安装应力用英语怎么说，安装应力的英文翻译

词语导航

基本信息

词语：安装应力

繁体：安裝應力

拼音：ān zhuāng yīng lì

英语翻译

【化】 erection stress

分词翻译

安装的英语翻译：

fit; fix; install
【计】 erecting
【化】 setting
【经】 installation

应力的英语翻译：

stress
【化】 stress
【医】 stress

翻译例句

1. 本文对某一型号民用柴油机机体安装应力和静态应力测量及疲劳试验进行了分析研究。

This article analyse a type of civil diesel engine block assembling stress measurement, static stress measurement and fatigue test.

2. 李彩和，19岁，来自甘肃，工作12个小时，内容是把9个零部件安装在诺基亚N90手机的母板上，“这需要集中注意力，才开始压力非常大”，她说，“现在我知道了我可以去找辅导员，但是我不觉得能有帮助，我适应力很强，我能够应付，每次我和父母通电话时，我都努力使自己听起来比较高兴，我不想说出我的压力”。

"It takes so much concentration, it was very stressful at first, " she says. "I know I can go to a counselor, but I don"t think it will help.

3. 安装到路基上，尤其当路基的基础应力很高的情况下，它能吸收并从根本上减弱有裂缝或交通而产生的张应力缝值。

Installed on the subgrade, especially when the basis of subgrade stress is very high, which can absorb and fundamentally weakened cracks or traffic and the tensile stress of the joint values.

4. 安装到路基上，尤其当基础张应力很高的情况下，它能吸收并从根本上减弱有裂缝或交通而产生的张应力缝值。

Installed on the subgrade, especially when the basic tensile stress is very high, which can absorb and fundamentally weakened cracks or traffic and the tensile stress of the joint values.

5. 管（道支）架要有一定的强度及刚性，与其荷载和服务相适应，并且其安装不应对建筑结构产生过度应力。

Supports shall be of strength and rigidity to suit loading, service and installed in manner which will not stress unduly the building construction.

6. 基于随机安装偏差模式，利用空间有限单元法和概率方法，分析了网架结构由于安装偏差引起的初始应力和初始位移。

Based on the assumption of random installation deviation, the finite element met hod analyzing the initial displacement and stress of grid structures was set up.

7. 采用悬吊式安装，解决了热膨胀应力补偿问题，既不需设备基础，也不需膨胀补偿节。

The use of a suspended installation, solved the issue of compensation for thermal expansion stress, we do not have basic equipment and need not be inflated compensation section.

8. 最后，对具有安装误差的蜗轮副模型进行了有限元分析，得到相应的应力云图。

Finally, we studied the worm gear model with installations error used finite element analysis, and acquired mises stress nephogram.

9. 设备、管线的选材安装充分考虑临氢条件、腐蚀、冲击、振动、应力等因素。

Selection of equipment and pipeline material and their installation need to completely consider various factors of critical hydrogen condition, corrosion, impact, vibration, stress etc.

10. 文中介绍了预应力钢筒混凝土管道的装卸、运输、堆放和辅设安装的施工工艺。

In this paper, the author introduces the construction technology of PCCP (prestressed cylinder concrete pipe) in the course of its handling, transporting, stacking, placing and installing.

11. 文中着重介绍一种新型伸缩缝——预应力弹性胶管伸缩缝的构造、制作与安装以及试验和使用情况。

It also presents a new type of prestressed elastic neoprene tube expansion joint used in highway decks.

12. 利用三维有限元法分析计算了左江水利枢纽安装间坝段的应力。www.WEntIyI.Com

With three dimensional finite element method, the author analysed and calculated the stress of the dam section with erecting bay in the Zuojiang water resources pivotal project.

13. 利用数值模拟和仿真模型分别进行对比分析汽车后三角包边玻璃总成安装到车身上后玻璃的应力分布。

In order to investigate the stress distribution of the assembled rear glass with wrap in a car, the numerical simulation and simulation model methods were put forward.

14. 本实用新型涉及一种安装于公路桥U型桥台侧墙混凝土内部的能够锁定预应力钢绞线底 端的锚具。

The utility model relates to an anchor capable of locking the bottom of a prestressed steel strand which can be arranged in concrete of side wall of a road bridge U-shaped bridge abutment.

15. 这种加热槽结构简单，焊缝少，减少产生应力腐蚀的可能性，安装方便，加热效果好，节约能源。

The heating tank has simple structure, less welding lines, convenient installation, good heating effect, and energy conservation, and reduces the possibility of stress corrosion.

16. 安装时先安装预应力拉杆副，然后施加预应力，最后安装抗剪键。

When in installation, the prestressed pull rod pairs are firstly installed, then the prestress is applied, and the shear keys are finally installed.

17. 该装置将试样通过上、下夹头安装在主承力框架内，利用弹簧对试样施加轴向载荷，使试样承受恒定的拉伸应力。

The specimen was put in framework by top and bottom fixture and constant tensile load was applied by spring.

18. 考虑地应力的释放和衬砌安装的时序，提出合理模拟隧洞修筑过程的力学模型。

Firstly, an appropriate mechanical model considering the stress relief and the installation sequence of the lining is proposed to model the construction sequence of the tunnel structure.

19. 后张法预应力混凝土I形梁预制张拉时，易产生侧向位移，影响梁片的安装、使用和安全。

When the precast I beam is tensioned, the lateral displacement tends to take place and will affect the installation, application and safety of the beam.

20. 介绍了应力波安装干涉配合紧固件的原理，结合工程应用提出了干涉配合紧固件应力波安装仪的方案。

This paper introduces the principle of driving interfere nce-fit fastener with stress-wave, and develops the stress-wave driving apparatus for interference-fit fastener.

21. 介绍了应力波安装干涉配合紧固件的原理，结合工程应用提出了干涉配合紧固件应力波安装仪的方案。

This paper introduces the principle of driving interfere nce-fit fastener with stress-wave, and develops the stress-wave driving apparatus for interference-fit fastener.