胶漆的成膜需要乳胶粒子变形、分子链相互扩散和弯曲，以至相互缠绕，讨论了其成膜的驱动力。
Film forming of latex coatings needs latex article deformation and molecule chains dispersion, bending and entangling mutually and driving force to form film.
24. 系统研究了复合乳化剂配比及用量、聚合温度、聚合方式和官能团单体含量对共聚物乳胶粒径及其分布的影响。
Influence of compound emulsifier"s ratio and amount, reaction temperature, polymerization types and functional monomer amount on the emulsion resin particle size and its distribution were studied.
25. 同时，用电导滴定法测定了乳胶粒表面羧基的含量，探讨了乳化剂浓度、羧酸含量及内相比对羧基分布的影响。
The distribution of carboxylic group were determined by conductance titration and affected by the concentration of surfactant, the volume fraction and the amount of methyl acrylic acid.wWW.wENTIyi.COM
26. 用FT - IR、TEM和纸张物理性能检测的手段对聚合物结构、乳胶粒子形态以及应用性能进行了表征。
FT-IR, TEM and other paper testing equipment respectively characterized the structure, the particle morphology of the resultant dispersions and the ph.
27. 用FT - IR、TEM和纸张物理性能检测的手段对聚合物结构、乳胶粒子形态以及应用性能进行了表征。
FT-IR, TEM and other paper testing equipment respectively characterized the structure, the particle morphology of the resultant dispersions and the physical properties of the sized paper.
28. 指出了单体在保护胶体上的适量接枝是乳胶粒稳定的必要条件，因此，合理使用保护胶体在乳液聚合中有重要意义。
It was pointed out that proper grafting of monomer onto protective colloid was vital to stability of colloid particle. So it is important to properly use protective colloid in emulsion polymerization.
29. 指出了单体在保护胶体上的适量接枝是乳胶粒稳定的必要条件，因此，合理使用保护胶体在乳液聚合中有重要意义。
It was pointed out that proper grafting of monomer onto protective colloid was vital to stability of colloid particle. So it is important to properly use protective colloid in emulsion polymerization.
版权声明：问题易所有作品（图文、音视频）均来源网络，版权归原创作者所有，与本站立场无关，如不慎侵犯了你的权益，请联系我们告知，我们将做删除处理！