接触尺寸用英语怎么说,接触尺寸的英文翻译


词语导航

基本信息

词语:接触尺寸

繁体:接觸尺寸

拼音:jiē chù chǐ cùn

英语翻译

【计】 contact size

分词翻译

接触的英语翻译:

contact; contiguity; get in touch with; meet; osculate; osculation; tangency
touch
【医】 c.; contact; contiguity; hapt-; hapto-; per contiguum; taction; tactus
touch

尺寸的英语翻译:

dimension; measure; measurement; size
【化】 dimension
【医】 dimension

翻译例句

1. 它们的种子的顶端向上生长,其距离地面的高度刚好可以接触到风;它们的体型大小也刚好是生长所需的尺寸;它们的茎是空心的,且仅仅是通过体内的含水量来保持自身的坚挺。

Their seed heads raised just high enough above the ground to catch the wind, the plants are no bigger than they need be, their stems are hollow, and all the rigidity comes from their water content.

2. 在购买的时候,用户必须检查钨钢件导线板的尺寸和线槽的精度、光洁度,特别是和线轮接触的圆弧部分的圆度。

At the time of purchase, the user must check the slot size and a wire board tungsten steel precision, smoothness, especially with the line wheel and the arc part of roundness.

3. 测量过程中应用了有限尺寸接触电极修正理论。

In the measurement, the finite size contact modification technology is applied.

4. 滚动轴承。单列角面接触的球轴承。外圈非推力边的倒圆角尺寸。

Rolling bearings. single - row angular contact ball bearings. chamfer dimensions for outer ring non - thrust side.

5. 检验灯在灯座中有关接触性能的尺寸。

To check lamp dimensions for contact making in IEC holders.

6. 分析了砂轮磨损对准平面二次包络环面蜗杆传动的蜗杆几何尺寸以及接触和运动精度的影响。WwW.WENTiYI.coM

It analyzes the influence of the grinding wheel wear on geometric size and teeth contact of worm gear, kinematics precision of the quasi-plane double enveloped hourglass one.

7. 尺寸稳定,在成型过程中,塑件与模具接触的面要比离开模具部分的尺寸稳定性更好。

Four, the size is stable, in the molding process, the plastic part and the mold contact surface compared to leave the mold part the size stability to be better.

8. 必须有效控制支承辊两侧轴承座的间距、保持密封件唇口良好接触状态及采用性能、尺寸合格的备件。

To control the clearance between both sides of bearing chuck in back-up roll, keep sealing tips in a good touching state and use correct spare parts both in function and dimension.

9. 为了分析不同尺寸条件下扩底墩的承载机理,利用三维有限元,建立墩土接触模型,分析不同墩身长度、扩底直径以及扩大头锅底高度时扩底墩的承载性状。

In order to analyze the bearing mechanism of belled pier with different dimensions, by three-dimensional finite element, a contact model of pier and soil was established.

10. 接触区尺寸采用印痕法测量。

The dimension of contact region is measured by means of stamp method.

11. 外壳尺寸小,高密封性,麻花针接触端子,应用在医疗,仪器仪表和数字卫星系统等领域。符合MIL-C-83513标准。

Very small, high density interconnect with twist pin contact for demanding digital applications including medical, instrumentation and satellite systems. Versions to meet MIL-C-83513 specifications.

12. 根据这些直线族,可以由已知的压头曲率和外载荷确定接触区尺寸。

Based on the above straight lines, the contact zone can be determined from the known indentor curvature and loading.

13. 采用平面应力弹性理论,对吊车车轮与轨道的接触区尺寸进行理论分析。

The contact zone width of crane wheel with track is analyzed by plane stress elastic theory.

14. 这种方法在测量非常小的样品时特别有用,因为这时样品的尺寸和接触点的距离并不重要。

This method is particularly useful for measuring very small samples because the dimensions of the sample and the spacing of the contacts are unimportant.

15. 利用CCD进行尺寸测量是一种非常有效的非接触检测方法,这种方法被广泛的应用于零件尺寸的精密测量中。

Measurement with CCD is a very effective non-contacted method for the dimensional measure, which is now widely applied to the precision measure of the part dimension.

16. 给出了剪切应力强度因子和裂纹面接触区尺寸的数值结果。

The numerical results of shear stress intensity factor and the length of the crack face contact region are given.

17. 分析结果表明,引起针尖尺寸效应的主要原因是由于压头尖端曲率半径的存在导致对压入过程中接触深度的估计过低。

The simulation results indicate that the tip size effect in nanoindentaion is caused mainly by the underestimate of the contact area due to the indenter bluntness.

18. 非接触式气动传感器测量技术是机械零件尺寸测量和控制的一种重要方法。

The measurement technique of non-contact pneumatic sensor is an important method in the dimension measurements of machine parts.

19. 一个连接到该手柄头部的多孔性涂药器,该涂药器具有适合接触人皮肤的局部区域的尺寸;

An apparatus including a head, and an applicator coupled to the head, the applicator having dimensions suitable for contacting localized areas of human skin.

20. 针对传统接触式测量方法的局限,本文提出一种基于IMAQ实现工件尺寸非接触在线实时测量的方法。

Due to the limitation of the contact measurement, a non-contact measure work-piece dimension of method was put forward, which is based on IMAQ.

21. 直接接触极化方式极化的面积能够达到基板的尺寸。

Besides, contact poling can provide poling size as large as the substrate size.

22. 二维非接触式人体测量系统中,对人体围度尺寸的预测非常重要。

The estimation of body dimension is very important in the two-dimensional non-contact body measurement system.

23. 该系统具有检测速度快、精度高、非接触检测、闭环控制等特点,完全适用于回转体直径尺寸的在线检测和控制。

The system had many features such as high speed, high accuracy, untouched measuring and closed-loop control. The system is used on-line measuring and control of diameter measure.

24. 而且那些时尚的人们允许他在帮他们测量尺寸是接触他们!

And yet fashionable persons allowed him to touch them with his measuring tape!

25. 最大接触压力随R值的增大而逐渐减小,且R值的改变对于小尺寸油封最大接触压力的影响较大;

The maximum contact pressure is decreased with the increase of the R value, and the change of R value has more remarkable influence on the maximum contact pressure of the small dimension oil seal.

26. 个体接触分隔栅栏的慨率呵使用常数来表示,即接触慨率与个体尺寸无关;

The probability contacting grid of shrimps could be indicated by a constant, which means the contact probability was independent of individual size.

27. 插针的直径尺寸符合要求与否直接影响着电连接器接触点的稳定性。

The contact diameter size directly influences the electric reliability of the electronic system.

28. 综合考虑了接触线应力集中系数、尺寸系数、表面质量系数和材料疲劳强度的影响,得到了接触线疲劳极限的统计特征。

Statistical characteristic of fatigue strength of contact wires was obtained by comprehensively considering such coefficients as stress concentration, size and surface quality.

29. 综合考虑了接触线应力集中系数、尺寸系数、表面质量系数和材料疲劳强度的影响,得到了接触线疲劳极限的统计特征。

Statistical characteristic of fatigue strength of contact wires was obtained by comprehensively considering such coefficients as stress concentration, size and surface quality.

版权声明:问题易所有作品(图文、音视频)均来源网络,版权归原创作者所有,与本站立场无关,如不慎侵犯了你的权益,请联系我们告知,我们将做删除处理!