
词语导航
基本信息
词语:弯曲模型
繁体:彎曲模型
拼音:wān qū mó xíng
英语翻译
【机】 bending die
分词翻译
弯曲的英语翻译:
bend; crook; curl; curve; incurve; inflect; swerve; wind
【计】 baw; bawing; inflexion
【化】 bending
【医】 anacampsis; anchylo-; ancylo-; anfractuosity; ankyla; ankylo-
arcuation; dilaceration; gryposis; incurvation; rhaebosis; rhebosis
scolio-
模型的英语翻译:
former; matrix; model; mould; pattern
【计】 Cook-Torrance model; GT model GT; MOD; model; mosel
【医】 cast; model; mold; mould; pattern; phantom
【经】 matrices; matrix; model; pattern
翻译例句
1. 根据悬臂梁模型,建立头发的弯曲模型; 运用外力控制头发的弯曲;
This paper, establishes a hair bend model according to the cantilever beam model in which the hair bend is controlled by force.
2. 本文根据树木的物理属性,建立枝条弯曲模型,实现枝条弯曲形态的生成算法。
In this paper, the physical attributes of trees are considered to build the(branch"s) bending model and it realizes the synthesis algorithm for the shape of bended branch.
3. 建立了弯曲关节的静态模型,并通过实验论证了该模型的合理性。
We establish the static model of the bending joint and prove the rationality of the model by the experiment.
4. 建立了考虑转子转速的新的碰磨力模型,分析了具有初始弯曲和刚度不对称转子系统的碰磨响应,得到了系统参数对系统分叉和混沌响应的影响。
A new model of rub impact force considering varied rotating speed was derived and the rub impact response of a rotor system with initial bending and asymmetric stiffness was analyzed.
5. 当冷空气流经热板模型时,附面层内的干涉条纹发生弯曲。
As soon as the cold air flows along a hot plate model, the interferometric fringes bend inside the boundary layer.
6. 进行了纵筋加强箱形薄壁梁模型的循环弯曲试验。
Cyclic bending tests of a box girder with longitudinal stiffeners were also carried out.
7. 提出了V型电热硅微致动器的弯曲振动力学模型。
A flexural oscillation model about V-shaped silicon electro-thermal micro actuator is presented.
8. 而在采矿工程中,相似材料模拟的往往是层状模型,岩层的弯曲变形和断裂破坏是关键问题。
In mining engineering, strata models are often simulated by similar material simulation model, rock bending deformation and fracture damage is the serious problem.
9. 本文采用柱坐标,以椭圆—阿基米德螺线包络组成解析曲线椭圆柱体的弯曲原木的数学模型。
The mathematical model of bending logs of curved elliptical cylinder is analysed with the elliptical-archimedes spiral envelope in cylindric coordinate.
10. 本文主要对双圆弧齿轮传动的载荷分配、静念啮合和动念啮合的接触及弯曲应力的分析模型和计算方法做了研究和探讨。
This paper primarily represents the study and discussion about computing methods and modeling of load share of contact stress and bending stress of static mesh and dynamic mesh of DCAHG.
11. 在此之前,并未见到针对柔性结构建立多变量辨识模型,对弯曲和扭转模态都进行抑制的实际应用的例子。
Erenow, it has not been found that the application was reported in which the multivariable model was identified and both bending and torsional modes were depressed.
12. 由于考虑了纵向过渡段塑性弯曲的影响,作者提出的模型较以往的环模型更加符合实际。
The model conforms better tol the practice than the ring models due to considering the effect of the plastic bending of the longitudinal transition zone.
13. 这个模型除考虑竖杆的弯曲和剪切变形外,还考虑了轴向变形。
In this model, besides considering bending and shear deformation, the axial deformation of columns has also been taken into account.
14. 建立了流体压强与弯曲角之间的静态模型。
Establishes the static model between the fluid pressure and the bending angular degree.
15. 用建立的模型分析了多次扫描过程中随扫描次数增加弯曲增量逐渐减小的原因。
The reasons that the bending angle decrease with the number of irradiation are analyzed by using the built model.
16. 通过力学和高等数学建立了磨具弯曲成形的数学模型,并推导出磨具的宽度函数表达式。
The mathematical model of bending formation lapping tools was established through mechanics and higher mathematics, and the width function expression of the lapping tools was deduced.
17. 数字模型应用创建了重复的对角交叉杆件模型,形成折叠成三列的弯曲的树冠形状。WWw.wenTiYI.COm
Digital modelling was used to create a repeating pattern of diagonally intersecting poles, forming the curving canopy shape that folds down into three columns.
18. 纤维模型梁柱单元是目前处理空间杆系双向弯曲与变轴力耦合问题最为实用有效的单元分析模型。
Fiber model beam-column elements are presently one of the most practical and efficient element models handling biaxial bending and variable axial force coupling problems of frame structures.
19. 分析了大型多支承变刚度回转窑的力学特征,建立了回转窑轴线弯曲时各托轮受力的力学模型。
The mechanical character of large-scale variable-stiffness rotary kiln under multi-supporting system is analyzed, the mechanical model is set up when the axes is bending.
20. 模型(7)适合估计毛细度、毛弯曲分、毛密度分和毛油汗分。
Model (7) was fit to estimate wool fineness, wool bend score, wool density score and wool oil score.
21. 这在线性空间中是很好用,但是在弯曲立面中,用同样的方法,用的是更小的草模型。
This worked well in linear spaces. But along the curved facade I used the same method with smaller grassmodels.
22. 本文提出平行气流中附壁射流弯曲变形的简化计算模型。
In this paper, a simplified calculation model has been proposed for analyzing the effecting of bending deformation of jet attachment in parallel flows.
23. 在开始制作的这个模型前,我从苹果树上收集了许多弯曲的木料。
Before starting construction of this model I collected many compass timbers from Aplle wood.
24. 基于动能密度和弯曲弹簧模型,提出了裂纹梁损伤识别两步法。
A two-step damage identification method of cracked beams is proposed based on the kinetic energy density and the bending spring model.
25. 然后结合管道理论研究得出了带有弯曲管路、异径串联连接管路的蓄能器数学模型。
Then combined pipe-line theory, the accumulator"s integrated mathematical model with incurvate and strange diameter series connection pipeline is built.
26. 用来描绘木材弯曲蠕变的粘弹性模型都是由一个马克思维尔体和两个开尔文体所组成的六元件模型。
The viscoelasticity model used to describe the bending creep of wood is a six element model composed of one maxwell and two kelvin systems.
27. 为解决产层套管的弯曲问题,通过建立压实、出砂引起的弯曲套管的力学模型,来解释部分层段产生相对滑动以及弯曲的机理。
To solve the problem, this paper establishes a mechanical model of casing bend to explain the relative slipping and casing bend mechanism for some layer segments.
28. 为解决产层套管的弯曲问题,通过建立压实、出砂引起的弯曲套管的力学模型,来解释部分层段产生相对滑动以及弯曲的机理。
To solve the problem, this paper establishes a mechanical model of casing bend to explain the relative slipping and casing bend mechanism for some layer segments.
版权声明:问题易所有作品(图文、音视频)均来源网络,版权归原创作者所有,与本站立场无关,如不慎侵犯了你的权益,请联系我们告知,我们将做删除处理!
