四氟用英语怎么说,四氟的英文翻译


词语导航

基本信息

词语:四氟

繁体:四氟

拼音:sì fú

英语翻译

【建】 tetrafluorohydrazine

分词翻译

四的英语翻译:

four
【医】 quadri-; Quat; quattuor; tetra-

氟的英语翻译:

fluorine
【化】 fluorine
【医】 F.; fluorine

翻译例句

1. 本文描述了用毛细管气相色谱对0.8%四氟菊酯驱蚊药液的定量分析方法。

This paper describes a capillary column gas chromatography method for quantitative analysis of an 0.8 % solution of transfluthrin repellent.

2. 材质:是以四氟纤维,丝编织成型。

Material:It"s made by the knitting of fluorine fiber and thread.

3. 简介氟树脂的种类和聚四氟乙烯的发现经过。

Sorts of fluororesins and the discovery of polytetrafluoroethylene are introduced.

4. 新增了六氟丙烯回收系统和四氟乙烯回收系统等。WWw.wENtiyI.com

New addition of the C_3F_6 recycle unit and TFE recycle unit etc.

5. 特氟隆软管总成由接头组件、扣压外套、聚四氟乙烯软管组成。

Teflon hose assembly is consisted by joint assembly, press wrap and Teflon hose.

6. Parkool密封结构与聚四氟唇型密封共同构成水冷密封。

Parkool seal structure and ptfe lip seal constitute water seal.

7. 包含2,3,3,3-四氟丙烯和氟化氢的共沸物组合物及其用途。

Azeotrope compositions comprising 2,3,3,3-tetrafluoropropene and hydrogen fluoride and uses thereof.

8. 该产品广泛应用于增强塑料原料、聚四氟、密封材料、作填充用料。

This product widely applies in the reinforced plastics raw material, the polytetrafluoro, the packing material, makes the packing needed materials.

9. 因波纹管是四氟材料制作的,压力、压差大,容易导致波纹管破裂。

PTFE material for corrugated pipe is made, pressure, pressure large, easily lead to broken bellows.

10. 加入四正丁基四氟硼酸铵明显加快顺式芪的异构反应而减慢四环烷的反应。

Addition of n-Bu_4NBF_4 accelerated the isomerization of cis-stilbene dramatically but retarded the reaction of quadrieyolane.

11. 聚四氟乙烯垫片又分为:纯四氟垫片,膨胀四氟,增强四氟,填充四氟等。

PTFE gaskets divided into: pure PTFE gaskets, expanded PTFE gaskets, reinforcing PTFE gaskets, packing PTFE gaskets, etc.

12. 研究了以一种咪唑类离子液体1-乙基-3-甲基咪唑四氟硼酸盐(EMI。

The electrochemical properties of three new kinds of liquid electrolytes, 1-ethyl-3-methyl imidazolium tetrafluoroborate(EMI.

13. 根据介质性能及使用期,应经常检查阀体顶部四氟密封圈和孔板部的四氟薄片。

According to media performance and the use of period and should always check the valve orifice at the top of the Ministry of PTFE seals and PTFE sheet.

14. 准备碳钢、不锈钢、特材、衬四氟的焊接工艺文件,并和相关部门做技术交流。

Prepare for WPS for CS, Low-alloy Steel, SS, Special Metal and FPE products and communicate with related department for technical communication.

15. 用差示扫描量热仪与扭辨分析检出了四氟乙烯-六氟丙烯共聚物熔体中的转变。

The transition in the melt of FEP copolymer was detected by differential scanning calorimeter and torsional braid analysis techniques.

16. 在已知的塑料中,四氟具有最好的耐腐蚀性,不老化,油封低磨擦系数,耐磨擦。

It has the best chemical corrosion resistance among known plastics. Without being aging, lowest friction coefficient, wear resistance.

17. 目的合成喹诺酮类抗菌药中间体四氟邻苯二甲酸,并改进工艺,使之适用于工业化生产。

Objective To improve the synthesis of tetrafluorophthalic acid as an intermediate in preparing quinolone antibacterials.

