并肋用英语怎么说,并肋的英文翻译


词语导航

基本信息

词语:并肋

繁体:並肋

拼音:bìng lèi

英语翻译

【医】 fused ribWww.WenTiyi.CoM

分词翻译

并的英语翻译:

combine; equally

肋的英语翻译:

costal region; rib
【医】 costa; costae; costo-; rib

翻译例句

1. 贝格尔号换新木板肋材,并换上铜质船壳。

The Beagle was refitted with new timber planking and copper hull.

2. 针对某钢筋混凝土箱肋拱桥出现的裂缝,应用一些常用的加固技术进行结构加固,并对其机理作分析探讨。

According to the cracks occurred in the rc box-rib arch Bridge, reinforced the structures with some general Reinforcing Techniques, analysed and researched the mechanism.

3. 提出利用抗扰条肋抑制此类风致振动的方法,并通过试验方法模拟了圆截面杆件的风致振动,取得一定的振动抑制效果。

The method using interference rib is introduced, which simulate the wind vibration of round cross-section rod via the test, and gain some effect to reduce the vibration.

4. 提出了密肋复合墙体的抗侧刚度退化曲线和骨架曲线模型,并给出统一的表达式,为进一步的研究提供了基础。

The model of skeleton curve and the curve of stiffness degradation of the slab are presented, and the uniform expressions are given, which provides the foundation for successive study.

5. 本文根据试验和理论的分析结果,并参考相关设计规程,给出了外隔板式节点、垂直加劲肋式节点的设计建议。

The dissertation gives out the suggestion of outer diaphragm and flange stiffened joints based on the test, the academic analysis results and relative design codes.

6. 提出考虑材料与几何双重非线性的钢管混凝土肋拱面内受力的计算方法并编制了有限元程序。

A method is presented to analyze the behavior of concrete-filled steel tubular (CFST) arch, which considers the material and geometric nonlinear property, and a finite element program.

7. 利用能量法分析了加肋平板的稳定问题,推导了纵向临界力的计算公式,并探讨加劲肋的合理布置。

The paper analyses the stability of rib slab on method of energy, the formula of longitudinal critical force is deduced, and rational arrangement of stiffening rib is discussed.

8. 该文针对锅炉省煤器磨损泄漏问题,采用螺旋肋片技术对省煤器进行了改造,并给出了设计计算结果。

The paper shows a new method to use spiral finned tubes in the improvement of boiler economizer so as to solve its leakage problem caused by wear, and gives relevant design and calculation results.

9. 本文在简单回顾网壳结构现状后,提出了一种预应力加肋网壳结构,并对它进行了动力性能研究。

The dynamic properties of this structure are then investigated by using the spectrum and the time-history methods.

10. 并利用上述模型计算出控制内力,进行拱肋强度验算。

Utilize above-mentioned models to calculate out the control internal force, join the rib to intensity checking computations.

11. 塑料模壳适用于混凝土密肋楼盖的模板,对IC厂房无尘车间开孔密肋楼盖可拆式模壳技术进行系统阐述,并探讨施工要点及其控制方法。

Authors expound plastic formwork technology for open waffle slab of clean room in IC workshop systematically, and discuss the key problems in construction and controlling method.

12. 两侧加劲肋可以有效地提高试件的承载力,并对试件耗能性能有影响。

Both sides stiffening rib could effectively improve specimens" supporting capacity and has a influence on energy dissipation property.

13. 脊部设置在中间鞋底上方并固定至中间鞋底,且肋边轮廓为部分地包围使用者的脚。

The spine portion is disposed above and affixed to the midsole and the ribs are contoured to partially enclose the foot of the user.

14. 分析表明,拱肋变形降低了结构的极限承载能力,并增大了其在正常使用状态下的侧向变形,以致拱脚外包混凝土开裂严重。

The results show that the arch distortion weakens structural ultimate load bearing capacity, and increases lateral displacement at the bottom of .

15. 特性:柔韧性高弯曲半径小耐腐蚀力强不含卤素规格b:肋宽大,使软管能承受更大压力,并保持柔韧性。

Characteristics: high flexibility of small bending radius corrosion resistance strong halogen specifications b: rib loose, so that the hose can withstand greater pressure, and maintain flexibility.

16. 本文介绍了试验的情况,分析了模型肋拱面内受力全过程的性能,并初步探讨了其面内极限承载力的简化计算方法。

The mechanic behavior of CFST rib arch under in-plane load is studied. The simplified methods to calculate the structure"s in-plane ultimate strength are discussed as well.

17. 所述基座底部的定位槽与下机壳尾部两侧及顶端折弯并延伸的肋重合并固定。

The locating slot at bottom of base and ribs on two sides of extended tail part of low chassis as well as bent and extended from top are superposed and fixed each other.

18. 介绍了我国冷轧带肋钢筋的推广现状、应用前景和使用的优越性,并分析了当前冷轧带肋钢筋存在的主要质量问题;

Popularity of cold rolling ribbed bar, application prospect and used dominance of the ribbed bar were introduced. Some problems for quality of producing of cold rolling ribbed bar was analyzed.

19. 我国现行钢结构设计规范与规程对梁柱节点域的抗剪能力提出了具体的要求,并指出当节点域抗剪能力不足时可设置斜向加劲肋。

The codes and specifications of China in steel structure field require that the bearing ability of shear force in panel zone must be sufficient and the inclined stiffener should be applied.

20. 在结构型式上,采用纵向简支带肋面板,钢筋受到较好保护,并降低构件的荷载应力;

The longitudinal free slab with rib is selected, thus the steel bars can be better protected and the strain in construction members is reduced;

21. 在结构型式上,采用纵向简支带肋面板,钢筋受到较好保护,并降低构件的荷载应力;

The longitudinal free slab with rib is selected, thus the steel bars can be better protected and the strain in construction members is reduced;

版权声明:问题易所有作品(图文、音视频)均来源网络,版权归原创作者所有,与本站立场无关,如不慎侵犯了你的权益,请联系我们告知,我们将做删除处理!