粘合强度用英语怎么说，粘合强度的英文翻译

词语导航

基本信息

词语：粘合强度

繁体：粘合強度

拼音：zhān hé qiáng dù

英语翻译

【化】 adhesive strength; bond strength

相关词条

1.bondstrength  

分词翻译

粘合的英语翻译：

agglutinate; glue
【化】 adhere; adherence; adherency; adhesion; bind(ing); bonding
【医】 conglutinatio; conglutination

强度的英语翻译：

intension; intensity; strength
【计】 intensity
【化】 strength
【医】 intensity; strength

翻译例句

1. 鞋类。成鞋试验方法。帮底粘合强度。

Footwear. Test methods for whole shoe. Upper sole adhesion.

2. 胶带的粘合强度对于测试结果的可重复性非常关键。

The bond strength adhesive tape for repeatability of test results is critical.

3. 经过处理后的电解铜箔耐蚀性、耐热性和粘合强度等性能指标均有明显提高。

After the plating, corrosion resistance, heat resistance and binding strength of electrolyte copper foil were improved.

4. 粘合强度可以通过选择正确的基体材料、表面处理、胶粘剂和工艺参数得以保证。

The bonding strength is ensured by the correct choice of substrate material, surface preparation, adhesive and process parameter.WWW.WeNTiyI.cOm

5. 在另一实施方案中，至少一个组件表现出与偏二氯乙烯聚合物类似的层间粘合强度。

In another embodiment, at least one component exhibits interlayer adhesion strength similar to vinylidene chloride polymers.

6. 按照国家标准的要求，采用计算机技术，研制了橡胶拉伸性能和粘合强度自动测定系统。

According to adhesion properties of rubber and the requirements of national standard, computer technology to develop the automatic determination system was adopted.

7. 采用本法橡胶与金属的粘合强度可与 “间―甲―白”系统比美，胶料的压缩永久变形性能改善。

The bonding strength of the rubber and the metal of the method is comparable to the "resorcinol-formaldehyde-silica" system and the compression set of the rubber material is improved.

8. 用新粘合剂进行了力学试验、初始粘合强度试验和快速环境试验，结果表明其性能与传统产品相当。

Test results with the new adhesives, including mechanical testing, primary adhesion and accelerated environmental testing show performance equivalent to the traditional products.

9. 对不同规格瓦楞纸箱的平压强度、边压强度、粘合强度和戳穿强度进行了试验，分析成型工艺对瓦楞纸箱强度的影响。

The flat crush resistance, edgewise crush resistance, conglutinated strength and puncture strength of corrugated box with different shapes was tested.

10. 芳纶帘子线与橡胶的粘合强度除了与帘子线的表面处理有关外，芳纶帘子线的浸胶工艺对其粘合性能也有较大的影响。

The adherent strength of Aramid cord filament to rubber relates to the surface treatment of the cord filament. The soaking technology has large influence on its adherent character as well.

11. 采用正交实验法研究硼砂和TDI的加入量对PV A粘合剂的耐水性能和剥离强度的影响。

Using the orthogonal matrix experimental method, the effects of borax or TDI on the PVA adhesive were discussed.

12. 通过PV C -MBS片材的热粘合样品的剪切强度试验，也可观察它们界面的相容程度。

The interfacial compatibility can also be observed through the shear strength test of the PVC-MBS heat adhesive sheet.

13. 为了在制造过程中增强其使用强度，通常在板材成分中加入少量有机与无机粘合剂。

In order to provide handling strength during the manufacturing process, small quantities of organic and inorganic binders are typically added to the board formulation.

14. 涂层加工技术对粘合衬布的剥离强度、手感、渗料性等性能有直接影响。

Coating technology can directly influence the properties of the lining cloth such as peeling strength, feel, permeability, etc.

15. 这种新型粘合剂的粘接强度完全满足了正畸粘合剂的要求。

The bonding strength of the new adhesive completely meets the requirements of orthodontic adhesives.

16. 选择合适的粘合剂种类和含量可以提高延期药的抗压强度和抗冲击性能。

The right kind and content of the bond enhance the crushability intensity and the resist impact capability.

17. 叙述了以聚乙烯醇为原料，经缩醛化后和硅溶胶制备有机—无机复合粘合剂。介绍了配方、制备程序和拉伸粘结强度的试验结果。

The paper introduces the formula, process and tensile strength of the organic-inorganic composite adhesive which is prepared by mixing acetalization of polyvinyl alcohol with silicasol.

18. 介绍一种粘结强度大、固含量高、低毒环保型的脲醛树脂粘合剂的合成方法。

A novel method for producing urea formaldehyde resin with intensive viscidity, high solid content and low toxicity is introduced in this report.

19. 利用土壤粘合剂对土壤进行粘结，以改善土壤的粘结性能，达到提高土壤压缩强度的效果；

The bonding performance can be modified by use of soil binder and enhanced soil compression strength was achieved.

20. 树脂砂铸造中，增强树脂硅砂的粘合性，提高型砂强度及抗湿性。

When used in the sand casting of resin, it can strengthen the adhesion, improve profile sand strength and antiwetting property.

21. 运动时使面纸与单面瓦楞纸在 滚面上充分粘合，而不产生滑差，解决原有技术中纸板强度差的现象无需加热装置；

The facial tissue and single-face corrugated paper can fully glued when in motion to avoid slip, which can solve the problem of worse strength without heating device;

22. 产品具有外观整洁、粘合力强、不残胶、强度高、在剪切时不会引起变形等特点。

Products with the appearance of clean, strong adhesive, non-residue, high intensity, the shear will not cause deformation and so on.

23. 分散体中表面活性剂浓度的降低改善了用所述分散体制备的粘合剂的内聚强度。

The reduction of the surfactant concentration in the dispersions improves the cohesive strength of adhesives made with the dispersions.

24. 通过对实验结果的分析，探讨了胶粘剂的粘合机理以及影响粘接强度的各种因素。

Through an analysis of experimental result, we have discussed the bonding mechanism of the adhesive, and the influencing factors of bonding intensity.

25. 在随着封闭型腔上浮的过程中成型砖坯依然受着压力，其泥料间的粘合力大大增加，从而提高了砖坯的整体强度和边部的成型效果。

In the floating process of the closed cavity the formed tile is still being pressured so as to increase its adhesive force, consequently the tile is strengthened and its edges improved.

26. 高强度粘合，强度高的材料。

High strength adhesion, high strength of material.

27. 该剥离薄膜在基底和和剥离层之间提供改善了的粘合力，以及在剥离层和粘附体之间提供极好的剥离强度。

The peeled film has improved adhering between the base and the peeled layer and high peeling strength between the peeled layer and the adhered body.

28. 应用于压敏胶、粘合剂行业，能提高热熔胶和压敏胶的初粘性、持粘性、柔韧性和增加粘接强度。

Used in pressure sensitive adhesives, adhesives products. It can improve initial grad and permanence, flexibility, felt intensity of hod melt adhesive.

29. 应用于压敏胶、粘合剂行业，能提高热熔胶和压敏胶的初粘性、持粘性、柔韧性和增加粘接强度。

Used in pressure sensitive adhesives, adhesives products. It can improve initial grad and permanence, flexibility, felt intensity of hod melt adhesive.