氧化丙烯用英语怎么说,氧化丙烯的英文翻译


词语导航

基本信息

词语:氧化丙烯

繁体:氧化丙烯

拼音:yǎng huà bǐng xī

英语翻译

【化】 oxypropylene; propene oxide; propylene epoxide; propylene oxide

相关词条

1.propyleneoxide  2.1,2-epoxypropano  3.propeneoxide  

分词翻译

氧的英语翻译:

oxygen
【医】 o; O2; oxy-; oxygen; oxygenium; phlogisticated gas

化的英语翻译:

burn up; change; convert; melt; spend; turn

丙烯的英语翻译:

propylene
【化】 propene; propylene
【医】 alcohol propyl; propene; propylene

翻译例句

1. 文章介绍了丙酮的市场应用和开发前景及工业上催化氧化丙烯直接生产丙酮的工艺流程。

The article Introduces market application, and develop prospect of acetone as well as industrial USES of catalytic oxidation and direct oxidation of propylene to acetone.

2. 用乙苯氢过氧化物氧化丙烯制取环氧丙烷是目前生产环氧丙烷最有前途的工艺路线之一。

The process producing propylene oxide by epoxidation of propylene with ethylbenzene hydroperoxide is one of the most promising methods in recent years.

3. 经计算得到的模拟结果对过氧化氢氧化丙烯制备环氧丙烷工艺的工业化有一定的参考价值。

The result of simulation is valuable for industrialization of propylene oxide producing process by hydrogen peroxide.

4. 采用三官能度的聚氧化丙烯醚醇、聚乙二醇,合成了吸水膨胀率在0~200%的聚氨酯弹性体。

Using tri-functionality polyoxytrimethylene alcohol ether and polyethylene glycol, synthetize polyurethane elastomer with water absorption expansion rate of0~200%.

5. 以聚氧化丙烯二醇和甲苯二异氰酸酯、一缩二乙二醇等为主要基体材原料,以联二脲(LDA)、聚磷酸铵(APP)作为阻燃剂,制作了聚醚聚氨酯弹性体。

Polyether polyurethane elastomer material was prepared based on polypropylene oxide glycol, toluene diisocyanate (TDI) and DEG as main base meterial, LDA and APP as flame retardants.

6. 聚丙烯;纳米氢氧化铝;红磷;表面改性;阻燃性;力学性能。

PP; nano-sized ATH; red phosphorus; surface modification; flame retardancy; mechanical property.

7. 秀丽台实体面材是一种先进的高分子复合材料,主要成分是甲基丙烯酸甲酯(MMA )和氢氧化铝填充物。

Solidtop solid surfaces are an advanced composite of aluminum-tri-hydrate and methyl methacrylate (MMA) developed as a practical material for living.

8. 丙烷氧化脱氢制丙烯是利用天然气、油田气和炼厂气的一个重要课题。

The oxidative dehydrogenation of propane (ODP) to propene is one important subject in natural gas, oil field gas and refinery gas application area.

9. 研究了以钼醇配合物为催化剂,过氧化氢异丙苯为环氧化剂,乙醇为溶剂的丙烯一步氧化制环氧丙烷的反应。

The epoxidation of propylene to propylene oxide, using cumene hydroperoxide as oxidant, molybdenum glycol complex as catalyst and ethanol as solvent, has been investigated.

10. 着重介绍了国外丙烯环氧化的胶团催化技术,包括胶团催化机理、反应体系设计以及工艺开发。

The epoxidation of propylene by micellar catalysis, including the study on reaction mechanism, the design of micellar catalysis system and its process development, were mainly introduced.

11. 评述了以分子氧和双氧水为氧源的丙烯环氧化催化剂体系的最新研究进展。

Recent research progress on the propylene epoxidation catalysts which use molecular oxygen or hydrogen peroxide as oxidants is reviewed.wWW.wENtiYI.cOm

12. 制备了一系列叔丁醇氧化制甲基丙烯(?)的多组份催化剂。

A series of multicomponent catalysts for preparation of methacrolein by oxidation of tertiary butyl alcohol were prepared.

13. 开发了丙烯环氧化反应产物的分离工艺流程。

The products" separation process in propylene epoxidation reaction is developed in this paper.

