摆动凸轮用英语怎么说,摆动凸轮的英文翻译


词语导航

基本信息

词语:摆动凸轮

繁体:擺動凸輪

拼音:bǎi dòng tū lún

英语翻译

【机】 oscillating cam

相关词条

1.rockercam  2.oscillatingcam  

分词翻译

动的英语翻译:

act; move; stir; use
【医】 kino-

凸轮的英语翻译:

cam
【机】 adjustable toe piece; cam

翻译例句

1. 本文阐述了由偏置直动凸轮与摆动凸轮组成的联动机构的设计方法。

In this paper a design method of a combinatory CAM mechanism is stated, which is composed by offset translation CAM and oscillation CAM.

2. 在满足机构许用压力角条件下,采用0.618法最优确定盘状摆动凸轮机械的最小基圆半径。

Meeting requirement of the mechanical pressure angle, the minimum base radius of a plate cam for oscillating follower is determined by the 0.618 optimization method.

3. 本文对摆动从动杆盘状凸轮机构的最大压力角和最小曲率半径问题进行了详细的讨论。

In this paper, the pressure Angle and minimal radius of curvature of CAM mechanism with swinging roller follower are discussed in details.wWw.WEntiyI.cOM

4. 分析了摆动从动件盘形凸轮机构的压力角与基本尺寸之间的关系。

The relationship of cam with oscillating followers pressure angle and radius of basic circle were analyzed.

5. 本文还给出了第三种新的度示方法,证明了这三种度示方法的一致性,从而统一了直动从动件和摆动从动件平面凸轮机构运动转角的度示方法。

This paper also gives the third new method and proves the consistence of three methods, and unifies the method for measuring kinematic Angle of type-moving and type-flickering planar CAM mechanism.

6. 本文探讨了复动全开口提花机摆动从动件近似等径凸轮刀箱传动机构的设计原理。

The paper discussed the design principle of Approximate Equidiameter CAM mechanism with swing follower for actuating knife frame in Jacquard machine.

7. 就铝合金制作高速盘形凸轮机构摆动从动件的效益和可行性等问题进行了系统的研讨。

In this paper, the benefit and feasibility of adopting osculatory followers made of aluminum alloys for use in high-speed disk cam mechanisms are systematically delibrated.

8. 分析了摆动从动件圆柱凸轮机构误差产生原因,建立了数学模型,并给出其实际运动规律的方程。

To analyze the cause of design error on Oscillating follower Cylinder Cam Mechanism, building the mathematics model, and affording the equation to conform to actual motion rule.

9. 介绍了摆动滚子从动件盘形凸轮机构设计的解析法。

An analytical design method of disk CAM mechanism with oscillating roller follower is introduced.

10. 采用高副低代的方法,首次对平底摆动从动件等宽圆弧凸轮机构进行运动分析。

Kinematic analysis is carried out for the first time on constant-breadth arc CAM mechanisms with oscillating flat-faced follower by the method of replacing higher pair by lower pairs.

11. 对研究摆动从动件凸轮机构压力角和设计凸轮机构具有指导意义。

The results reported can provide a guidance in the research of the pressure angle of oscillating follower cam mechanisms and in the design of cam mechanisms.

12. 文章将这种方法应用于力锁合式的摆动从动杆移动凸轮机构。

The paper used this method to a force -sealed oscillating follower translating CAM mechanism.

13. 比较简单的方式是机构中包括一个由凸轮控制的连杆,用以驱动后梁摆动。

In its simpler form, the mechanism consists of a CAM operated lever to vibrate the back roll, called the whip roll.

14. 共轭凸轮递纸结构摆动控制,减少了振动噪声,使工作环境轻静自然。

Swing control of sheet transfer with conjugate CAM reduces vibration noise and makes working environment silent.

15. 文中以滚子摆动从动件平面凸轮为例,其解题方法也适用于其它类型平面凸轮机构。

The case of a plate CAM with an oscillating roller follower is taken as an example. This method is also applicable to other types of plate CAM system.

16. 介绍了凸轮轴车床摆动靠模的设计方法。

This paper describes the design method of the swinging master as the attachment in a camshaft copying lathe.

17. 建立了参数化的三维模型,并用反转法绘制了摆动输出凸轮的轮廓曲线。

The parametrical 3-D model is built and the output cam profile is drawn.

18. 分析了摆动从动件盘形凸轮机构的压力角与基本尺寸之间的关系。

The relationship of CAM with oscillating follower"s pressure Angle and Basic dimensions were analyzed.

19. 针对平底从动件盘形凸轮机构,导出了同时适用于直动和摆动从动件的凸轮廓线综合公式及凸轮实廓外凸的条件式。

And then expounded that these equations are the general synthetic equations suitable at the same time for plate CAM mechanisms with straight moving or oscillating followers.

20. 一种有摆动装置的牙排,其特征在于它包括牙排、凸轮块和摆动装置;

The invention provides a tooth row with a swinging device, which is characterized by comprising a tooth row, a cam bit and a swinging device.

21. 偏心摆动式递纸机构在胶印机中应用非常广泛。其中,递纸凸轮是递纸机构中精度要求最高的零件。

The eccentric swing paper transfer mechanism was widely used in offset press, and the paper transfer CAM is in the highest accuracy requirements in paper transfer mechanism.

22. 本文较为全面系统地推导了摆动滚子从动件圆柱凸轮的廓线、压力角及廓线曲率半径方程,并讨论了该种凸轮机构在各种运转情况下与之相适用的方程。

Mathematical formulas are derived comprehensively and systematically for the profile coordinate, pressure Angle and radius of curvature of the cylindrical CAM with an oscillating roller follower.

23. 特点:油浸式凸轮连杆机构,地梳固定不摆动,带耳沉降片穿防闭钢丝,送经箱体分别控制二辊罗拉积极送经。

Characteristics: Oil soaking CAM and connecting bar system; sinker with an eyelet to take unable-closed steel wire; let-off boxes control two rollers for positive let-off motion.

24. 将从动件的直线往复移动和定点往复摆动用虚拟摆动统一表示,采用单参数包络曲线理论建立直动和摆动从动件平面盘形凸轮轮廓的统一数学表达式。

In this article, the unified profile expression of the planar CAM mechanism with translation or oscillation follower is established based on the theory of envelopes for 1 parameter family of curves.

25. 将从动件的直线往复移动和定点往复摆动用虚拟摆动统一表示,采用单参数包络曲线理论建立直动和摆动从动件平面盘形凸轮轮廓的统一数学表达式。

In this article, the unified profile expression of the planar CAM mechanism with translation or oscillation follower is established based on the theory of envelopes for 1 parameter family of curves.

版权声明:问题易所有作品(图文、音视频)均来源网络,版权归原创作者所有,与本站立场无关,如不慎侵犯了你的权益,请联系我们告知,我们将做删除处理!