
词语导航
基本信息
词语:接合器
繁体:接合器
拼音:jiē hé qì
英语翻译
【化】 adaptor; clutch【医】 adapter
相关词条
1.adaptershiftingcoupling 2.bonder 3.socketadapter分词翻译
接的英语翻译:
receive; accept【电】 connecting
合的英语翻译:
add up to; be equal to; close; combine; join; proper; shut; suit; whole【医】 con-; sym-; syn-
器的英语翻译:
implement; organ; utensil; ware【医】 apparatus; appliance; crgan; device; organa; organon; organum; vessel
翻译例句
1. 焊接式护罩和接合器降低了后阶段损坏。
Weld-on shrouds and adaptors lower the risk of downstream process damages or losses.
2. 转向柱轴接合器过紧。
Column shaft coupler binding.
3. 安装迅速,每一个接合器可取代多达10个零散的硬件。
It can be easily installed and can replace round 10 parts for each connector.
4. 本实用新型解决了目前消防水泵接合器中铁螺旋盖和铁制体泵接口处的铜圈容易被盗窃的问题。
The fire pump jointer of the utility model comprises an iron screw cap, a copper ring, and an iron body pump.
5. 有时管子被堵住了,有时卡圈从接合器上掉下来了,有时我必须用侧视镜来倒车,而这辆卡车有6万镑重。
Sometimes the hose gets clogged. Sometimes the chain comes off the mixer. And sometimes I have to use the side mirrors to move the 60,000-pound truck in reverse.
6. 这些部分(自然通过一个接合器)与那些听起来更诗情画意,例如“联合”、“命运”和“和谐”之类的美国和欧洲建造的模块相连。
These connect (via an adaptor, naturally) to the more touchy-feely sounding US and European-built modules Unity, Destiny and Harmony.
7. 在本文中,我分析了J2EE环境中服务器端资源(例如数据库、消息队列、目录和企业系统)的连接合用。
In this article, I examine connection pooling in a J2EE environment for server-side resources such as databases, message queues, directories, and enterprise systems.
8. 他们也将用模拟器学习如何与国际空间站接合和如何驾驶新的月球登陆车“牵牛星”号登陆月球表面。WwW.WeNTIyi.COM
They will also use simulators to learn how to dock with the ISS and how to fly the new lunar lander, Altair, down to the moon"s surface.
9. 汽车上的离合器在正常行车时,是处在紧密接合状态,离合器应无滑转。
Clutch on the car in normal driving, is in a close bonding state, the clutch should not slip.
10. 离合器接合过程半接合点的确定和控制参数的选取是提高自动变速车辆起步品质的关键。
The determination of clutch half joint and its control parameter selection are the keys to improve the starting quality of auto-shift vehicles in the clutch engagement process.
11. 然后详细分析了离合器的接合过程、评价指标及其影响因素,建立了离合器接合过程中的车辆动力学模型。
Then, the paper analyzed the engaging process of clutch, performance indexes and influencing factors, and founded the vehicle dynamic model of the clutch engagement.
12. 优化结果表明,弹簧在离合器接合和分离过程中的变形能随其结构参数和性能参数有某种变化规律。
The optimum results showed that some laws of the strain energy of the spring in clutch engaging and disengaging change with structure and performance parameters of the spring.
13. 采用数值仿真和优化方法,对主离合器接合过程进行了分析研究,提出了最佳接合过程的压紧规律。
The engagement process of the main clutch is analyzed using digital simulation and optimization and a compressing rule of optimal engagement process is presented.
14. 离合器半接合点位置的判断是车辆自动变速传动控制的关键技术之一。
Location estimation of half engagement point of a clutch is one of the key technologies in an automatic transmission system.
15. 通过对离合器传动系动力学分析,建立了车辆起步时变速器输入轴速度与离合器接合位移之间的传递函数模型。
Transfer function model between the input speed of transmission and the engagement displacement of the clutch is built up through an analysis on the system of drive of the vehicle.
16. 在对履带式推土机主离合器接合过程分析的基础上,建立了其数学模型。
On the basis of an analysis of the engagement process of the main clutch on tracked bulldozer, a math model is established.
17. 针对AMT离合器接合位置控制系统具有的时滞弱非线性特性,采用DMC-PID串级预测控制算法应用于该系统。
In view of the weak nonlinearity and time-delay characteristics of AMT clutch engagement position control system, DMC-PID cascade predictive control algorithm is applied to the system.
18. 接合角度传感器杆并放置好角度传感器。
Engage Angle sensor lever and position Angle sensor.
19. 离合器装在汽车发动机与变速器之间,起接合或切断动力传递的作用。
Clutch is fixed between engine and transmission shaft, which ACTS as the role of combining or cutting the transfer of motivity.
20. 针对装有电磁离合器的电控机械式自动变速器车辆,系统地分析了电磁离合器接合阶段的特点及其对起步性能的影响。
The characteristics of electromagnetic clutch during engaging and its influence on starting are analyzed systematically for vehicles that equipped with AMT and electromagnetic clutch.
21. 建立了惯性式同步器接合过程数学模型。
The mathematic model describing shift and synchronizing process was established.
22. 推导出了通用性强的同步器接合过程的计算公式,较全面地反映了各种参数对同步器性能的影响。
Universal formulas of synchronizing process, which are inferred from the model, take into consideration all parameters that affect synchronizer performance.
23. 在拆卸带锁的连接器时,应向接合处方向按压连接器,使锁爪松动并将锁拆下。
When removing the connector with a lock, press the connector toward the engagement and remove the lock by making the lock claw movable easily.
24. 提出了一种间接合成的低相位噪声频率综合器的设计,该频综器用于某机载雷达中,从而要求其在极其恶劣的环境中同样具有良好的性能。
This paper presents a low phase noise indirect frequency synthesizer, which used in airborne fire control radar and is required to operate in a very harsh environment.
25. 推导出了同步器接合过程的计算公式,较全面地反映了各种参数对同步器性能的影响。
The universal formulas of synchronizing process were derivated, which took all parameters affecting synchronizing performance into account.
26. 飞行器翼身接合部构成的二面角反射器是很强的电磁散射源。
The dihedral corner reflector with wing and fuselage joint of aircraft is a very strong electromagnetic source in a wide angular range.
27. 因此研究离合器的接合规律和制定离合器的接合控制策略是本论文的重点和难点内容。
So, the study of the engaging law and control strategy is the important and difficult point of this paper.
28. 因此研究离合器的接合规律和制定离合器的接合控制策略是本论文的重点和难点内容。
So, the study of the engaging law and control strategy is the important and difficult point of this paper.
版权声明:问题易所有作品(图文、音视频)均来源网络,版权归原创作者所有,与本站立场无关,如不慎侵犯了你的权益,请联系我们告知,我们将做删除处理!
