均匀冷却用英语怎么说，均匀冷却的英文翻译

词语导航

基本信息

词语：均匀冷却

繁体：均勻冷卻

拼音：jūn yún lěng què

英语翻译

【化】 uniform cooling

相关词条

1.uniformcooling  

分词翻译

均的英语翻译：

all; equal; without exception

匀的英语翻译：

divide evenly; even; spare

冷却的英语翻译：

cool; cooling; refrigeration
【计】 chilling; cooling
【化】 cooling
【医】 cooling; refrigeration

翻译例句

1. 迅速冷却提高了生产效率，而均匀冷却改善了塑件质量。

The rapid cooling increases the productivity, while the uniform cooling improves plastic product quality.

2. 焊接过程对被焊工件来说，是局部的不均匀加热过程和不均匀冷却过程。

The welding process of the welding workpieces, uneven heating process is partial and uneven cooling process.

3. 筒体夹套内可通入冷冻盐水或冷却水，通过搅拌，使料液均匀冷却，控制醇沉所需温度。

Cold salt water or cooling water can be poured into the jacket. The liquor is stirred and cooled evenly, thereby obtain desired temperature for ethanol precipitation.

4. 筒体夹套内可通入冷冻盐水或冷却水，通过搅拌，使料液均匀冷却，控制醇沉所需温度。

Cold salt water or cooling water can be poured into the jacket. The liquor is stirred and cooled evenly, thereby obtain desired temperature for ethanol precipitat …

5. 依据二冷均匀冷却的思想，重新设计并优化了二冷喷淋结构和喷嘴的布置，增加了一个二冷喷淋段。

According to the idea of uniform cooling in secondary cooling zone, the spraying cooling structure and the disposal of nozzles are redesigned and optimized, and one spraying cooling zone is increased.

6. 均匀抽运及均匀冷却是激光二极管抽运激光器减小热致光学畸变以实现高光束质量输出的核心技术难题。

Uniform pumping and uniform cooling are key techniques to reduce thermo-optical distortion and to achieve high beam quality output for solid-state laser.

7. 并通过不同冷却流道所影响的型坯温度场的比较，揭示了整体均匀冷却在定型模冷却系统设计中的重要意义。

By comparison different temperature field which are affected by the lay-out of cooling section, this paper uncovers the importance of uniform cooling when design cooling section of calibrator.

8. 为使型砂获得预期的冷却和增湿效果，要求型砂在沸腾床上均匀的流动。

In order to obtain the expected sand cooling and humidifying effect, requiring sand in the boiling bed to flow in uniform.

9. 因此，水室的形状应有利于冷却水量在管束中的均匀分配。

Therefore, the shape of water chamber is in favor of uniform distribution of cooling water volume in tube bundle.

10. 检查冷却中的非均匀性。

Check for non-uniformity in cooling.

11. 这种新型的换热结构可以在被冷却面上造成强烈的导热效应，从而形成均匀的温度分布。

This new flow pattern can induce a strong heat conduction effect in the cooled plane, and develop a uniform temperature distribution.

12. 结果表明，钢板中有较多的非金属夹杂物及轧后冷却速度过快和冷速不均匀是导致冷弯性能不合格的主要原因。

The result shows that the inclusion, high cooling speed and uneven of cooling speed after rolling are the main reasons for steel plate cold bending rupture.

13. 本机通过水循环加热和冷却，让溶蜡更加均匀。

The machine through the water circulating heating and cooling, let dissolve wax more uniform.

14. 果蔬差压通风预冷包装箱的开孔大小及包装箱两侧的压差是影响预冷速度、冷却均匀性的重要参数。

The vent hole size and the pressure drop are the important parameters which affect cooling rate and cooling uniformity in pressure pre-cooling of fruit and vegetable.

15. 本文研究了纺丝温度、组件过滤介质、冷却吹风管理以及切片质量等影响DTY染色均匀性的纺丝工艺条件。

The spinning conditions which influence the dyeing evenness of polyester DTY including spinning temperature, filter medium, air cooling and the chips quality are investigated.

16. 针对传统气氛炉的温度均匀性差、自动化程度低、冷却速度慢等一系列问题提出全面优化设计方案，并取得了良好的效果。

Comprehensively optimal design plans for the conventional controlled atmosphere furnace were proposed to counter its bad temperature uniformity, low automatic control level and low cooling speed.

17. 退火。退火工艺的组成为把钢加热到一定温度并保持一段时间，通常再缓慢冷却。退火是为了产生均匀化从而建立起有一致的特有性质的标准均匀化组织。

Tool steel is generally purchased in the annealed condition. Sometimes it is necessary to rework a tool that has been hardened, and the tool must then be annealed. For.

18. 真空定径冷却，确保产品的精确圆度，壁厚均匀。

Vacuum calibration tank can be assures the accurate round and even capacity.

19. 干煤/冷却介质（气体或空气）均匀的穿过冲孔板上被输送的产品层。

The drying/cooling medium (gas or air) evenly penetrates the product bed which is being conveyed across the perforated plate.

20. 株，可引入微分收缩，冷却不均匀，或不均匀流量。

Strains can be introduced by differential shrinkage, uneven cooling, or nonuniform flow.

21. 同时还表明随着带钢厚度增加，超快速冷却条件下厚度方向的温度梯度显著增大，对于带钢内部组织的均匀性将产生不利的影响。

With increasing the thickness, the temperature gradient in thickness direction is larger for the same cooling intensity, which would affect the uniformity of the microstructure in strip.

22. 模具的冷却系统应该保证迅速和均匀的冷却。

The system should ensure rapid and uniform cooling.

23. 倒入冷却的蛋糕皮中，小心的使之均匀的分布。

Pour filling into cooled crust; carefully spread to edges.

24. 部件设计与铸造技术必须保证金属成分与结构始终保持均匀、冷却率均匀分布。

Component design and casting techniques must ensure that metal composition and structures remain uniform throughout and that cooling rates are evenly distributed.

25. 食品真空冷却装置是一种冷却速度快，冷却效果均匀、卫生的新型熟制食品生产设备。

Food vacuum cooling equipment is a new type boiled food production equipment which has quick cooling rate, even cooling effect and health.

26. 中厚板控制冷却时钢板的长度方向温度不均，冷却过程加剧了钢板纵向的温度不均匀性。

Uneven temperature already existed in plate lengthwise direction before cooling, and the uneven temperature tendency was aggravated after it cooled.

27. 缸盖铸件在冷却过程中由于收缩不均匀产生变形，导致气道位置偏差。

Due uneven contraction, the cylinder head castings often deform and cause deviation of the ports position.WWw.WenTiYI.COm

28. 缸盖铸件在冷却过程中由于收缩不均匀产生变形，导致气道位置偏差。

Due uneven contraction, the cylinder head castings often deform and cause deviation of the ports position.