对称荷载用英语怎么说,对称荷载的英文翻译


词语导航

基本信息

词语:对称荷载

繁体:對稱荷載

拼音:duì chēng hé zǎi

英语翻译

【化】 symmetrical loading

相关词条

1.balancedload  2.symmetricalloading  

分词翻译

对称的英语翻译:

symmetry
【化】 symmetry
【医】 symmetry

荷载的英语翻译:

load

翻译例句

1. 环形板承受任意的轴对称荷载。

The annular plate is subjected to an arbitrary axisymmetric loading.

2. 丰富了圆柱壳在轴对称荷载作用下的塑性极限分析。

Enrich the plastic limit analysis of cylindrical shell under axisymmetric loads.

3. 注意结构是对称的, 而节点线位移表示反对称荷载。

We note that the structure is symmetrical and that sways represent antisymmetrical loading .

4. 任意荷载的作用含反对称荷载分量的图乘剪力的作用。

For any load the function from load is in multiplication shear force by antisymmetry load.

5. 本文对索承穹顶结构在轴对称荷载作用下的分析进行研究,并用能量变分原理进行求解。

In this paper the analysis of cable-supported dome structure under axisymmetrical loading is discussed and solved by the energy variational principle.

6. 我们将对在悬臂矩形板的一对相对的自由边作用有不同的对称边界荷载时,求出薄板的最小临界力。

We are going to find out the minimum critical loading for cantilever rectangular plates subjected to various edge loadings symmetrically on a pair of opposite free edges.

7. 本文用变分法对悬臂矩形板在对称边界荷载下的稳定性进行研究。

The stability of cantilever rectangular plates under the symmetrical edge loading will be studied in this paper by the variational calculus.

8. 本文用变分法对矩形弹性中厚板在对称边界荷载下的稳定性进行研究。

The stability of moderately thick plates under the symmetrical edge loading is studied by the variational approach.

9. 推导建立了轴对称空间体、弹性半空间体、圆形轴对称垂直荷载下的双层弹性连续体系的应力与位移的一般解;

The solution of stress and displacement of two-layer elastic continuous body is built under vertical load of axisymmetric, elastic upper space body and circle axisymmetric.

10. 又作了轴对称的有限元分析,能估算次生裂缝出现时的荷载以及次生裂缝出现后的端部滑移。

An axisymmetrical finite element analysis is also made, with which the secondary cracking load and the end slip after secondary cracking can be predicted.

11. 本文推导了多层各向异性地基在轴对称表面荷载作用下的位移和应力的初参数解法。

In this paper, displacements and stresses of multilayered anisotropic soil layers under axisymmetric surface loading are derived by use of initial function method.

12. 不对称结构在风荷载作用下,将引起平移和扭转的耦合运动。

Under the action of wind loading, motion coupled with translation and torsion will occur for unsymmetrical structures.

13. 本文用能量法讨论了悬臂矩形板在多种荷载作用下的不对称弯曲问题。

This paper discusses the problems of the unsymmetrical bending of cantilever rectangular plates under various loads by the energy method.

14. 非对称形式的施工荷载对悬臂施工阶段大跨径预应力混凝土刚构桥的稳定性更为不利。

The unsymmetrical construction loads is dangerous to the stability of long-span prestressed concrete rigid-frame bridge during cantilever construction phase.

15. 荷载为轴对称分布荷载、均布边缘力矩及径向力或它们的联合作用。

Loads are regarded as axisymmetrical distributed load, uniform moments and uniform radial forces along the edge or their combination.

16. 分析了荷载不对称的影响。

Moreover, the influence of asymmetry load is analyzed too.

17. 对有限长立井井壁在任意轴对称的法向、切向以及端面荷载的共同作用下的变形问题作了分析研究。

The problems of deformation for shaft lining are investigated under arbitrary axisymmetric normal loads and tangential loads with end loads.

18. 荷载为轴对称分布荷载及均布边缘力矩。

Loads are regarded as axisymmetrical distributed load and uniform moments along the edge.

19. 对于非轴对称混凝土板,影响其冲切破坏形态的因素主要是荷载的作用位置。

Load position is main influence factor for non-axisymmetric slab"s failure mode.

20. 用位移法计算连续梁、对称性荷载作用下的单跨多层刚架,总刚度阵为对称三对角阵。

Calculating the continuous beam, frame of single-span and multi-story by deflection method, the stiffness matrix is symmetrical three-diagonal.

21. 采用轴对称动力有限元结合系统识别反分析理论进行路面模量反算,考虑了落锤式弯沉仪(FWD)荷载作用下的路面反应动力效应。

This essay adopts limited units of axial symmetry and theory of system recognizing backcalculation, in which the dynamic effect of the road surface reaction to load of FWD is considered.

22. 本文运用ANSYS有限元分析软件对不对称双塔连体结构和对称双塔连体结构进行了风荷载和竖向荷载作用下的内力分析。

The internal force of the unsymmetrical and symmetrical double-tower connected structures which are effected by wind and vertical loads is analyzed by using ANSYS finite element.

23. 本文运用ANSYS有限元分析软件对不对称双塔连体结构和对称双塔连体结构进行了风荷载和竖向荷载作用下的内力分析。wwW.WEntIYi.CoM

The internal force of the unsymmetrical and symmetrical double-tower connected structures which are effected by wind and vertical loads is analyzed by using ANSYS finite element.

版权声明:问题易所有作品(图文、音视频)均来源网络,版权归原创作者所有,与本站立场无关,如不慎侵犯了你的权益,请联系我们告知,我们将做删除处理!