
词语导航
基本信息
词语:热处理规范
繁体:熱處理規范
拼音:rè chǔ lǐ guī fàn
英语翻译
【化】 heat treatment regime; specification of heat treatment
分词翻译
热的英语翻译:
ardent; caloric; craze; eager; fever; heat; hot; warm
【化】 heat
【医】 calor; cauma; febris; fever; fievre; heat; hyperthermia; hyperthermy
phlegmasia; phlegmonosis; pyreto-; pyro-; therm-; thermo-
处理规范的英语翻译:
【计】 processing specification
翻译例句
1. 然后,采用合理的连续热处理规范,使车轮获得了良好的力学性能和金相组织。
Then, good mechanical property and microstructure is obtained by adopting reasonable continuous heat treatment specification.
2. 介绍了钛合金斜盘模锻工艺流程、热处理规范以及工艺要求,并进行工艺试制和应用。
The Titanium alloy swashplate"s pressure forging process, heat treatment criterion and process request are introduced and trial-manufactured.
3. 钢的焊接CCT图,是正确选择焊接材料、确定最佳焊接工艺、消除焊接裂纹、制订焊后热处理规范的重要依据。
Welding CCT diagrams of steels are the basic to select welding material, determine the optimum welding technology, relieve welding cracks and lay down standard of past heat treatment.wWw.wenTIyI.coM
4. 材料的热成型或冷成型的选择由卖方进行,但成型后热处理应符合相关材料规范的要求。
Selection of hot or cold forming of materials may be made by Vendor, but heat treatment after forming shall conform to the requirements of applicable material specifications.
5. 材料的热处理没有列在表3里的应根据相关材料规范执行。
The heat treatment of the material not listed in Table 3 shall be performed in accordance with the applicable material specification.
6. 对于铝合金检具变形引起的尺寸不稳定,给予规范的热处理和粘接装配,使发动机缸体用检具本体变形得到控制。
The dimension instability is caused by aluminium alloy deformation. The methods such as heat treatment and assembly to control the inspection device deformation are put forward.
7. 规范包括化学成分,机械性能,热处理,冶炼加工,硬度范围和NACE材料规范等详细信息。
The specifications give details of the chemistry, mechanical properties, heat treatment, melting and processing details, hardness limits and NACE instructions for the material in question.
8. 请您提供焊前预热和焊后预热处理的规范。
Please give the standards of the preheat before welding and those of the heat-treatment after welding.
9. 对带双侧异形凹槽铝合金壳体的材质选择、成形工艺以及热处理工艺规范进行了研究。
The material selection, the forming technology and the heat treatment rules of the aluminium alloy shell with two-sided special impression are studied.
10. 试验表明可疑数据与试样加工形状尺寸、试样热处理对中性、试样洛氏硬度试验送样装置对试样距离控制和各环节的规范操作有关。
The test results showed that the suspicious data was related to size of sample, concentration of sample heat treatment, control of sample submitting equipment on sample distance.
11. 试验表明可疑数据与试样加工形状尺寸、试样热处理对中性、试样洛氏硬度试验送样装置对试样距离控制和各环节的规范操作有关。
The test results showed that the suspicious data was related to size of sample, concentration of sample heat treatment, control of sample submitting equipment on sampled...
12. 对适用于青藏线机车车辆的Q345E钢的焊接性、焊接材料和焊接工艺进行了研究,对Q345E钢及其焊接接头进行了热处理试验,为Q345E钢焊接工艺规范的制定提供了依据。
The weld ability, weld material and weld process of the Q345E steel applied to the locomotive and rolling stock for Qingzang line are studied in this paper.
13. 为此,通过一定的工艺试验对这种钢的热处理性能进行进一步的探索,从而确定特定性能下的热处理工艺规范。
So it is meaningful to further study its heat treatment performance by process test, so that the heat treatment process standard is established to meet special requirement.
14. 为此,通过一定的工艺试验对这种钢的热处理性能进行进一步的探索,从而确定特定性能下的热处理工艺规范。
So it is meaningful to further study its heat treatment performance by process test, so that the heat treatment process standard is established to meet special requirement.
版权声明:问题易所有作品(图文、音视频)均来源网络,版权归原创作者所有,与本站立场无关,如不慎侵犯了你的权益,请联系我们告知,我们将做删除处理!
