
词语导航
基本信息
词语:温度测量的
繁体:溫度測量的
拼音:wēn dù cè liáng de
英语翻译
【医】 thermometric
分词翻译
温度的英语翻译:
temperature
【化】 temperature
【医】 T; temperature
测量的英语翻译:
guage; measure; meterage; scale; survey
【化】 measurement
【医】 measurement; mensuration; survey
【经】 calibration; take the gauge of
翻译例句
1. 给出了单片机温度测量的软件流程图。
The temperature measuring software flowchart of MCU is provided.
2. 介绍了一种高精密温度测量的原理和方法。
The principle and method of high precise temperature measurement are introduced.
3. 介绍了一种高精度温度测量的原理与方法。
The paper introduces the principle and method of high precise temperature measurement.
4. 碳电阻温度计是低温温度测量的常用温度计之一。
The carbon thermometer is one of the commonly used thermometers that measure temperature in cryogenic engineering.
5. 同时在软件上利用过采样技术提高温度测量的精度。
Using over sampling technology in software the accuracy of temperature measurement is increased.
6. 讨论了用于温度测量的非稳态一维线性导热反问题。
A one-dimensional linear inverse heat conduction problem for temperature measurement is presented in the paper.
7. 本文讨论了固体表面温度测量的误差及两种减小误差的方法。
The error of surface temperature measurement of solid body and two methods for lessening it are described in this paper.
8. 本文提出了一种可用于微细尺度流体温度测量的激光云纹技术。
A laser moire technique applicable for temperature measurement mini or micro scale flow is first proposed in this paper.
9. 阐述温度测量的基本原理、类型,并对热电耦温度计进行试制作。
This paper describes the fundamental of thermometry and the types of thermometer.
10. 热沉能够保证有效地减小温度计上的热负荷,提高温度测量的精确度。
The heat sink can effectively guarantee the reducing of the heat load on the thermometer, and improve the accuracy of temperature measurement.
11. 介绍了温度测量及调制吸收光谱技术原理,分析了调制幅度对气体温度测量的影响。
Temperature measurement principle and modulation absorption spectroscopy were introduced, and the influence of modulation amplitude on gas temperature measurement was analyzed.
12. 分析了石英温度传感器非线性、频率不确定度、过热效应等因素对温度测量的影响。
The influence on temperature measurement of the non-linearity, the fractional frequency uncertainty and the overheating effect of quartz temperature sensor have been analyzed.
13. 运用热沉能够有效地减小由引线导热引起的温度计的热负荷,提高温度测量的精确度。
Utilizing heat sink is effective to reduce the thermometer heat load due to the thermal conductor of the leads, and to increase the accuracy of the temperature measurement.
14. 在大空间火灾实验中,由于测温系统的庞大和复杂,导致影响温度测量的误差因素增多。
As the temperature measure system is large and complex in the large space fire test, the factors affecting measurement precision increase.
15. 研究了用电加热法解决用于动态气流温度测量的小惯性热电偶时间常数的实验测定问题。
This paper studies the method of measuring the time constant of the fast thermocouples which are used to measure a dynamic temperature in air flows.
16. 分析了电子镇流器额定最高温度的定义,建立了电子镇流器额定最高温度测量的热阻模型。
The definition of ballast rated maximum temperature was analyzed, a thermal resistance model for measurement of ballast rated maximum temperature was set up.
17. 传统的冷库温度控制技术对库房温度测量的准确性不高,而且不能满足节能和智能化要求。
The traditional cold storage temperature control technology can not get the temperature accurately and can"t meet the requirements of energy saving and intelligent control.
18. 假如参考端温度的变化没被补偿,就会有相应的毫伏电压变化,结果会导致温度测量的误差。
Should there be an uncompensated variation in the reference junction temperature, there will be a corresponding change in millivolt with a resultant error in temperature measurement.
19. 机械温度测量的顶级产品是给最高要求的测量任务的,它不仅可以测量,还可以进行开关控制。
The master class of mechanical temperature measurement is reserved for the most demanding measuring tasks and can, not only measure, but also switch.wwW.WeNTIyI.Com
20. 根据细铜丝电阻值与温度的关系来确定石英管外壁的温度值,实现了定热流加热与温度测量的同步。
The wall average temperature was obtained according to relationship between wire resistance and temperature and achieved the synchronization of heating and measuring temperature.
21. 基于此模型对传感器内外层结构、物性参数和边界条件等影响传感器温度测量的各个因素进行分析。
Influencing factors on thermometry such as the structure of the sensor inner and outer layers, thermal properties and boundary conditions are discussed.
22. 研究表明,红外热谱图可以正确地反映建筑结构表面的温度场分布,解决了固体表面平均温度测量的难题。
The research indicates that the thermal infrared spectrum correctly reflects the temperature distribution, solving the puzzle of the average temperature measurement on solid surfaces.
23. 本文叙述了用作温度测量的某些光纤传感器的基本原理、近期进展及技术特性,并提出了某些技术问题和观点。
The basic principles, resent developments and technical specifications of several fiber-optic sensors for temperature measuring are described. Some technical questions and views are put forward.
24. 探讨了加氢反应器床层温度测量的重要性及必要性,阐述了测温点的布置、热电偶的安装方法及优缺点,提出了改进措施。
The importance and necessity of hydro-reactor bed multipoint thermocouple, how to lay the thermocouple point, the structure and function about thermocouple is presented. Advanced type is introduced.
25. 同时还根据理论模拟的结果讨论了当前得到的核物质量热曲线中可能存在的问题,提出了进一步开展核物质量热曲线研究中温度测量的一些措施。
According to the research and simulation the measured caloric curve has been discussed and some Suggestions for further investigation of nuclear temperature were pointed out.
26. 其他科学家已经提议,要利用这个网络体系来追踪洋流,测量海洋和全球温度的变化。
Other scientists have proposed to use the network for tracking ocean currents and measuring changes in ocean and global temperatures.
27. 我们测量了温度的变化。
We measured the difference in temperature.
28. 第零定律,使你可以定义温度的概念以及通过温度计测量温度。
Zeroth law, then, allows you to define the concept of temperature and the measurement of temperature through a thermometer.
29. 第零定律,使你可以定义温度的概念以及通过温度计测量温度。
Zeroth law, then, allows you to define the concept of temperature and the measurement of temperature through a thermometer.
版权声明:问题易所有作品(图文、音视频)均来源网络,版权归原创作者所有,与本站立场无关,如不慎侵犯了你的权益,请联系我们告知,我们将做删除处理!
