流体射流用英语怎么说,流体射流的英文翻译


词语导航

基本信息

词语:流体射流

繁体:流體射流

拼音:liú tǐ shè liú

英语翻译

【化】 fluid jet

分词翻译

流体的英语翻译:

fluid; liquid; water
【化】 fluid

射流的英语翻译:

【化】 jet flow
【医】 efflux

翻译例句

1. 本文运用流体射流原理,对新型双曲线煤烧珍珠岩膨胀炉进行了分析探讨,并从实例进行了分析验证。

In this Paper, a new tyPe of hyperbolic coal furnace of Pearlite expansion is discussed according to the principle of fluidics. Living examples are used for verification.

2. 正因为这一原因,井眼设计人员一般寻求使流体速度(或其它射流能量)最大化的方法去达到最大程度地清洁井底的目的。

For this reason, the well designer generally seeks to maximize the fluid velocity (or other measure of jet energy) to achieve maximum cleaning at the bottom of the hole.

3. 根据流体力学射流理论,分析了空气幕在综采工作面隔离粉尘的作用,并根据综采工作面应用空气幕隔尘的特点,设计了空气幕。

An air curtain was designed according to the jet theory of fluid mechanics and the role and feature of air curtain to separate dust in a fully mechanized face.

4. 用层流边界层方程,导出幂律流体轴对称层流自由射流的常微分方程,并给出其方程的数值解。

The ordinary differential equation of round laminar jet of power-law fluid is derived, and the solution of this equation by numerical integration is obtained.

5. 本文应用流体力学理论分析了高压均质过程中,微孔射流内动量及流场结构。

This paper introduces the momentum and flow field of tiny-hole jet-flow in high-pressure homogenization processing by applying fluid dynamics.

6. 本文研究了喷嘴形状和高聚物添加剂对高压水射流性能的影响,给出了一种分析喷嘴内流体流动的方法。

This paper focuses on the effect of polymer additives and nozzle shapes on the properties of high-pressure water jet. A method is presented to analyse the fluid flow within the nozzles.

7. 为此,国外某公司以流体动力学为基础,通过液流分析,探究了单孔和多孔氧枪的射流特征。

For this, foreign some company is a foundation with the hydrokinetics, pass current analysis, studied the efflux feature of weak opening and poriferous oxygen gun.

8. 通过对多孔介质、湍射流的振荡流等研究的叙述,说明尽管流动现象是很复杂的,但振荡流在工业与环境流体力学中具有广泛的应用。

The present paper elaborates the study of porous media, flutuating and oscillating flows to prove that oscillating flows are widely used in industrial and environmental fluid mechanics.

9. 虽然串联喷嘴阻力损失的增加,使射流平均能量有所降低,但射流的瞬时能量得到了调制,激励出更大的流体振荡。

Although the resistance force increase of series nozzles makes the average energy of jet flow decreased but it lets the instantaneous energy modulated to impel more fluid resonances.

10. 通过数值计算,得到了喷嘴出口自由射流与冲击射流情况下的流体速度、压力等参数分布情况,及这两种流场中的激波位置。

Through the numerical simulation, the distribution of those parameters such as speed, pressure of the free jet and impinging jet flow is obtained, also the position of shocks.

11. 本文首先从流体力学基本方程出发,分析了振荡脉冲射流对流体的热交换与质交换能力的促进作用。

The promotion effect of fluidic oscillating jet on heat transfer and mass transfer has been analysed from the point of View of fundamental equations of fluid mechanics, at beginning of the paper.

12. 结果表明,由于射流的卷吸及其与环境流体之间的相互作用,使得射流边界处具有很高的涡量;

It has shown from the experimental results that the vorticity near the jet boundary region is high in magnitude due to the interaction between the jet fluid and the entrained ambient fluid.

13. 在岩石动力学、流体力学、波传播理论的基础上建立了磨料射流切割岩层力学模型。

Mechanical model of rock slotting by abrasive jet is established on the basis of rock dynamics, fluid mechanics and wave propagation theory.WWW.wENtiYI.com

14. 射流是流体运动的一种重要类型,许多工程技术领域都需要应用到射流理论和射流技术。

Impinging jet is an important kind of fluid movement types, whose theories and techniques are widely used in many engineering fields.

