阀筒用英语怎么说，阀筒的英文翻译

词语导航

基本信息

词语：阀筒

繁体：閥筒

拼音：fá tǒng

英语翻译

【化】 valve cylinder

分词翻译

阀的英语翻译：

clique; valve
【化】 valve
【医】 limen; limina; valve

筒的英语翻译：

a section of thick bamboo; canister; tube-shaped object
【医】 balloon; tubo-

翻译例句

1. 阀芯为一只或多只流量控制筒。

Spool for one or more flow control tube only.

2. 旋筒阀已经解决了传统的调节阀所遇到的一些问题，而且部分已超出了传统调节阀的性能。

Rotor type valve has solved some of the problems encountered by the traditional control valve, and the part has been beyond the traditional control valve performance.

3. 弹筒型阀可以安装到一个驱动器端口。

A cartridge-type valve can be installed into an actuator port.

4. 根据不同工况，旋筒阀选用不同的控制元件，可以分类如下。

According to different working conditions, rotary cylinder valve selection of different control components, can be classified as follows.

5. 阀腔内设有不锈钢过滤网，维护保养筒单。

Equipped with stainless steel screen in the valve chamber, it is easy to service and maintenance.

6. 文中介绍了筒阀的结构特点、功能及控制原理等，并对其在现场的实际应用情况进行了分析。

The construction, function, and control principles of the ring gate are introduced, and the practical application is analyzed.

7. 对旋风筒翻板阀卸料过程进行了分析。

Discharging process of SLATE valve has been studied in this paper.

8. 利用车铣加工技术在薄壁筒零件加工方面的优势，分析了实现复杂阀芯零件完整加工的可能性。

As the turn-milling technology can be achieved complete machining for rotating body components, minimize the times of re-location meet the parts processing requirements.wWw.wentIyi.cOM

9. 本文简述了利用自吸筒来替代离心泵水下底阀，以解决离心泵气缚现象的工艺设计。

This article briefs the process design of the replacement of centrifugal pump"s underwater bottom valve by self-absorption cylinder so as to solve the aerial binding phenomenon with centrifugal pumps.

10. 该泵对泵筒、柱塞、固定阀做了设计，改善了泵筒受力状况，提高了螺纹的密封性能和抗拉强度。

The barrel, plunger and standing valve of the pump were designed, improving the barrel"s force conditions and reinforcing the screw thread"s sealing performance and tensile strength.

11. 流通能力大、流阻小。这是因为开启后阀芯位于藏球室内，阀体流道呈直筒式。

Flowing capability is big and the flow resistance is little. When the valve opening, the valve core is located inside ball cavity and the flow route is straight tube.

12. 闭合阀件通过柱塞与小瓶和注射器筒体之间的流体通路相关联。

A closed valve is associated with a fluid passageway between the vial and the syringe barrel through a piston.

13. 即使在具有该槽（32）的位置配置有中间滑 动阀（14）的状态下，也可将注射筒（12）的内部减压。

Even when an intermediate sliding valve (14) is disposed at the position of the groove (32), the interior of the syringe cylinder (12) can be depressurized.

14. 因此，在真空打栓时，可利用注射筒(12)的开口端(30)的附近保持中间滑动阀(14)。

Therefore, during the vacuum plugging, the intermediate sliding valve (14) can be held near the opening end (30) of the syringe cylinder (12).

15. 水轮机采用设置在转轮外缘出口处的可调筒阀进行过流量的调节后，各项水力性能均将有所改善。

An adjustable cylindrical valve is used for overflow regulation at outlet of water-wheel outer periphery to improve various hydraulic performances.

16. 发球筒平衡接管的作用是在通球初始时，出球接口端的阀门未开启前使清管器在发球筒中处于前后压力平衡，不能撞向阀芯。

The balance extension tube functions to retain balanced pressure in front and at the back of the cleaner prior to the opening of the valve to prevent it from impacting the valve core.

17. 主要产品：高压静电发生器、喷枪、高压模块、不锈钢粉桶、文丘里粉泵、滤筒、脉冲阀。

The main products: high voltage static generator, spraying gun, high voltage module, stainless steel powder bucket, Vuncheri powder pump, filter cylinder and pulsation valve.

18. 设置安全阀可使得在轮胎压力达到设定值时，筒体形成空载。

The arrangement of the safety valve makes the barrel body form zero load when the tyre pressure reaches the set value.

19. 结果筒鞘蛇菰甲醇提取物的正丁醇部位能显著提高小鼠热刺激的痛阀；且对小鼠醋酸扭体反应具有显著的抑制作用。

Results Then-BuOH fraction in methyl alcohol extract could significantly prolong the latencies of paw licking and decrease mice writhing.

20. 筒形可调节流阀主要用于节流压井管汇，控制井内流体套压用。

Tube of shape Can transfer throttle chief be used for Choke and Kill Maniflod , Control oil gas wellhead In fluid pressure use.

21. 按功能可分为针形可调节流阀、筒形可调节流阀。

Points function can divide into a needle shape can transfer throttle, Tube of shape can transfer throttle.

22. 它主要由内筒、外筒、带有单向阀的活塞、溢流件、调节环，密封圈等组成。

The leakproof hydraulic damper is mainly composed of an inner cylinder, an outer cylinder, a piston which is provided with one-way valves, overflow members, adjustment rings, seal rings, etc.

23. 驱动柱塞、安装过滤网的内筒、浮力阀顺序连接组成转子；

The drive cylinder, outer shell of built-in board brush, intermediate joint and sand collector are connected into stator;

24. 驱动柱塞、安装过滤网的内筒、浮力阀顺序连接组成转子；

The drive cylinder, outer shell of built-in board brush, intermediate joint and sand collector are connected into stator;