
词语导航
基本信息
词语:应变测量技术
繁体:應變測量技術
拼音:yīng biàn cè liáng jì shù
英语翻译
【化】 strain measurement technique
分词翻译
应变测量的英语翻译:
【化】 strain measurement
技术的英语翻译:
art; science; skill; technique; technology
【计】 switching technique; techno
【医】 technic; technique
【经】 technique; technology
翻译例句
1. 本文介绍了利用应变测量技术测量角加速度的方法。
This paper introduces the measurement of angular acceleration with strain measuring technique.
2. 采用电阻应变测量技术研究了带有初始随圆度的弯管在纯内压作用下的应力分布。
The stress distribution of a curved pipe with an initial elliptic cross section under internal pressure was studied by using electric resistance strain method.wWW.WENtiYi.cOM
3. 研究了一种用光纤光栅测量动态应变的阵列传感技术。
An array sensing technique of fiber grating for the dynamic strain measurement is demonstrated in this paper.
4. 试验结果验证了采用非接触式光电检测技术测量中应变率材料力学性能的可行性。
The feasibility of measuring the mechanical property of material in the mid strain rate condition with the non contact photoelectric detecting technology is verified by experimental results.
5. 本文提出一种利用小型实验装置测量推进器药柱表面应力应变响应的技术。
The paper presents a novel technique to measure the stress strain response at the exposed surface of propellant grain using a miniature-testing device.
6. 这种新型纺机摇架加压测量仪采用应变原理结合最新电子技术研制而成。
The new pressure measuring device for loom rocking arms adopts the combination of the straining principle and the newest electronic technology.
7. 分析了动态应变仪的测量原理和调平衡技术的原理。
It analyses the measuring principle of dynamic strain gauge and introduces the principle of adjusting balance.
8. 并详尽地讨论了应力应变电测技术在船用柴油机轴功率测量中的应用。
It also discusses in detail the application of the technique to measurement of the power of a Marine diesel engine.
9. 因此,我们提出了应变测量的新技术。
Therefore, we proposed a new technique for strain measurement.
10. 本文简要介绍了高温应变测量原理和技术在大型汽轮发电机转子护环热套应力测试中的成功应用。
The technique and its principle of high temperature strain measurement are introduced to determine heat sleeve stress about rotor retaining ring of large turbogenerator.
11. 该论文介绍了当电阻应变法用于压力容器应力测量时具有的一些明显的特点及注意事项和可能遇到的一些技术问题。
On basis of practice teaching, this paper introduced some obvious features and attentions and some technic problems when measuring pressure vessels stress with resistance strain gauge.
12. 提出了一种新型PZT的动态调制光纤光栅应变力测量技术。
A new type technology of dynamic PZT modulation with fiber grating is proposed.
13. 为进一步研究大型覆盖件冲压成形质量分析的技术,采用混合网格法进行变形区域塑性主应变分布测量。
A hybrid grid method was used to determine the principal plastic strain distribution in a deformed area of a sheet metal piece.
14. 介绍了应力应变电测技术的基本原理,分析和设计了电阻应变测量电路。
The basic principle of strain electronic measurement technique is introduced. The circuit of strain measurement with bonding resistance is analyzed and designed.
15. 测量应用采用完全温度补偿技术和自动化记录系统的空心包体应变计进行,得出了该地区地应力分布的基本规律。
To find out thoroughly the reasons of slopes unstability, earth stress has been measured at slope by means of technique of temperature compensation and automatic recording.
16. 介绍了布里渊光时域反射计(BOTDR)的分布式光纤应变测量原理,并应用BOTDR技术对钢筋混凝土T型梁加载后的应变分布进行了测量。
The principle of Brillouin optical time domain reflectometer (BOTDR) is introduced and its application to the strain monitoring of the strain distribution of the reinforced concrete beam is studied.
17. 简述了静态应力应变测量的基本方案,并对方案实施中的几个测量技术问题做了较详细的论述,给出了测量结果的一般分析方法。
Gives the basic scheme of static stress and deformation, and discuss some measure technology problem carefully, at last, supports the analysis-method of measure result.
18. 阐述了轴功率测量系统的原理、数学方法、应变电测技术,系统的设计及数据处理。
The theory, mathematics method, technology of reacting electrical measurement is introduced in this article. The design of the system and the data processing for the system is also introduced.
19. 实验表明改进的BOTDA测量技术可以对钢筋、混凝土的应变分布提供全面的描述。
Experimental results show that the improved BOTDA measurement can provide a comprehensive description on the strain distribution of steel rebar or concrete.
20. 但是将光纤光栅传感器埋入混凝土中,进行动态应变测量,尚存在诸如解调、封装等工程技术难题有待解决。
But it"s difficult to demodulate the light signal and encapsulate the FBG when the dynamic strain inside the concrete is measured.
21. 作者还用应变片技术对算例的钢梁做了系列实验测量。
Using resistance strain gauge, the authors obtain several series of valuable records from a crash experiment of the sample.
22. 本文通过对应变天平测量原理的分析研究,提出了风洞应变天平结构和电气的设计方法,详细介绍了自动天平校准设备的系统构成、主要性能和技术指标。
Based on analyses and study of the working principle of strain gauge balances, the method was introduced in this paper for structural and electric design of the calibration system.
23. 本文通过对应变天平测量原理的分析研究,提出了风洞应变天平结构和电气的设计方法,详细介绍了自动天平校准设备的系统构成、主要性能和技术指标。
Based on analyses and study of the working principle of strain gauge balances, the method was introduced in this paper for structural and electric design of the calibration system.
版权声明:问题易所有作品(图文、音视频)均来源网络,版权归原创作者所有,与本站立场无关,如不慎侵犯了你的权益,请联系我们告知,我们将做删除处理!
