工时研究用英语怎么说，工时研究的英文翻译

词语导航

基本信息

词语：工时研究

繁体：工時研究

拼音：gōng shí yán jiū

英语翻译

【机】 time and motion study

分词翻译

工时的英语翻译：

man-hour
【化】 man hour
【经】 man-hour

研究的英语翻译：

research; study; consider; delibrate; discuss; investigate
【医】 research
【经】 search; study

翻译例句

1. 对于这个问题，研究人员建议，招聘经理们在筛选员工时应多加考察。

Hiring managers could head off the problem by being more thorough when screening potential employees, according to researchers.

2. 但科克指出，该研究调查的是适度上网、或上网时间不到总工时20%的人。

However, Coker said the study looked at people who browsed in moderation, or were on the Internet for less than 20 percent of their total time in the office.

3. 建立所研究的区域内岗位的标准工时、标准操作规程和产能。

Establish standard cycle time, standard Operating Procedure and production capacities for posts in the study area.

4. 以工艺标准化为基础，研究了制定典型工序的工时定额标准技术。

On the basis of the standardized processes, the technology of setting standard Time criterion of the typical procedure is researched.

5. 研究了可中断的带有到达时间的使总完工时间最小的恒速机排序问题。

A preemptive uniform machine scheduling problem with arrival time and minimum makespan is studied in this paper.

6. 通过对钻孔加工族的时间研究，初步建立不同工步单件加工时间的标准资料，并探讨节省作业转换时间的方法。

By studying some boring machining families, standard time datum for unit operation was set up. Some methods of shortening operation changing time were also presented.

7. 根据SLS加工工艺的特点，研究的工艺参数包括：层厚、扫描间距、激光功率、扫描速度、环境温度、层与层之间的加工时间间隔和扫描方式。

According to the feature of SLS, the parameters of interest are layer thickness, hatch spacing, laser power, scan speed, work surroundings temperature, interval time and scanning mode.

8. 其次，论文对产品设计工时定额进行了研究。

Secondly, the paper conducts researches on one of the key technologies -time quota.

9. 无锡桥联重工设计研究院有限公司提供的高速线材生产线具有技术先进，生产稳定可靠，产品优质，施工时间短，经济效益高的优点。

The wire rod production line provided by MEPC enjoys the merits of advanced technology, reliable production, premium product, short construction time and high economic benefits.

10. 推理决策的设计与实现策略面向企业级工时定额的推理决策方法是本文研究的重点。

Design and implementation of reasoning decision strategies. Reasoning decision strategies oriented to enterprise man-hour rationing level, is one of focus of this thesis.

11. 结合苏州街站的设计与施工情况，对地铁车站使用PBA法暗挖施工时的施工工法进行了分析研究。

With the design and construction conditions of Suzhoujie station, the author analyzes and studies the construction methods with PBA underground cut construction method in metro station.

12. 对民航座椅工时定额制定方法进行研究，建立了工时定额系统总体结构，并提出了其实现方法。

The structure frame of the man-hour quota calculation and its development for the civil aviation seats manufacturing are presented.

13. 研究了已知总加工时间的两台同类机半在线问题。

A semi on-line version on two uniform machines with the given total processing time is studied.

14. 研究目的：预应力混凝土连续梁采用满布支架施工时，常常因为现场浇注的混凝土量过大，而不得不分段进行施工。

Research purposes: the segmental casting method is often used in the full framing construction of prestressed concrete continuous girder because concrete casting in-site is too much.

15. 研究结果表明，水平平行顶管施工时中间区域受到双重扰动，产生的地面沉降较大。

It shows that the ground settlement produced by middle zone is greater because of double disturbance during parallel pipe jacking construction.

16. 本文的研究结果表明，双端面磨削可以在很短的加工时间内获得极高的表面光洁度、高的精度和高的磨除率。

Preliminary results presented in this report showed that double side grinding produces very good surface finish, a high precision, and high material, removal rates, in short processing.

17. 主要研究两台机器环境下的以加权完工时间和为目标函数的越库调度问题。

The paper studies the schedule problem of cross docking distribution in the situation of two machines, which objective function is the total weighted completion time.

18. 文中分析了在极不均匀电场下间隙的击穿过程，并用试验研究了微细加工时电极极性对间隙击穿电压的影响。

The process of dielectric breakdown in uneven electric field is analyzed and the influence of electrode polarity on gap breakdown is researched.

19. 推理决策的设计与实现策略面向企业级工时定额的推理决策方法是本文研究的重点。

Reasoning decision strategies oriented to enterprise man-hour rationing level, is one of focus of this thesis.

20. 由于各种原因，在实际生产过程中存在很多不确定性，本文所研究的是一种加工时间不确定的FSSP。WwW.WeNtiyI.cOm

This paper mainly research on FSSP with uncertain processing times, considering both uncertainty and reducing the affect of the disturbance as much as possible.

21. 研究具有链式约束的单机随机排序问题，目标函数为加权总完工时间的数学期望。

This paper discusses the stochastic scheduling on a single machine to minimize total weighted completion time subject to precedence constraints of chains.

22. 根据试验研究结果提出了该技术加固梁柱节点的设计和施工时的建议。

Finally, some suggestion is put forward for design and construction about using the technique to strengthen beam-column joint.

23. 提出并研究两台机器环境下的以带权总完工时间为目标函数的越库配送排序问题。

This paper considers the cross docking distribution scheduling problem, with the objective to minimize the total weighted completion times.

24. 研究了热处理工艺（包括均匀化处理、淬火方式和人工时效等）对6063铝合金组织和力学性能的影响。

The effect of heat treatment(including homogenizing treatment, quenching method and artificial aging)on the structure and mechanical property of 6063 aluminum alloy was studied.

25. 对于大型复杂钢结构需要研究施工时结构的变形和内力变化。

For flexible large span steel structures, the investigation of the deformation and stress in construction process can not be neglected.

26. 分析了硬质合金微型钻头加工时的受力状态，根据钎焊硬质合金刀具的强度指标要求，研究了刀具焊接强度的检测方法。

The cutting loads of cemented carbide drilling tool in drilling PCB are analyzed, a method applied to testing the brazing strength of cemented carbide cutters is studied.

27. 但科克指出，该研究调查的是适度上网、或上网时间不到总工时20%的人。

However, Coker said the study looked at people who browsed in, or were on the Internet for less than 20 percent of their total time in the office.

28. 但科克指出，该研究调查的是适度上网、或上网时间不到总工时20%的人。

However, Coker said the study looked at people who browsed in, or were on the Internet for less than 20 percent of their total time in the office.