15. 基于两相流体动力学的理论,建立空蚀射流切割装置中短管内的压力变化梯度的基本方程式;

Based on the theory of two-phase flow, the equation of the pressure gradient is found for the short pipe in cavitation jet cutting set.

16. 本文针对上述三个自由度的船舶运动,采用FORTRAN 77语言编制了辐射流体动力系数的计算机程序。

The program for solving the radiation fluid dynamics coefficients is worked out by using computer language FORTRAN77 considering the ship motion of three freedom degrees.

17. 影响磨料射流切割套管效率的因素很多,着重研究了磨料射流的工作参数以及流体介质性质对切割套管效率的影响。

Experimental study on the effects of operating parameters and fluid performance on casing cutting efficiency is introduced in this paper.

18. 由测量结果可知:在双叶片叶轮内,流体基本沿叶片吸力面流动,叶片压力面上的相对速度较低,在压力面出口出现了速度很低的回流区,有明显“射流-尾迹”特征。

The results indicated that in the two-blade impeller, the fluid mainly flowed along the suction side, the velocity is very small on the pressure side, and a typical jet-wake flow has been observed.

19. 可逆流体换向装置是决定气动式脉冲液体射流泵的流体输送效率的关键组成部件。

The Reverse Flow Diverter (RFD) is one of the key components affecting the liquid - delivered efficiency.

20. 深入研究了水射流导引激光加工系统的光学特性、水光纤的流体力学特性及耦合系统的关键技术。

The optical properties, and hydrodynamics characteristics, as well as the key coupling technologies between the non-diffracting beam and the water jet, have been deeply analyzed and researched.

21. 本发明涉及用于以高速微射流形式输送流体的设备和方法。

The present invention relates to a device and method for delivering a fluid in the form of a high-speed micro-jet.

22. 本文研究了超细金刚石微粉的流体分级技术,设计了一套射流分级器,并对金刚石微粉在水中的分散性进行了初步研究。

The technology of grading of micro diamond powder and the dispersion of micro powder in water are studied in this paper. At the same time a system of shooting flow grader is designed.

23. 射流体与进气管通过活络接头连接。

The jetting body is connected with the intake pipe through a flexible joint.

24. 辐射热传导计算是辐射流体力学数值模拟的重要组成部分,广泛应用于天体物理、惯性约束聚变等诸多领域。

The accurate and fast method for numerically solving radiation heat conduction, associated with the applications of astrophysics physics and Inertial Confinement Fusion (ICF) etc.

25. 利用光滑粒子流体动力学方法,计算了金属表面沟槽在冲击下的微射流现象,详细讨论了微射流对加载波前沿宽度的依赖性。

With smoothed particle hydrodynamics, we calculate the formation of micro-jet from the groove of metal surface, and reveal the dependence on the width of loading wave front.

26. 作为分析流体运动稳定性的有效工具,线性稳定性分析法在燃油射流雾化机理的研究中得到了广泛的应用。

As a useful tool to analyse the stability of fluid flow, linear stability analysis method is adopted widely in the studies of atomization mechanism of fuel.

27. 而热泵对引射流体压力的变化极为敏感,引射压力的微小变化可能导致热泵操作性能的急剧下降;

The heat pumps are very sensitive to the change of ejection fluid pressure. A minor change in the ejection pressure can lead to a drastic reduction in the heat pump operating performance.

28. 而热泵对引射流体压力的变化极为敏感,引射压力的微小变化可能导致热泵操作性能的急剧下降;

The heat pumps are very sensitive to the change of ejection fluid pressure. A minor change in the ejection pressure can lead to a drastic reduction in the heat pump operating performance.

版权声明:问题易所有作品(图文、音视频)均来源网络,版权归原创作者所有,与本站立场无关,如不慎侵犯了你的权益,请联系我们告知,我们将做删除处理!