18. 材质:与物料接触部位的材料可分为不锈钢、钛材、碳钢、衬橡胶、衬塑料、衬四氟等。

Material: the material of the section touching the separated materials can have kinds of stainless steel, titanium steel, carbon steel, line with rubber, line with plastic and others.

19. 抛射剂为三氯一氟甲烷、二氯二氟甲烷、二氯四氟乙烷、氮气和二氧化碳中的至少一种。

The propellent is at least one of trichlorofluoromethane, dichlorodifluoromethane, dichlorotetrafluoroethane, nitrogen and carbon dioxide.

20. 工艺:四氟加热管它是由普通加热管的外层加四氟套管,在接线端用塑料接线盒加工而成。

Technology: tetrafluoroethane by ordinary heating regardless of the heating of the outer casing and tetrafluoroethylene in the terminal plastic junction box is processed.

21. 它们是辐射环境中的聚四氟乙烯降解释放的氟离子与焊缝处气体离子和金属离子反应的化合物。

They are believed to be the compounds of gas and metal ions at brazing with F-from Teflon that is decomposed by radiation.

22. 荧光猝灭及激光闪光光解实验证明四正丁基四氟硼酸铵能促进电荷分离过程而生成离子自由基对。

Fluorescence quenching and flash photolysis experiment proved that n-Bu_4NBF_4 could cause the dissociation of the exciplex to form separated radical ions effectively.

23. 是一种由乙烯-四氟乙烯共聚物(ETFE)和三元氟橡胶(FKM)聚合而成的新型柔性氟材料。

The FTPV (Fluoro TPV) is a novel flexible fluoride material prepared through polymerization of ethylene-tetrafluoroethylene copolymer (ETFE) and ternary fluorine rubber (FKM).

24. 介绍了钢衬聚四氟乙烯设备的加工方法,设计中需要注意的问题,以及在湿氟、湿氯环境下的使用情况。

Manufacture methods, some attentive questions during design and use conditions of the multiplex equipment of carbon steel with PTFE liner are introduced.

25. 材质:与物料接触部位的材料可根据用户需要,分为碳钢、不锈钢、钛材、衬橡胶、衬塑料、衬四氟等。

Material: material contact with the material parts can be based on user needs, are divided into carbon steel, stainless steel, titanium, rubber lining, plastic lining, PTFE lining and so on.

26. 是指用于蒸汽系统、蒸汽管道,用来控制蒸汽的开关的电磁阀,采用硬密封或者四氟软密封,能耐高温。

Steam solenoid valve is used for steam system, steam piping, solenoid valve used to control the steam, the seal or PTFE soft seal, high temperature.

27. 采用离子色谱法同时测定合成药物中存在的四氟硼酸根、对甲基苯磺酸根、硫酸根、1,4-丁二磺酸根4种离子。

A new method of simultaneous separating and determining tetrafluoroborate, p-toluene sulphonic acid, sulfate radical and 1,4-Butanedisulfonie acid by ion chromatography was established.

28. 该产品以聚四氟已烯(PTFE)为主要原料,填充其它耐磨材料,经模具压制烧结而成,再按客户需要,加工成条料。

The product is based on PTFE and filled with other wear-resistant material, and then pressed and sintered in moulding. It can be processed to strips according to customers? Requirement.

29. 所述方法具有以下步骤:在催化剂存在下,在足以实现脱氟化氢的条件下使3-氯 -1,1,1,3-四氟丙烷脱氟化氢。

The process comprises the following steps: dehydrofluorinating 3-chloro-1,1,1,3-tetrafluoropropane under conditions sufficient to effect dehydrofluorination in the presence of a catalyst.

30. 所述方法具有以下步骤:在催化剂存在下,在足以实现脱氟化氢的条件下使3-氯 -1,1,1,3-四氟丙烷脱氟化氢。

The process comprises the following steps: dehydrofluorinating 3-chloro-1,1,1,3-tetrafluoropropane under conditions sufficient to effect dehydrofluorination in the presence of a catalyst.

版权声明:问题易所有作品(图文、音视频)均来源网络,版权归原创作者所有,与本站立场无关,如不慎侵犯了你的权益,请联系我们告知,我们将做删除处理!