等轴的用英语怎么说,等轴的的英文翻译


词语导航

基本信息

词语:等轴的

繁体:等軸的

拼音:děng zhóu de

英语翻译

【计】 isometric
【医】 homaxial

分词翻译

等的英语翻译:

class; grade; rank; wait; when
【机】 iso-

轴的英语翻译:

axes; axis; shaft; spindle
【医】 ax-; ax.; axes; axio-; axis; core

翻译例句

1. 产于侵入岩中的辉石一般呈等轴的粒状。

Tou Huishi). Pyroxene in intrusive rock is generally equiaxed grain.

2. 一个巨大125地图领域,在等轴的投射过程中。

A massive 125 map areas, in isometric projection.Www.wENtiYi.COM

3. 退火后,孪晶逐渐消失,形成等轴的再结晶晶粒。

The twins disappeared gradually and recrystallized grains formed after annealing.

4. 退火后,孪晶逐渐消失,形成等轴的再结晶晶粒。

The twinning disappeared gradually and recrystallized grains formed after annealing.

5. 采用形变热处理工艺,使工业用LF 6合金板材得到细小、等轴的晶粒组织。

A kind of fine and equiaxed crystal structure of LF6 aluminum alloy plate material is obtained by means of the technique of deformation heat treatment.

6. 冲击喷雾中大量固体成核剂的产生导致精细的等轴微结构。

The generation of a large population of solid nucleants in the impacting spray leads to a fine equiaxed microstructure.

7. 用户数量以一定的基数随x轴增加时负载水平成两倍或三倍等一直到随初始用户数量的6倍增长。

The number of users starts at some base value increasing along the X-axis where the load levels are doubled, tripled, etc. on up to 6x the original number of users.

8. 柱状晶向等轴晶转变(CET)是在一定的凝固过程中必须控制的一种显微组织转变。

The columnar to equiaxed transition (CET) is a kind of microstructural transformation in certain solidification, which should be controlled.

9. 当磁感应强度和频率匹配合适时,焊缝成形良好,焊缝组织几乎为细小的等轴晶。

With optimum magnetic intensity and frequency, the weld microstructures were almost fine equiaxed grains and the weld shape was.

10. 广泛用于零部件的压装成型、拉伸、弯曲、打孔、压印,轴类零件的校正和压装等。

Widely used in parts of the press-fit shape, stretching, bending, punching, stamping, shaft alignment and press-fit etc.

11. 柱状晶向等轴晶转变(CET)的研究具有重要意义,数值模拟是其有效的研究方法之一。

It is of great significance to the research of columnar-to-equiaxed transition (CET), and numerical simulation is one of the valid methods.

12. 从结晶器施加电脉冲输入能量、钢液过热度、电极间距三方面,探讨电脉冲处理提高铸坯等轴晶率的效果。

The improvement of slab equiaxed crystal ratio by electric pulse on liquid steel in continuous casting mould at Pan steel slab castor No.

13. 其中,焊核为明显的再结晶等轴晶粒,晶粒明显细化;

The weld nugget had a dynamic recrystallized, fine isometric crystal structure.

14. 本文研究了TC_6钛合金片状、网篮、等轴和双态组织的振动疲劳性能。

The vibration fatigue characteristics of TC6 titanium alloy with Widmanstatten, basket-weave, equiaxed and duplex microstructures have been studied.

15. 结果表明,铁素体组织随变形道次的增加逐渐演变为等轴状大角度晶界的亚微晶组织;

The results indicate that the initial ferrite microstructure gradually developed into the equiaxed submicrometer grain microstructure with high angle boundaries with increasing the pass number.

16. 从结晶器施加电脉冲的输入能量、电脉冲频率、钢液过热度角度,探讨电脉冲技术提高铸坯等轴晶率的效果。

The improvement of slab equiaxed crystal ratio by electric pulse on liquid steel in continuous casting mould of Panzhihua steel No.

17. 中空轴轴颈裂纹是水泥磨的严重故障。中空轴轴颈裂纹产生的原因主要有:铸造缺陷,应力集中,焊接和热处理质量问题等。

Crack in neck of hollow shaft is a very serious malfunction, main cause of the crack include: foundry defect, centralized stress, quality problems of welding and heat treatment.

18. 该文对该厂双螺旋输送机的输送能力及所需功率进行了核算,并介绍螺旋旋芯磨损严重、螺旋轴弯曲、串轴等故障进行技改的情况。

The transportation capacity and needed power of the conveyor are examined, with a description of the modification to the conveyor in its roller damage, axis bend, axis in series etc.

19. 内啮合齿轮泵的结构和其他齿轮泵结构类似,主要由外转子、转子、泵轴、泵体、前盖、托架、密封装置、轴承等组成。

Internal gear pump structure and other gear pump structure similar to, mainly by the outer rotor and rotor, pump shaft, pump body, the front cover, bracket, sealing device, bearing, etc.

20. 在循环加载试验中首次综合探讨了柱轴力大小、加劲肋构造措施等对连接性能的影响。

Effects of column axial force and rib stiffener on hysteretic behavior of connections were synthetically considered for the first time during cyclic-loading.

21. 齿轮泵的磨损部位主要有主动轴与衬套、被动齿轮中心孔与轴销、泵壳内腔与齿轮、齿轮端面与泵盖等。

Pump wear parts are mainly drive shaft and bushing, passive gear center hole and shaft pin, pump shell lumen and gear, gear face and pump cover, etc.

22. 常用的指标包括与键槽齿轮,开槽盘,轴等的碳素钢,铁,或磁性不锈钢制造。

Commonly used targets include gear teeth, slotted discs, shafts with keyways, etc. made of carbon steel, iron, or magnetic stainless steel.

23. 每轴底部的板子是否检验其孔尺寸,孔位,孔对准度与孔数量等?

Are output boards at the bottom of each spindle inspected on the hole size & location, hole registration and hole quantity etc?

24. 根据等轴枝晶生长过程的物理机制,改进了等轴枝晶生长的溶质扩散模型。

In the light of physical mechanism of equiaxed dendrite growth, solute diffusion models for equiaxed growth was improved.

25. 搭载艾森独创的多轴板式包胶结构,彻底解决市面上起绕绕不上、包偏等不良现象。

Ascend original plate equipped with plastic coating multiaxial structure, solve from around the wound is not on the market, including migraine and other undesirable phenomena.

26. 研究了凝固潜热对过冷合金熔液中的等轴枝晶生长以及溶质场和温度场的分布的影响。

The effects of solidification latent heat on the growth of equiaxed dendrite, distribution of solute field and temperature field in undercooled liquid alloy were analyzed.

27. 观察结果表明AA5182的晶粒在变形前后保持等轴状态不变,而6016的晶粒在变形中被拉长。

The results show that the grain of AA5182 keeps equiaxed before and after deformation, while that of 6016 was elongated due to tension deformation.

28. 介绍了某专用多轴钻床的用途、结构特点及原理等。

The application, the structure and principle of the special machine were introduced.

29. 采用矢量的方法,分析了离轴量等参量和准直性能之间的关系。

Vector expression is adopted in analyzing the relation between off-axis parabolic parameters and collimation property.

30. 采用矢量的方法,分析了离轴量等参量和准直性能之间的关系。

Vector expression is adopted in analyzing the relation between off-axis parabolic parameters and collimation property.

版权声明:问题易所有作品(图文、音视频)均来源网络,版权归原创作者所有,与本站立场无关,如不慎侵犯了你的权益,请联系我们告知,我们将做删除处理!