14. 对两种不同的氯丙烯环氧化与蒽醌法生产过氧化氢过程的集成方法进行了研究。

Two different integrated processes of the epoxidation of allyl chloride and production of hydrogen peroxide by anthraquinone route were investigated.

15. 利用分子氧为氧化剂进行丙烯的环氧化反应是最理想的反应,同时也是世界催化领域内最具挑战性的课题之一。

Propylene epoxidation with molecular oxygen as the oxidant is the most desirable reaction and is one of the most challenging topics in catalysis.

16. 水、丙烯晴和半乳甘露聚糖胶,同碱金属氢氧化物在一起,加入到反应器中。

Water, acrylonitrile and the galactomannan gum are added to a reactor with an alkali metal hydroxide.

17. 研究了丙烯氨氧化制备丙烯腈反应过程中开车条件对催化剂特性的影响。

The effect of starting operation conditions on the characters of the catalyst in the producing process of acrylonitrile through ammoxidation of propylene were studied.

18. 研究了纯丙烯气相氧化的环氧化反应。

The epoxidation of propene in gas phase has been investigated.

19. 采用低毒的N羟甲基丙烯酰胺体系凝胶注模成型氧化铝陶瓷,研究了该体系下浓悬浮体的制备及固化过程。

The alumina ceramics is gel-mould cast with low toxic N methylolacrylamide system. This paper reports the investigation on the preparation of alumina suspension and its solidification process.

20. 研究了氧化剂、还原剂以及温度对环氧丙烯酸酯胶粘剂性能的影响。

The effect of the oxidant, the reductant, and the temperature on the performance of the adhesive were investigated.

21. 在超高真空条件下,用对样品进行闪烁加热的方法测定了蓝色氧化钨WO _(2.90)吸附丙烯和氧的热脱附谱。

The thermal desorption spectra of propene and oxygen adsorbed on blue tungsten oxide WO_ (2.90) have been measured by means of flash heating the sample in ultra high vacuum.

22. 介绍了采用固体过氧化物生产聚丙烯专用树脂z50s的过程。

The process of using solid peroxide for producing special PP resin Z50S is described.

23. 研究了喂入粗纱间距、捻系数与成纱性能的关系,测试分析了聚丙烯腈预氧化纤维涤纶长丝包芯纱的性能。

Relation among feeding roving gauge, twist factor and yarn property were researched, property of polyacrylonitrile preliminary heat treatment in oxidizing polyester filament core-spun yarn was tested.

24. 讨论了用臭氧氧化法对聚丙烯表面进行涂装性改良时,臭氧浓度和臭氧发生气组成对聚丙烯表面氧化过程的影响。

The effects of ozone concentration and ozone - producing gas compositions on the oxidation process of the PP surfaces have been studied in this paper.

25. 本文采用干湿法纺制共聚丙烯腈纤维,并进行预氧化,碳化制成碳纤维。

Carbon fiber is produced by dry-wet spinning of copolymerized PAN followed by preoxidation and carbonization.

26. 实验结果表明,在CT-4A催化剂上,丙烯醛为反应过程的中间产物,丙烯腈、乙腈、一氧化碳、二氧化碳等均为丙烯氨氧化的平行产物;

The result shows that for catalyst CT-4A acrolein is a middle product and acrylonitrile, acetonitrile, carbon dioxide and carbon monoxide could be treated as parallel products.

27. 根据聚丙烯腈基碳纤维生产工艺路线,从原丝、 预氧化、碳化工艺及结构上分析了聚丙烯腈基碳纤维焦油形成的原因。

The reasons for tar formation from polyacrylonitrile-based carbon fiber were analyzed from the structure and the production line, from as-spun fiber, pre-oxidation to carbonization.

28. 根据聚丙烯腈基碳纤维生产工艺路线,从原丝、 预氧化、碳化工艺及结构上分析了聚丙烯腈基碳纤维焦油形成的原因。

The reasons for tar formation from polyacrylonitrile-based carbon fiber were analyzed from the structure and the production line, from as-spun fiber, pre-oxidation to carbonization.

版权声明:问题易所有作品(图文、音视频)均来源网络,版权归原创作者所有,与本站立场无关,如不慎侵犯了你的权益,请联系我们告知,我们将做删除处理!